ZHCSSL6B July   2023  – March 2024 TPS7H6003-SP , TPS7H6013-SP , TPS7H6023-SP

PRODMIX  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Device Comparison Table
  6. Device Options Table
  7. Pin Configuration and Functions
  8. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Switching Characteristics
    7. 7.7 Quality Conformance Inspection
    8. 7.8 Typical Characteristics
  9. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Input Voltage
      2. 8.3.2  Linear Regulator Operation
      3. 8.3.3  Bootstrap Operation
        1. 8.3.3.1 Bootstrap Charging
        2. 8.3.3.2 Bootstrap Capacitor
        3. 8.3.3.3 Bootstrap Diode
        4. 8.3.3.4 Bootstrap Resistor
      4. 8.3.4  High-Side Driver Startup
      5. 8.3.5  Inputs and Outputs
      6. 8.3.6  Dead Time
      7. 8.3.7  Input Interlock Protection
      8. 8.3.8  Undervoltage Lockout and Power Good (PGOOD)
      9. 8.3.9  Negative SW Voltage Transients
      10. 8.3.10 Level Shifter
    4. 8.4 Device Functional Modes
  10. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Bootstrap and Bypass Capacitors
        2. 9.2.2.2 Bootstrap Diode
        3. 9.2.2.3 BP5x Overshoot and Undershoot
        4. 9.2.2.4 Gate Resistor
        5. 9.2.2.5 Dead Time Resistor
        6. 9.2.2.6 Gate Driver Losses
      3. 9.2.3 Application Curves
    3. 9.3 Power Supply Recommendations
    4. 9.4 Layout
      1. 9.4.1 Layout Guidelines
      2. 9.4.2 Layout Examples
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 接收文档更新通知
    3. 10.3 支持资源
    4. 10.4 Trademarks
    5. 10.5 静电放电警告
    6. 10.6 术语表
  12. 11Revision History
  13. 12Mechanical, Packaging, and Orderable Information

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)
  • HBX|48
散热焊盘机械数据 (封装 | 引脚)
订购信息

Electrical Characteristics

Specifications are over ambient temperature operating range TA = –55°C to 125°C, VIN = 10 V to 14 V, VBP5L = VBP5H = 5 V, and no load on LOH, LOL, HOH, and HOL (unless otherwise noted).
PARAMETER TEST CONDITIONS SUBGROUP(1) MIN TYP MAX UNIT
SUPPLY CURRENTS
IQLS Low-side quiescent current 
VIN = 12 V, BOOT = 10 V

MODE = PWM, EN = 0 V 1, 2, 3 5 6.8 mA
MODE = IIM,
LI = HI = 0 V
1, 2, 3 5 8
IQHS High-side quiescent current 
VIN = 12 V, BOOT = 10 V

MODE = PWM, EN = 0 V 1, 2, 3 4 6.3 mA
MODE = IIM,
LI = HI = 0 V
1, 2, 3 4 6.3
IQBG BOOT to AGND quiescent current (TPS7H6003-SP) SW = 100 V, BOOT = 110 V 20 µA
IQBG BOOT to AGND quiescent current (TPS7H6013-SP) SW = 28 V, BOOT = 38 V 15 µA
IQBG BOOT to AGND quiescent current (TPS7H6023-SP) SW = 12 V, BOOT = 22 V 10 µA
IOP_BG BOOT to AGND operating current (TPS7H6003-SP) SW = 100 V, BOOT = 110 V 20 µA
IOP_BG BOOT to AGND operating current (TPS7H6013-SP) SW = 28 V, BOOT = 38 V 15 µA
IOP_BG BOOT to AGND operating current (TPS7H6023-SP) SW = 12 V, BOOT = 22 V 10 µA
IOP_LS Low-side operating current MODE = PWM, no load for LOL and LOH f = 500 kHz 1, 2, 3 6 9 mA
f = 1 MHz 1, 2, 3 8 11
f = 2 MHz 1, 2, 3 12 16
f = 5 MHz 1, 2, 3 20 30
MODE = IIM, no load for LOL and LOH f = 500 kHz 1, 2, 3 6 9
f = 1 MHz 1, 2, 3 8 12
f = 2 MHz 1, 2, 3 11 17
f = 5 MHz 1, 2, 3 20 30
IOP_HS High-side operating current MODE = PWM, no load for HOL and HOH f = 500 kHz 1, 2, 3 5 6.5 mA
f = 1 MHz 1, 2, 3 5.3 8
f = 2 MHz 1, 2, 3 7 10.5
f = 5 MHz 1, 2, 3 13 17.5
MODE = IIM, no load for HOL and HOH f = 500 kHz 1, 2, 3 4.5 6.5
f = 1 MHz 1, 2, 3 5.3 8
f = 2 MHz 1, 2, 3 7 10.5
f = 5 MHz 1, 2, 3 11.7 15
LOW-SIDE TO HIGH-SIDE CAPACITANCE
Low-side to high-side capacitance Low-side pins shorted together and high-side pins shorted together 6 pF
GATE DRIVER
VOL Low-level output voltage IOL = 100 mA 1, 2, 3 0.07 0.15 V
BP5x – VOH High-level output voltage IOH = 100 mA 1, 2, 3 0.13 0.3 V
IOH Peak source current HOH, LOH = 0 V, BP5x = 5 V 1, 2, 3 0.7 1.3 2.3 A
IOL Peak sink current HOL, LOL = 5 V, BP5x = 5 V 1, 2, 3 1.6 2.5 4.6 A
INTERNAL REGULATORS
VBP5L Low-side 5-V regulator output voltage CBP5L = 1 µF 1, 2, 3 4.75 5.0 5.175 V
Required BP5L output capacitor (2) 1, 2, 3 1 µF
VBP5H High-side 5-V regulator output voltage CBP5H = 1 µF 1, 2, 3 4.75 5.0 5.175 V
Required BP5H output capacitor (2) 1 µF
VBP7L 7-V regulator output voltage 1, 2, 3 6.65 7 7.35 V
Required BP7L output capacitor (2) 1 µF
UNDERVOLTAGE PROTECTION
BP5HR BP5H UVLO rising threshold CBP5H = 1 µF 1, 2, 3 4.0 4.25 4.5 V
BP5HF BP5H UVLO falling threshold  CBP5H = 1 µF 1, 2, 3 3.8 4.05 4.3
BP5HH BP5H UVLO hysteresis CBP5H = 1 µF 0.2
BP5LR BP5L UVLO rising threshold CBP5L = 1 µF 1, 2, 3 4.0 4.25 4.5 V
BP5LF BP5L UVLO falling threshold  CBP5L = 1 µF 1, 2, 3 3.8 4.05 4.3
BP5LH BP5L UVLO hysteresis CBP5L = 1 µF 0.2
BP7LR BP7L UVLO rising threshold CBP7L = 1 µF 1, 2, 3 6.2 6.5 6.8 V
BP7LF BP7L UVLO falling threshold  CBP7L = 1 µF 1, 2, 3 5.9 6.2 6.5
BP7LH BP7L UVLO hysteresis CBP7L = 1 µF 0.3
VINR VIN UVLO rising threshold 1, 2, 3 8.0 8.6 9.0 V
VINF VIN UVLO falling threshold 1, 2, 3 7.5 8.1 8.5
VINH VIN UVLO hysteresis 0.53
BOOTR BOOT UVLO rising threshold 1, 2, 3 6.6 7.1 7.4 V
BOOTF BOOT UVLO falling threshold 1, 2, 3 6.2 6.65 7
BOOTH BOOT UVLO hysteresis 0.45
INPUT PINS
VIR Input rising edge threshold 1, 2, 3 1.80 2.65 V
VIF Input falling edge threshold 1, 2, 3 1.15 1.85 V
VIHYS Input hysteresis 0.8 V
RPD Input pull-down resistance V = 2.15 V applied at input (EN_HI or PWM_LI) 1, 2, 3 100 400 kΩ
PROGRAMMBLE DEAD TIME
TDLH LO off to HO on dead time MODE = PWM, LO falling to HO rising (90% to 10%), f ≤ 2 MHz
RLH = 3.32 kΩ

9, 10 , 11 0 4.5 10 ns
RLH = 11.8 kΩ 9, 10 , 11 8 12 15.5
RLH = 21 kΩ 9, 10 , 11 15.5 21 24
RLH = 52.3 kΩ 9, 10 , 11 36 50 59
RLH = 105 kΩ 9, 10 , 11 74 97 113.5
TDHL HO off to LO on dead time MODE = PWM, HO falling to LO rising (90% to 10%), f ≤ 2 MHz RHL = 7.87 kΩ 9, 10 , 11 0 5 10 ns
RHL = 13.3 kΩ 9, 10 , 11 6 10.5 15
RHL = 23.7 kΩ 9, 10 , 11 16 21 24.5
RHL = 57.6 kΩ 9, 10 , 11 44 53 61
RHL = 113 kΩ 9, 10 , 11 86 105 125
BOOTSTRAP DIODE SWITCH
RBST_SW Bootstrap diode switch resistance IBST_SW = 100 mA 1, 2, 3 0.43
Bootstrap diode switch parallel resistance IBST_RP = 1 mA 1, 2, 3 0.8 1 1.2 kΩ
POWER GOOD
Logic-low output IFLT = 1 mA 1, 2, 3 0.4 V
PGOOD internal resistance BP5L = 5 V, BP7L = 7 V, VIN = 12 V 1, 2, 3 0.7 1 1.9 MΩ
Minimum BP5L voltage for valid PGOOD output 1, 2, 3 2 2.45 V
Subgroups are applicable for QML parts.  For subgroup definitions, see Quality Conformance Inspection.
Specified by design; not tested in production.