ZHCSLH1A September   2021  – December 2021 LMH5485-SP

ADVANCE INFORMATION  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1  Absolute Maximum Ratings
    2. 7.2  ESD Ratings
    3. 7.3  Recommended Operating Conditions
    4. 7.4  Thermal Information
    5. 7.5  Electrical Characteristics: VS+ – VS– = 5 V
    6. 7.6  Electrical Characteristics: VS+ – VS– = 3 V
    7. 7.7  Quality Conformance Inspection
    8. 7.8  Typical Characteristics: 5 V Single Supply
    9. 7.9  Typical Characteristics: 3 V Single Supply
    10. 7.10 Typical Characteristics: 3 V to 5 V Supply Range
  8. Parameter Measurement Information
    1. 8.1 Example Characterization Circuits
  9. Detailed Description
    1. 9.1 Overview
      1. 9.1.1 Terminology and Application Assumptions
    2. 9.2 Functional Block Diagram
    3. 9.3 Feature Description
      1. 9.3.1 Differential I/O
      2. 9.3.2 Power-Down Control Pin (PD)
        1. 9.3.2.1 Operating the Power Shutdown Feature
      3. 9.3.3 Input Overdrive Operation
    4. 9.4 Device Functional Modes
      1. 9.4.1 Operation from Single-Ended Sources to Differential Outputs
        1. 9.4.1.1 AC-Coupled Signal Path Considerations for Single-Ended Input to Differential Output Conversion
        2. 9.4.1.2 DC-Coupled Input Signal Path Considerations for Single-Ended to Differential Conversion
        3. 9.4.1.3 Resistor Design Equations for the Single-Ended to Differential Configuration of the FDA
        4. 9.4.1.4 Input Impedance for the Single-Ended to Differential FDA Configuration
      2. 9.4.2 Differential-Input to Differential-Output Operation
        1. 9.4.2.1 AC-Coupled, Differential-Input to Differential-Output Design Issues
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
  12. 12Device and Documentation Support
    1. 12.1 Documentation Support
      1. 12.1.1 Related Documentation
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 支持资源
    4. 12.4 Trademarks
    5. 12.5 Electrostatic Discharge Caution
    6. 12.6 术语表
  13. 13Mechanical, Packaging, and Orderable Information
    1. 13.1 Tube Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • HKX|8
散热焊盘机械数据 (封装 | 引脚)
订购信息

特性

  • 已通过 QMLV(QML V 级)MIL-PRF-38535 认证,SMD 5962R1920401VXC
    • 辐射加固保障 (RHA) 能力高达 100krad (Si) 总电离剂量 (TID)
    • 单粒子闩锁 (SEL) 对于 LET 的
      抗扰度 = 85MeV-cm2/mg
    • 支持军用级温度范围:-55°C 至 125°C
  • 全差分放大器 (FDA) 架构
  • 带宽:490MHz (G = 2V/V)
  • 增益带宽积(GBWP):850MHz
  • 压摆率:1400V/µs
  • HD2、HD3:–79dBc、–97dBc(10MHz、2 VPP
  • 输入电压噪声:2.4nV/√Hz (f > 100kHz)
  • 输入失调电压、温漂:±100µV、±0.5µV/°C
  • 负轨输入 (NRI)、轨到轨输出 (RRO)
  • 输出共模控制
  • 电源:
    • 电源电压范围:2.7V 至 5.1V
    • 静态电流:10.1mA(5V 电源)
    • 断电能力:2µA(典型值)