主页 数据转换器 模数转换器 (ADC) 高速 ADC (≥10 MSPS)
主页
数据转换器
模数转换器 (ADC)
高速 ADC (≥10 MSPS)

ADS5204-Q1

已停产

双通道 10 位 40MSPS 数模转换器 - 符合汽车应用标准

立即订购
数据表
ADS5204-Q1 不再投入量产
此产品不再投入生产。新设计应考虑替代产品。
open-in-new 比较替代产品
功能与比较器件相同但引脚有所不同。
ADC10DL065 正在供货 双通道、10 位、65MSPS 模数转换器 (ADC) This product is an enhanced stereo codec with enhanced digital effects
ADC10040-Q1 正在供货 10 位 40MSPS 数模转换器 (ADC) - 符合汽车应用标准 This product is an enhanced stereo codec with enhanced digital effects

ADS5204-Q1

已停产
立即订购

产品详情

Sample rate (max) (Msps) 40 Resolution (Bits) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 300 Features Low Power Rating Automotive Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 275 Architecture Pipeline SNR (dB) 60.5 ENOB (Bits) 9.7 SFDR (dB) 75 Operating temperature range (°C) -40 to 85 Input buffer Yes
Sample rate (max) (Msps) 40 Resolution (Bits) 10 Number of input channels 2 Interface type Parallel CMOS, TTL Analog input BW (MHz) 300 Features Low Power Rating Automotive Peak-to-peak input voltage range (V) 2 Power consumption (typ) (mW) 275 Architecture Pipeline SNR (dB) 60.5 ENOB (Bits) 9.7 SFDR (dB) 75 Operating temperature range (°C) -40 to 85 Input buffer Yes
TQFP (PFB) 48 81 mm² (9 mm × 9 mm)
  • Qualified for Automotive Applications
  • 3.3-V Single-Supply Operation
  • Dual Simultaneous Sample-and-Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • Programmable Gain Amplifier: 0 dB to 18 dB
  • Separate Serial Control Interface
  • Single or Dual Parallel Bus Output
  • 60-dB SNR at fIN = 10.5 MHz
  • 73-dB SFDR at fIN = 10.5 MHz
  • Low Power: 275 mW
  • 300-MHz Analog Input Bandwidth
  • 3.3-V TTL/CMOS-Compatible Digital I/O
  • Internal or External Reference
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • TQFP-48 Package
  • APPLICATIONS
    • Digital Communications (Baseband Sampling)
    • Portable Instrumentation
    • Video Processing
  • Qualified for Automotive Applications
  • 3.3-V Single-Supply Operation
  • Dual Simultaneous Sample-and-Hold Inputs
  • Differential or Single-Ended Analog Inputs
  • Programmable Gain Amplifier: 0 dB to 18 dB
  • Separate Serial Control Interface
  • Single or Dual Parallel Bus Output
  • 60-dB SNR at fIN = 10.5 MHz
  • 73-dB SFDR at fIN = 10.5 MHz
  • Low Power: 275 mW
  • 300-MHz Analog Input Bandwidth
  • 3.3-V TTL/CMOS-Compatible Digital I/O
  • Internal or External Reference
  • Adjustable Reference Input Range
  • Power-Down (Standby) Mode
  • TQFP-48 Package
  • APPLICATIONS
    • Digital Communications (Baseband Sampling)
    • Portable Instrumentation
    • Video Processing

The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.

The ADS5204 is a dual 10-bit, 40 MSPS analog-to-digital converter (ADC). It simultaneously converts each analog input signal into a 10-bit, binary coded digital word up to a maximum sampling rate of 40 MSPS per channel. All digital inputs and outputs are 3.3-V TTL/CMOS compatible.

An innovative dual pipeline architecture implemented in a CMOS process and the 3.3-V supply results in very low power dissipation. In order to provide maximum flexibility, both top and bottom voltage references can be set from user-supplied voltages. Alternatively, if no external references are available, the on-chip internal references can be used. Both ADCs share a common reference to improve offset and gain matching. If external reference voltage levels are available, the internal references can be powered down independently from the rest of the chip, resulting in even greater power savings.

The ADS5204 also features dual, onboard programmable gain amplifiers (PGAs) that allow a setting of 0 dB to 18 dB to adjust the gain of each set of inputs in order to match the amplitude of the incoming signal.

The ADS5204 is characterized for operation from –40°C to +85°C and is available in a TQFP-48 package.
filter 查找其他 高速 ADC (≥10 MSPS)
下载

技术文档

未找到结果。请清除搜索并重试。
查看全部 1
顶层文档 类型 标题 格式选项 下载最新的英语版本 日期
* 数据表 Dual 10-Bit 40MSPS Low-Power ADC With PGA 数据表 (Rev. A) 2008-6-23

订购和质量