ZHCSQN0 December   2023 TPS4800-Q1

ADVANCE INFORMATION  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Pin Configuration and Functions
  6. Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 ESD Ratings
    3. 5.3 Recommended Operating Conditions
    4. 5.4 Thermal Information
    5. 5.5 Electrical Characteristics
    6. 5.6 Switching Characteristics
  7. Parameter Measurement Information
  8. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Charge Pump and Gate Driver Output (VS, PU, PD, BST, SRC)
      2. 7.3.2 Capacitive Load Driving Using FET Gate (PU, PD) Slew Rate Control
      3. 7.3.3 Short-Circuit Protection
        1. 7.3.3.1 Short-Circuit Protection With Auto-Retry
        2. 7.3.3.2 Short-Circuit Protection With Latch-Off
      4. 7.3.4 Overvoltage (OV) and Undervoltage Protection (UVLO)
      5. 7.3.5 Reverse Polarity Protection
      6. 7.3.6 Short-Circuit Protection Diagnosis (SCP_TEST)
      7. 7.3.7 TPS48000-Q1 as a Simple Gate Driver
    4. 7.4 Device Functional Modes
  9. Application and Implementation
    1. 8.1 Application Information
      1. 8.1.1 Application Limitations
        1. 8.1.1.1 Short-Circuit Protection Delay
        2. 8.1.1.2 Short-Circuit Protection Threshold
    2. 8.2 Typical Application: Driving Power at all Times (PAAT) Loads
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
  10. Device and Documentation Support
    1. 9.1 接收文档更新通知
    2. 9.2 支持资源
    3. 9.3 Trademarks
    4. 9.4 静电放电警告
    5. 9.5 术语表
  11. 10Revision History
  12. 11Mechanical, Packaging, and Orderable Information
    1. 11.1 Tape and Reel Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

说明

TPS48000-Q1 是一款具有保护和诊断功能的 100V 低 IQ 智能高侧驱动器。该器件具有 3.5V 至 80V 的宽工作电压范围,适用于 12V、24V 和 48V 系统设计。该器件可以承受低至 –65V 的负电源电压并保护负载免受这些电压的影响。

它具有强大的 (2A) 栅极驱动,可在大电流系统设计中使用并联 MOSFET 实现电源开关。

该器件提供可调节的短路保护功能。可以配置自动重试和锁存故障行为。使用 CS+ 和 CS- 引脚,可通过外部检测电阻或 MOSFET VDS 检测完成电流检测。可通过使用 CS_SEL 引脚输入实现高侧或低侧电流检测电阻配置。该器件还通过对 SCP_TEST 输入的外部控制来诊断内部短路比较器。

运行期间的低静态电流 43µA(典型值)可实现常开型系统设计。在 EN/UVLO 处于低电平时,静态电流降至 1.5μA(典型值)。

TPS48000-Q1 可采用 19 引脚 VSSOP 封装。

封装信息
器件型号封装(1)封装尺寸(2)
TPS48000-Q1VSSOP (19)5.1mm × 3.0mm
如需了解所有可用封装,请参阅数据表末尾的可订购产品附录。
封装尺寸(长 x 宽)为标称值,并包括引脚(如适用)。
GUID-20231114-SS0I-DT8T-WBXR-VBDJLMNLBRPC-low.svg图 3-1 适用于直流/直流的智能高侧驱动器
GUID-20231114-SS0I-QBHB-99GJ-M3PDZKHPH7QF-low.svg图 3-2 具有高侧 VDS 检测和低侧电流检测的配置