The conducted emissions are tested to be compliant with the CISPR 25 Class 5 standards. The CISPR 25 Class 5 compliance was achieved without a common-mode choke. Figure 2-10 through Figure 2-17 show the waveforms of the EMI test results at 13.5-V input.

where

• Peak: Peak Detection Result
• AVG: Average Detection Result
• PK: CISPR 25 Class 5 Peak Limits
• AV: CISPR 25 Class 5 Average Limits

Figure 2-10 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 5 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Positive Line

Figure 2-11 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 5 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Negative Line

Figure 2-12 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 9 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Positive Line

Figure 2-13 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 9 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Negative Line

Figure 2-14 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 15 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Positive Line

Figure 2-15 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 15 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Negative Line

Figure 2-16 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 20 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Positive Line

Figure 2-17 EMI Performance, V_{PA_BUS} = V_{PB_BUS} = 20 V, I_{PA_BUS} = I_{PB_BUS} = 3 A, Negative Line

Table 2-2 shows the margin of each EMI test result.