ZHCSUD7B May   1998  – May 2024 OPA130 , OPA2130 , OPA4130

PRODUCTION DATA  

  1.   1
  2. 1特性
  3. 2应用
  4. 3说明
  5. 4Pin Configuration and Functions
  6. 5Specifications
    1. 5.1 Absolute Maximum Ratings
    2. 5.2 Recommended Operating Conditions
    3. 5.3 Thermal Information - OPA130
    4. 5.4 Thermal Information - OPA2130
    5. 5.5 Thermal Information - OPA4130
    6. 5.6 Electrical Characteristics
    7. 5.7 Typical Characteristics
  7. 6Application and Implementation
    1. 6.1 Application Information
      1. 6.1.1 Operating Voltage
      2. 6.1.2 Offset Voltage Trim
      3. 6.1.3 Input Bias Current
    2. 6.2 Typical Application
  8. 7Device and Documentation Support
    1. 7.1 接收文档更新通知
    2. 7.2 支持资源
    3. 7.3 Trademarks
    4. 7.4 静电放电警告
    5. 7.5 术语表
  9. 8Revision History
  10. 9Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

5.6 Electrical Characteristics

at TA = 25°C, VS = ±15V, RL = 10kΩ connected to midsupply, and VCM = VOUT = midsupply (unless otherwise noted)
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
OFFSET VOLTAGE
VOS Input offset voltage    ±0.2 ±1 mV
dVOS/dT Input offset voltage drift TA = –40°C to +85°C ±2 ±10 μV/°C
PSRR Power-supply rejection ratio VS = ±2.25V to ±18V ±2 ±20 μV/V
INPUT BIAS CURRENT
IB Input bias current(1) ±5 ±20 pA
TA = –40°C to +85°C See Typical Characteristics
IOS Input offset current(1) ±2 ±20 pA
NOISE
en Input voltage noise density f = 10Hz 30 nV/√Hz
f = 100Hz 18
f = 1kHz 16
f = 10kHz 16
In Input current noise density f = 1kHz 4 fA/√Hz
INPUT VOLTAGE
VCM Common-mode voltage (V–) + 2 (V+) – 3.5 V
CMRR Common-mode rejection ratio –13V ≤ VCM ≤ 11.5V  90 105 dB
INPUT IMPEDANCE
Differential   1013 || 5 Ω || pF
Common-mode –13V ≤ VCM ≤ 11.5V 1013 || 4.3
OPEN-LOOP GAIN
AOL Open-loop voltage gain  –13.8V ≤ VO ≤ 13V, RL = 10kΩ 114 123 dB
–13V ≤ VO ≤ 12V, RL = 2kΩ 104 110
FREQUENCY RESPONSE
GBW Gain bandwidth product 1 MHz
SR Slew rate 2 V/μs
Settling time  10V step, G = 1 0.1% 5.5 μs
0.01% 7
THD+N Total harmonic distortion plus noise f = 1kHz, G = 1, VO = 3.5Vrms 0.0003%
Overload recovery time G = 1, VIN = ±15V  2 μs
OUTPUT
VO Voltage output  RL = 10kΩ Positive (V+) – 2 (V+) – 1.5 V
Negative (V–) + 1 (V–) + 1.2
RL = 2kΩ Positive (V+) – 3 (V+) – 2.5
Negative (V–) + 1.5 (V–) + 2
ISC Short-circuit current ±18 mA
CLOAD Capacitive load drive Stable operation  See Typical Characteristics
POWER SUPPLY
IQ Quiescent current (per amplifier) IO = 0mA  ±530 ±650 µA
(1) High-speed test at TJ = 25°C.