产品详情

Resolution (Bits) 24 Sample rate (max) (ksps) 32 Number of input channels 4 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode Internal Input voltage range (max) (V) 3.6 Input voltage range (min) (V) -1.3 Features PGA, Small Size Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 3.3 Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 3.6 SNR (dB) 100 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
Resolution (Bits) 24 Sample rate (max) (ksps) 32 Number of input channels 4 Interface type SPI Architecture Delta-Sigma Input type Differential, Single-ended Multichannel configuration Simultaneous Sampling Rating Catalog Reference mode Internal Input voltage range (max) (V) 3.6 Input voltage range (min) (V) -1.3 Features PGA, Small Size Operating temperature range (°C) -40 to 125 Power consumption (typ) (mW) 3.3 Analog supply (min) (V) 2.7 Analog supply voltage (max) (V) 3.6 SNR (dB) 100 Digital supply (min) (V) 1.65 Digital supply (max) (V) 3.6
TSSOP (PW) 20 41.6 mm² 6.5 x 6.4 WQFN (RUK) 20 9 mm² 3 x 3
  • 4 simultaneously sampling differential inputs
  • Programmable data rate up to 64 kSPS
  • Programmable gain up to 128
  • Noise performance:
    • 102-dB dynamic range at gain = 1, 4 kSPS
    • 80-dB dynamic range at gain = 64, 4 kSPS
  • Total harmonic distortion: –100 dB
  • High-impedance inputs for direct sensor connection:
    • Input impedance 330-kΩ for gains of 1, 2, and 4
    • Input impedance ≥ 1-MΩ for gains of 8, 16, 32, 64, and 128
  • Programmable channel-to-channel phase delay calibration:
    • 244-ns resolution, 8.192-MHz fCLKIN
  • Current-detect mode allows for extremely low power tamper detection
  • Fast startup: first data within 0.5 ms of supply ramp
  • Integrated negative charge pump allows input signals below ground
  • Crosstalk between channels: –120 dB
  • Low-drift internal voltage reference
  • Cyclic redundancy check (CRC) on communications and register map
  • 2.7-V to 3.6-V analog and digital supplies
  • Low power consumption: 3.3 mW at 3-V AVDD and DVDD
  • Packages: 20-pin TSSOP or 20-pin WQFN
  • Operating temperature range: –40°C to +125°C
  • 4 simultaneously sampling differential inputs
  • Programmable data rate up to 64 kSPS
  • Programmable gain up to 128
  • Noise performance:
    • 102-dB dynamic range at gain = 1, 4 kSPS
    • 80-dB dynamic range at gain = 64, 4 kSPS
  • Total harmonic distortion: –100 dB
  • High-impedance inputs for direct sensor connection:
    • Input impedance 330-kΩ for gains of 1, 2, and 4
    • Input impedance ≥ 1-MΩ for gains of 8, 16, 32, 64, and 128
  • Programmable channel-to-channel phase delay calibration:
    • 244-ns resolution, 8.192-MHz fCLKIN
  • Current-detect mode allows for extremely low power tamper detection
  • Fast startup: first data within 0.5 ms of supply ramp
  • Integrated negative charge pump allows input signals below ground
  • Crosstalk between channels: –120 dB
  • Low-drift internal voltage reference
  • Cyclic redundancy check (CRC) on communications and register map
  • 2.7-V to 3.6-V analog and digital supplies
  • Low power consumption: 3.3 mW at 3-V AVDD and DVDD
  • Packages: 20-pin TSSOP or 20-pin WQFN
  • Operating temperature range: –40°C to +125°C

The ADS131M04 is a four-channel, simultaneously-sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) that offers wide dynamic range, low power, and energy-measurement-specific features, making the device an excellent fit for energy metering, power metrology, and circuit breaker applications. The ADC inputs can be directly interfaced to a resistor-divider network or a power transformer to measure voltage or to a current transformer, shunt, or a Rogowski coil to measure current.

The individual ADC channels can be independently configured depending on the sensor input. A low-noise, programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify low-level signals. Additionally, this device integrates channel-to-channel phase calibration and offset and gain calibration registers to help remove signal-chain errors.

A low-drift, 1.2-V reference is integrated into the device reducing printed circuit board (PCB) area. Optional cyclic redundancy checks (CRCs) on the data input, data output, and register map maintain communication integrity.

The complete analog front-end (AFE) is offered in a 20-pin TSSOP package or a leadless 20-pin WQFN package and is specified over the industrial temperature range of –40°C to +125°C.

The ADS131M04 is a four-channel, simultaneously-sampling, 24-bit, delta-sigma (ΔΣ), analog-to-digital converter (ADC) that offers wide dynamic range, low power, and energy-measurement-specific features, making the device an excellent fit for energy metering, power metrology, and circuit breaker applications. The ADC inputs can be directly interfaced to a resistor-divider network or a power transformer to measure voltage or to a current transformer, shunt, or a Rogowski coil to measure current.

The individual ADC channels can be independently configured depending on the sensor input. A low-noise, programmable gain amplifier (PGA) provides gains ranging from 1 to 128 to amplify low-level signals. Additionally, this device integrates channel-to-channel phase calibration and offset and gain calibration registers to help remove signal-chain errors.

A low-drift, 1.2-V reference is integrated into the device reducing printed circuit board (PCB) area. Optional cyclic redundancy checks (CRCs) on the data input, data output, and register map maintain communication integrity.

The complete analog front-end (AFE) is offered in a 20-pin TSSOP package or a leadless 20-pin WQFN package and is specified over the industrial temperature range of –40°C to +125°C.

下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索,并重试。
查看全部 16
类型 项目标题 下载最新的英语版本 日期
* 数据表 ADS131M04 四通道同步采样 24 位 Δ-Σ ADC 数据表 (Rev. D) 2021年 5月 24日
白皮书 精确检测如何实现更高的系统性能和效率 (Rev. B) PDF | HTML 2023年 5月 10日
白皮书 How Accurate Sensing Enables Better System Performance and Increased EfficiencyK (Rev. A) PDF | HTML 2023年 4月 18日
白皮书 如何進行電源供應器設計 – 第 1 部分 (Rev. A) PDF | HTML 下载最新的英文版本 (Rev.B) PDF | HTML 2023年 4月 18日
应用手册 基于光纤光栅轨道计轴的数据采集系统 2022年 10月 10日
应用手册 电桥测量基本指南 PDF | HTML 下载英文版本 PDF | HTML 2022年 6月 8日
应用手册 基于两相罗氏线圈的电表模拟前端电路 (Rev. A) PDF | HTML 下载英文版本 (Rev.A) 2021年 10月 8日
应用手册 用于保护 ADS131M0x ADC 免受电气过载影响的电路 下载英文版本 PDF | HTML 2021年 9月 14日
应用手册 使用 Delta-Sigma 数据转换器的数据完整性通信方法 (Rev. A) PDF | HTML 下载英文版本 (Rev.A) PDF | HTML 2021年 9月 13日
电子书 Fundamentals of Precision ADC Noise Analysis 2020年 6月 19日
白皮书 如何通过中性断电功能检测和强化仪表防篡改功能 下载英文版本 2020年 2月 21日
EVM 用户指南 ADS131M04 Evaluation Module User's Guide (Rev. A) 2019年 6月 26日
技术文章 Leverage coherent sampling and FFT windows when evaluating SAR ADCs (Part 1) 2015年 3月 13日
应用手册 所选封装材料的热学和电学性质 2008年 10月 16日
应用手册 模数规格和性能特性术语表 (Rev. A) 下载最新的英文版本 (Rev.B) 2008年 10月 16日
应用手册 高速数据转换 下载英文版本 2008年 10月 16日

设计和开发

如需其他信息或资源,请查看下方列表,点击标题即可进入详情页面。

评估板

ADS131M04EVM — 汽车类四通道、24 位、64kSPS、同步采样 Δ-Σ ADC

ADS131M04 评估模块 (EVM) 是一款用于评估 ADS131M04 的平台,ADS131M04 是一款低功耗同步采样 Δ-Σ 模数转换器 (ADC)。

ADS131M04EVM 套件包括 ADS131M04EVM 板和支持随附计算机软件的精密主机接口 (PHI) 控制器板。

用户指南: PDF
TI.com 上无现货
应用软件和框架

ADC-ENERGY-METROLOGY-LIB-SW — ADC 能量计量库软件

ADC 能量计量库软件包使用高性能多通道模数转换器 (ADC) 实现了各种计量参数,通常用于测量电表、配电单元 (PDU) 和断路器的能量。

该 ADC 对通道在高达 8kHz 时的输出进行采样,以测量主交流电源各分支的电流和电压。该软件库在宽输入电流范围(0.05A 至 100A)内能达到很高的精度,在必要时还支持高采样频率,以实现独立谐波分析等高级电能质量功能。与集成片上系统 (SoC) 和应用特定的专用产品相比,通过使用独立 ADC 对电流传感器输出进行采样,可以让设计人员更加灵活地选择计量微控制器。

该软件包含可实现 ADC 与 Arm® Cortex®-Mx 微处理器 (...)

支持软件

ADS131M0x Example C Code (Rev. B)

SBAC254B.ZIP (64 KB)
仿真模型

ADS131M04 IBIS Model

SBAM423.ZIP (62 KB) - IBIS Model
计算工具

ADC-INPUT-CALC — 支持多种输入类型的模数转换器 (ADC) 输入驱动器设计工具

ADC-INPUT-CALC 是一种在线工具,可为设计模数转换器 (ADC) 的输入缓冲器提供支持。它提供 24 种不同的基于运算放大器的缓冲器电路,这些电路可用于驱动 ADC 输入。可用拓扑涵盖差分单端和变压器耦合输入设计。支持交流耦合和直流耦合设计以及单电源和双电源拓扑。提供两种模式:初学者模式和专家模式。在初学者模式中,设计人员先回答一系列问题,然后会看到解决方案原理图,在某些情况下,还会看到解决方案的可选版本。在专家模式下,设计人员会看到用方框图形式显示的所有 24 (...)
计算工具

ANALOG-ENGINEER-CALC — 模拟工程师计算器

模拟工程师计算器旨在加快模拟电路设计工程师经常使用的许多重复性计算。该基于 PC 的工具提供图形界面,其中显示各种常见计算的列表(从使用反馈电阻器设置运算放大器增益到为稳定模数转换器 (ADC) 驱动器缓冲器电路选择合适的电路设计元件)。除了可用作单独的工具之外,该计算器还能够很好地与模拟工程师口袋参考书中所述的概念配合使用。
模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用,包括业内超大的模型库之一,涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
模拟工具

TINA-TI — 基于 SPICE 的模拟仿真程序

TINA-TI 提供了 SPICE 所有的传统直流、瞬态和频域分析以及更多。TINA 具有广泛的后处理功能,允许您按照希望的方式设置结果的格式。虚拟仪器允许您选择输入波形、探针电路节点电压和波形。TINA 的原理图捕获非常直观 - 真正的“快速入门”。

TINA-TI 安装需要大约 500MB。直接安装,如果想卸载也很容易。我们相信您肯定会爱不释手。

TINA 是德州仪器 (TI) 专有的 DesignSoft 产品。该免费版本具有完整的功能,但不支持完整版 TINA 所提供的某些其他功能。

如需获取可用 TINA-TI 模型的完整列表,请参阅:SpiceRack - 完整列表 

需要 HSpice (...)

用户指南: PDF
下载英文版本 (Rev.A): PDF
参考设计

TIDA-010036 — 使用独立 ADC 的单相并联电表参考设计

此参考设计使用独立多通道模数转换器 (ADC) 对分流传感器进行采样,从而实现 0.5 级单相电能测量。结合分流传感器和紧凑型抗磁干扰电源,该设计可提供对磁篡改攻击的抵御能力。该设计还能够检测因中性线断开导致的潜在篡改问题。高性能 ARM Cortex-M4 MCU 计算计量值并结合 8kHz 采样率,可增加电能质量功能,例如独立谐波分析。
设计指南: PDF
原理图: PDF
参考设计

TIDA-010037 — 使用独立 ADC 的高精度分相 CT 电量计参考设计

此参考设计使用高性能、多通道模数转换器 (ADC) 实现 0.1 类分相电能计量。独立 ADC 对电流互感器 (CT) 在 8kHz 时的输出进行取样,测量主交流电源各分支的电流和电压。该参考设计在宽输入电流范围(0.05 – 100 安培)下能达到很高的精度,在必要时还支持高采样频率,以实现独立谐波分析等高级电能质量功能。与集成 SoC 和应用特定的专用产品相比,通过使用独立 ADC 对 CT 输出进行采样,可以让设计人员更加灵活地选择计量微控制器。此参考设计使用 SimpleLink™ ARM Cortex-M4 (...)
设计指南: PDF
原理图: PDF
封装 引脚数 下载
TSSOP (PW) 20 了解详情
WQFN (RUK) 20 了解详情

订购和质量

包含信息:
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 认证摘要
  • 持续可靠性监测

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持与培训

视频