ZHCSA47E July   2012  – January 2018 TPS23751 , TPS23752

PRODUCTION DATA.  

  1. 特性
  2. 应用
  3. 说明
    1.     Device Images
      1. 3.1 典型应用电路
  4. 修订历史记录
  5. Pin Configuration and Functions
    1.     Pin Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 ESD Ratings: Surge
    4. 6.4 Recommended Operating Conditions
    5. 6.5 Thermal Information
    6. 6.6 Electric Characteristics - Controller Section
    7. 6.7 Electrical Characteristics - Sleep Mode (TPS23752 Only)
    8. 6.8 Electrical Characteristics - PoE Interface Section
    9. 6.9 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagrams
    3. 7.3 Feature Description
      1. 7.3.1 Pin Description
    4. 7.4 Device Functional Modes
      1. 7.4.1 PoE Overview
        1. 7.4.1.1 Threshold Voltages
        2. 7.4.1.2 PoE Startup Sequence
        3. 7.4.1.3 Detection
        4. 7.4.1.4 Hardware Classification
        5. 7.4.1.5 Inrush and Startup
        6. 7.4.1.6 Maintain Power Signature
        7. 7.4.1.7 Startup and Converter Operation
        8. 7.4.1.8 PD Hotswap Operation
      2. 7.4.2 Sleep Mode Operation (TPS23752 only)
        1. 7.4.2.1  Converter Controller Features
        2. 7.4.2.2  PWM and VFO Operation; CTL, SRT, and SRD Pin Relationships to Output Load Current
        3. 7.4.2.3  Bootstrap Topology
        4. 7.4.2.4  Current Slope Compensation and Current Limit
        5. 7.4.2.5  RT
        6. 7.4.2.6  T2P, Startup and Power Management
        7. 7.4.2.7  Thermal Shutdown
        8. 7.4.2.8  Adapter ORing
        9. 7.4.2.9  Using DEN to Disable PoE
        10. 7.4.2.10 ORing Challenges
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1  Input Bridges and Schottky Diodes
        2. 8.2.2.2  Protection, D1
        3. 8.2.2.3  Capacitor, C1
        4. 8.2.2.4  Detection Resistor, RDEN
        5. 8.2.2.5  Classification Resistor, RCLS
        6. 8.2.2.6  APD Pin Divider Network, RAPD1, RAPD2
        7. 8.2.2.7  Setting the PWM-VFO Threshold using the SRT pin
        8. 8.2.2.8  Setting Frequency (RT)
        9. 8.2.2.9  Current Slope Compensation
        10. 8.2.2.10 Voltage Feed-Forward Compensation
        11. 8.2.2.11 Estimating Bias Supply Requirements and Cvc
        12. 8.2.2.12 Switching Transformer Considerations and RVC
        13. 8.2.2.13 T2P Pin Interface
        14. 8.2.2.14 Softstart
        15. 8.2.2.15 Special Switching MOSFET Considerations
        16. 8.2.2.16 ESD
        17. 8.2.2.17 Thermal Considerations and OTSD
      3. 8.2.3 Application Curves
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11器件和文档支持
    1. 11.1 文档支持
      1. 11.1.1 相关文档
      2. 11.1.2 相关链接
    2. 11.2 社区资源
    3. 11.3 商标
    4. 11.4 静电放电警告
    5. 11.5 Glossary
  12. 12机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Pin Configuration and Functions

PWP Package
16-Pin TSSOP
Top View
TPS23751 TPS23752 P0047-02_SLVSB97.gif
PWP Package
20-Pin TSSOP
Top View
TPS23751 TPS23752 P0021-04_SLVSB97.gif

Pin Functions

NAME PIN I/O DESCRIPTION
TPS23751 TPS23752
VDD 1 1 I Connect to positive PoE input power rail. Bypass with 0.1 µF to VSS.
DEN 2 2 I/O Connect 24.9 kΩ to VDD for detection. Pull to VSS to disable pass MOSFET.
CLS 3 3 I/O Connect resistor from CLS to VSS to program classification current.
APD 4 4 I Raise 1.5 V above ARTN to disable pass MOSFET and force T2P active.
RT 5 5 I Connect a resistor from RT to ARTN to set switching frequency.
T2P 6 6 O Active low indicates type-2 PSE connected or APD active.
SRD 7 7 O Disable external synchronous rectifiers in VFO Mode.
CTL 8 8 I Control loop input to PWM
LED 9 O Open-drain drive for external LED controlled by SLPb, MODE, and WAKE.
WAKE 10 I/O Pull WAKE low to re-enable the DC-DC converter from Sleep Mode.
SLPb 11 I Pull low during normal operation to enter Sleep Mode.
MODE 12 I Enables pulsed MPS when entering Sleep Mode. Control LED in normal operation.
SRT 9 13 I Set the threshold of PWM to VFO transition
VB 10 14 O 5 V bias supply. Bypass with a minimum of 0.1 µF to ARTN.
CS 11 15 I/O Current sense input. Connect to ARTN-referenced current sense resistor.
VC 12 16 I/O DC-DC converter bias voltage. Bypass with 0.47 µF or more to ARTN directly at pin.
GATE 13 17 O Gate driver output for DC-DC converter switching MOSFET.
ARTN 14 18 PWR DC-DC converter analog return. Connect to RTN.
RTN 15 19 O Drain of PoE pass MOSFET. Connect to ARTN.
VSS 16 20 PWR Connect to negative power rail derived from PoE source.
Pad Always connect PowerPAD™ to VSS. A large fill area is required to assist in heat dissipation.