ZHCSB37C November   2012  – November 2014 RF430CL330H

PRODUCTION DATA.  

  1. 1器件概述
    1. 1.1 特性
    2. 1.2 应用
    3. 1.3 说明
    4. 1.4 典型应用图
  2. 2修订历史记录
  3. 3Terminal Configuration and Functions
  4. 4Specifications
    1. 4.1  Absolute Maximum Ratings
    2. 4.2  Handling Ratings
    3. 4.3  Recommended Operating Conditions
    4. 4.4  Recommended Operating Conditions, Resonant Circuit
    5. 4.5  Supply Currents
    6. 4.6  Digital Inputs
    7. 4.7  Digital Outputs
    8. 4.8  Thermal Characteristics
    9. 4.9  Serial Communication Protocol Timings
    10. 4.10 I2C Interface
    11. 4.11 SPI Interface
    12. 4.12 RF143B, Recommended Operating Conditions
    13. 4.13 RF143B, ISO14443B ASK Demodulator
    14. 4.14 RF143B, ISO14443B-Compliant Load Modulator
    15. 4.15 RF143B, Power Supply
  5. 5Detailed Description
    1. 5.1  Functional Block Diagram
    2. 5.2  Serial Communication Interface
    3. 5.3  SPI or I2C Mode Selection
    4. 5.4  Communication Protocol
    5. 5.5  I2C Protocol
      1. 5.5.1 BIP-8 Communication Mode With I2C
    6. 5.6  SPI Protocol
      1. 5.6.1 BIP-8 Communication Mode With SPI
    7. 5.7  Registers
      1. 5.7.1 General Control Register
      2. 5.7.2 Status Register
      3. 5.7.3 Interrupt Registers
      4. 5.7.4 CRC Registers
      5. 5.7.5 Communication Watchdog Register
      6. 5.7.6 Version Registers
    8. 5.8  NFC Type-4 Tag Functionality
      1. 5.8.1 ISO14443-3 Commands
      2. 5.8.2 NFC Tag Type 4 Commands
      3. 5.8.3 Data Rate Settings
    9. 5.9  NDEF Memory
      1. 5.9.1 NDEF Error Check
    10. 5.10 Typical Usage Scenario
    11. 5.11 References
  6. 6器件和文档支持
    1. 6.1 器件支持
      1. 6.1.1 开发支持
        1. 6.1.1.1 入门和下一步
      2. 6.1.2 器件和开发工具命名规则
    2. 6.2 文档支持
    3. 6.3 社区资源
    4. 6.4 商标
    5. 6.5 静电放电警告
    6. 6.6 术语表
  7. 7机械封装和可订购信息
    1. 7.1 封装信息

3 Terminal Configuration and Functions

Figure 3-1 shows the pin assignments for the PW package.

RF430CL330H pinout_pw14_slas850.gifFigure 3-1 14-Pin PW Package (Top View)

Figure 3-2 shows the pin assignments for the RGT package.

RF430CL330H pinout_rgt16_slas850.gifFigure 3-2 16-Pin RGT Package (Top View)

Table 3-1 Terminal Functions

TERMINAL I/O DESCRIPTION
NAME NO.
PW RGT
VCC 1 15 PWR

3.3-V power supply

ANT1 2 1 RF

Antenna input 1

ANT2 3 2 RF

Antenna input 2

RST 4 3 I

Reset input (active low)

E0 (TMS) 5 4 I

I2C address select 0

SPI mode select 0

(JTAG test mode select)

E1 (TDO) 6 5 I (O)

I2C address select 1

SPI mode select 1

(JTAG test data output)

E2 (TDI) 7 6 I

I2C address select 2

(JTAG test data in)

INTO (TCK) 8 7 O

Interrupt output

(JTAG test clock)

SCMS/

CS

9 8 I

Serial Communication Mode Select (during device initialization)

Chip select (in SPI mode)

SCK 10 9 I

SPI clock input (SPI mode)

SO/SCL 11 10 I/O

SPI slave out (SPI mode)

I2C clock (I2C mode)

SI/SDA 12 11 I/O

SPI slave in (SPI mode)

I2C data (I2C mode)

VCORE 13 12 PWR

Regulated core supply voltage

VSS 14 13 PWR

Ground supply

NC - 14, 16 Leave open, No connection
RF430CL330H app_dgm_i2c_slas850.gif

NOTE:

For recommended capacitance values, see Recommended Operating Conditions.
Figure 3-3 Example Application Diagram (I2C Operation) (PW Package Shown)
RF430CL330H app_dgm_spi_slas850.gif

NOTE:

For recommended capacitance values, see Recommended Operating Conditions.
Figure 3-4 Example Application Diagram (SPI Operation) (PW Package Shown)