SNIS146B March   2007  – October 2017 LM95214

PRODUCTION DATA.  

  1. Features
  2. Applications
  3. Description
  4. Revision History
  5. Pin Configuration and Functions
  6. Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics: Temperature-to-Digital Converter
    6. 6.6 Logic Electrical Characteristics: Digital DC Characteristics
    7. 6.7 Switching Characteristics: SMBus Digital
    8. 6.8 Typical Characteristics
  7. Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Conversion Sequence
      2. 7.3.2 Power-On-Default States
      3. 7.3.3 SMBus Interface
      4. 7.3.4 Temperature Conversion Sequence
        1. 7.3.4.1 Digital Filter
      5. 7.3.5 Fault Queue
      6. 7.3.6 Temperature Data Format
      7. 7.3.7 SMBDAT Open-Drain Output
      8. 7.3.8 TCRIT1, TCRIT2, and TCRIT3 Outputs
      9. 7.3.9 TCRIT Limits and TCRIT Outputs
    4. 7.4 Device Functional Modes
      1. 7.4.1 Diode Fault Detection
      2. 7.4.2 Communicating With the LM95214
      3. 7.4.3 Serial Interface Reset
      4. 7.4.4 One-Shot Conversion
    5. 7.5 Register Maps
      1. 7.5.1 LM95214 Registers
        1. 7.5.1.1 Value Registers
          1. 7.5.1.1.1 Local Value Registers
          2. 7.5.1.1.2 Remote Temperature Value Registers With Signed Format
          3. 7.5.1.1.3 Remote Temperature Value Registers With Unsigned Format
        2. 7.5.1.2 Diode Configuration Register
          1. 7.5.1.2.1 Remote 1-4 Offset
        3. 7.5.1.3 Configuration Registers
          1. 7.5.1.3.1 Main Configuration Register
          2. 7.5.1.3.2 Conversion Rate Register
          3. 7.5.1.3.3 Channel Conversion Enable
          4. 7.5.1.3.4 Filter Setting
          5. 7.5.1.3.5 1-Shot
        4. 7.5.1.4 Status Registers
          1. 7.5.1.4.1 Common Status Register
          2. 7.5.1.4.2 Status 1 Register (Diode Fault)
          3. 7.5.1.4.3 Status 2 (TCRIT1)
          4. 7.5.1.4.4 Status 3 (TCRIT2)
          5. 7.5.1.4.5 Status 4 (TCRIT3)
        5. 7.5.1.5 Mask Registers
          1. 7.5.1.5.1 TCRIT1 Mask Register
          2. 7.5.1.5.2 TCRIT2 Mask Registers
          3. 7.5.1.5.3 TCRIT3 Mask Register
        6. 7.5.1.6 Limit Registers
          1. 7.5.1.6.1 Local Limit Register
          2. 7.5.1.6.2 Remote Limit Registers
          3. 7.5.1.6.3 Common Tcrit Hysteresis Register
        7. 7.5.1.7 Identification Registers
  8. Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
    3. 8.3 Diode Non-Ideality
      1. 8.3.1 Diode Non-Ideality Factor Effect on Accuracy
      2. 8.3.2 Calculating Total System Accuracy
      3. 8.3.3 Compensating for Different Non-Ideality
  9. Power Supply Recommendations
  10. 10Layout
    1. 10.1 Layout Guidelines
    2. 10.2 Layout Example
  11. 11Device and Documentation Support
    1. 11.1 Receiving Notification of Documentation Updates
    2. 11.2 Community Resources
    3. 11.3 Trademarks
    4. 11.4 Electrostatic Discharge Caution
    5. 11.5 Glossary
  12. 12Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Features

  • Accurately Senses Die Temperature of 4 Remote ICs or Diode Junctions and Local Temperature
  • Local Temperature Accuracy ±2.0°C (Maximum)
  • Remote Diode Temperature Accuracy ±1.1°C (Maximum)
  • Supply Voltage: 3 V to 3.6 V
  • Average Supply Current (1-Hz Conversion Rate) 0.57 mA (Typical)
  • Programmable Digital Filters and Analog Front-End Filter
  • 0.125°C LSB Temperature Resolution
  • 0.03125°C LSB Remote Temperature Resolution With Digital Filter Enabled
  • Signed Format: +127.875°C/–128°C Remote Range
  • Unsigned Format: 0°C/255°C Remote Range
  • Remote Diode Fault Detection, Model Selection, and Offset Correction
  • Mask and Status Register Support
  • 3 Programmable TCRIT Outputs With Programmable Shared Hysteresis and Fault-Queue
  • Programmable Conversion Rate and Shutdown Mode One-Shot Conversion Control
  • SMBus 2.0 Compatible Interface, Supports TIMEOUT
  • Three-Level Address Pin

Applications

  • MCU, GPU, ASIC, FPGA, DSP, and CPU Temperature Monitoring
  • Telecommunication Equipment
  • Servers and Personal Computers
  • Cloud Ethernet Switches
  • Secure Data Centers
  • Highly Integrated Medical Systems
  • Precision Instruments and Test Equipment
  • LED Lighting Thermal Control
  • Office Electronics
  • Electronic Test Equipment
  • Processor and Computer System Thermal Management

Description

The LM95214 device is an 11-bit digital temperature sensor with a 2-wire System Management Bus (SMBus) interface that can very accurately monitor the temperature of four remote diodes as well as its own temperature. The four remote diodes can be external devices such as microprocessors, graphics processors that target the ideality of a 2N3904 transistor or diode-connected 2N3904s.

The LM95214 reports temperature in two different formats for +127.875°C/–128°C range and 0°C/255°C range. The LM95214 TCRIT1, TCRIT2 and TCRIT3 outputs are triggered when any unmasked channel exceeds its corresponding programmable limit and can be used to shutdown the system, to turn on the system fans or as a microcontroller interrupt function. The current status of the TCRIT1, TCRIT2, and TCRIT3 pins can be read back from the status registers. Mask registers are available for further control of the TCRIT outputs.

Two LM95214 remote temperature channels have programmable digital filters while the other two remote channels use a fault-queue to minimize unwanted TCRIT events when temperature spikes are encountered.

For optimum flexibility and accuracy, each LM95214 channel includes registers for offset correction. A three-level address pin allows connection of up to 3 LM95214s to the same SMBus master. The LM95214 includes power saving functions such as: programmable conversion rate, shutdown mode, and disabling of unused channels.

Device Information(1)

PART NUMBER PACKAGE BODY SIZE (NOM)
LM95214 WSON (14) 4.00 mm × 4.00 mm
  1. For all available packages, see the orderable addendum at the end of the data sheet.

Remote 1 Temperature Error, TA=TD

LM95214 D003_SNIS146_RT1TempErr.gif

Revision History

Changes from A Revision (March 2013) to B Revision

  • Added Device Information table, Added ESD Ratings table, Feature Description section, Device Functional Modes section, Application and Implementation section, Specification section, Detailed Description section, Layout section, Device and Documentation Support section, and Mechanical, Packaging, and Orderable Information section.Go

Changes from * Revision (March 2013) to A Revision

  • Changed layout of National Data Sheet to TI formatGo