SLAA380B December   2007  – September 2018 MSP430F2616 , MSP430F2617 , MSP430F2618 , MSP430F2619

 

  1.   Migrating From MSP430F16x MCUs to MSP430F261x MCUs
    1.     Trademarks
    2. 1 Comparison of MSP430F1xx and MSP430F2xx Families
    3. 2 Hardware Considerations for MSP430F16x to MSP430F261x Migration
      1. 2.1 Device Package and Pinout
      2. 2.2 Current Consumption
      3. 2.3 Operating Frequency and Supply Voltage
      4. 2.4 Device Errata
    4. 3 MSP430F16x to MSP430F261x Migration – Firmware Considerations
      1. 3.1 CPU and Memory Considerations
        1. 3.1.1 Extended Memory Architecture
        2. 3.1.2 Subroutine Parameter Passing and Stack Frame
        3. 3.1.3 MSP430X Instruction Cycle Count Optimizations
        4. 3.1.4 Device Memory Map
        5. 3.1.5 Information Flash Memory
      2. 3.2 Serial Communication – USART Versus USCI
        1. 3.2.1 UART Mode
        2. 3.2.2 SPI Mode
        3. 3.2.3 I2C Mode
      3. 3.3 Clock System
        1. 3.3.1 LFXT1 and XT2 Oscillators
        2. 3.3.2 Digitally Controlled Oscillator (DCO)
      4. 3.4 Bootloader
      5. 3.5 Interrupt Vectors
      6. 3.6 Beware of Reserved Bits!
      7. 3.7 Timers
      8. 3.8 Analog Comparator
    5. 4 References
  2.   Revision History

Migrating From MSP430F16x MCUs to MSP430F261x MCUs

This application report helps you migrate designs based on the MSP430F167, MSP430F168, MSP430F169, MSP430F1610, MSP430F1611, or MSP430F1612 microcontrollers (MCUs) to the MSP430F261x device family. This application report describes the main differences between the two device families and provides migration solutions for both software and hardware.