ZHCSN09A June   2021  – September 2022 LM5168-Q1 , LM5169-Q1

PRODUCTION DATA  

  1. 特性
  2. 应用
  3. 说明
  4. Revision History
  5. Device Comparison Table
  6. Pin Configuration and Functions
  7. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  8. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1  Control Architecture
      2. 8.3.2  Internal VCC Regulator and Bootstrap Capacitor
      3. 8.3.3  Internal Soft Start
      4. 8.3.4  On-Time Generator
      5. 8.3.5  Current Limit
      6. 8.3.6  N-Channel Buck Switch and Driver
      7. 8.3.7  Synchronous Rectifier
      8. 8.3.8  Enable, Undervoltage Lockout (EN/UVLO)
      9. 8.3.9  Power Good (PGOOD)
      10. 8.3.10 Thermal Protection
    4. 8.4 Device Functional Modes
      1. 8.4.1 Shutdown Mode
      2. 8.4.2 Active Mode
      3. 8.4.3 Sleep Mode
  9. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Fly-Buck™ Converter Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1  Switching Frequency (RT)
        2. 9.2.2.2  Transformer Selection
        3. 9.2.2.3  Output Capacitor Selection
        4. 9.2.2.4  Secondary Output Diode
        5. 9.2.2.5  Setting Output Voltage
        6. 9.2.2.6  Input Capacitor
        7. 9.2.2.7  Type-3 Ripple Network
        8. 9.2.2.8  CBST Selection
        9. 9.2.2.9  Minimum Secondary Output Load
        10. 9.2.2.10 Example Design Summary
      3. 9.2.3 Application Curves
    3. 9.3 Typical Buck Application
      1. 9.3.1 Design Requirements
      2. 9.3.2 Detailed Design Procedure
        1. 9.3.2.1 Switching Frequency (RT)
        2. 9.3.2.2 Buck Inductor Selection
        3. 9.3.2.3 Setting the Output Voltage
        4. 9.3.2.4 Type-3 Ripple Network
        5. 9.3.2.5 Output Capacitor Selection
        6. 9.3.2.6 Input Capacitor Considerations
        7. 9.3.2.7 CBST Selection
        8. 9.3.2.8 Example Design Summary
      3. 9.3.3 Application Curves
    4. 9.4 Power Supply Recommendations
    5. 9.5 Layout
      1. 9.5.1 Thermal Considerations
      2. 9.5.2 Typical EMI Results
      3. 9.5.3 Layout Guidelines
        1. 9.5.3.1 Compact PCB Layout for EMI Reduction
        2. 9.5.3.2 Feedback Resistors
      4. 9.5.4 Layout Example
  10. 10Device and Documentation Support
    1. 10.1 Device Support
      1. 10.1.1 第三方产品免责声明
    2. 10.2 Documentation Support
      1. 10.2.1 Related Documentation
    3. 10.3 接收文档更新通知
    4. 10.4 支持资源
    5. 10.5 Trademarks
    6. 10.6 Electrostatic Discharge Caution
    7. 10.7 术语表
  11. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Application Curves

The curves in this section were taken using the LM5169P-Q1. Unless otherwise specified the following conditions apply: TA = 25°C.

VOUT = 5 V FSW = 500 kHz
Figure 9-15 Efficiency: VOUT = 5 V
VOUT = 24 V  FSW = 500 kHz
Figure 9-17 Efficiency: VOUT = 24 V
VOUT = 12 V FSW = 500 kHz
Figure 9-19 Line and Load Regulation: VOUT = 12 V
VIN = 48 V IOUT = 0 A to 0.6 A
TR = TF = 1 μs
Figure 9-21 Load Transient: VOUT = 5 V
VIN = 48 V IOUT = 0 A to 0.5 A
TR = TF = 1 μs
Figure 9-23 Load Transient: VOUT = 12 V
VIN = 36 V IOUT = 0 A to 0.6 A
TR = TF = 1 μs
Figure 9-25 Load Transient: VOUT = 24 V
VIN = 48 V VOUT = 5 V
IOUT = 600 mA FSW = 500 kHz
Figure 9-27 Typical Switching Waveforms
VIN = 48 V VOUT = 5 V
IOUT = 600 mA
Figure 9-29 Typical Start-up Waveforms
IOUT = 600 mA VOUT = 5 V
Figure 9-31 Drop-Out Response
VOUT = 12 V  FSW = 500 kHz
Figure 9-16 Efficiency: VOUT = 12 V
VOUT = 5 V FSW = 500 kHz
Figure 9-18 Line and Load Regulation: VOUT = 5 V
VOUT = 24 V FSW = 500 kHz
Figure 9-20 Line and Load Regulation: VOUT = 24 V
VIN = 48 V IOUT = 0.1 A to 0.6 A
TR = TF = 1 μs
Figure 9-22 Load Transient: VOUT = 5 V
VIN = 48 V IOUT = 0.1 A to 0.5 A
TR = TF = 1 μs
Figure 9-24 Load Transient: VOUT = 12 V
VIN = 36 V IOUT = 0.1 A to 0.6 A
TR = TF = 1 μs
Figure 9-26 Load Transient: VOUT = 24 V
VIN = 48 V VOUT = 5 V
IOUT = 10 mA
Figure 9-28 Typical Switching Waveforms
IOUT = 0 A LM5169P
Figure 9-30 No-Load Input Supply Current
IOUT = 300 mA
Figure 9-32 Drop-Out Response
Table 9-4 BOM for Application Curves
VOUT RA RFBB RFBT CA CB COUT L
5 V 121 kΩ 143 kΩ 453 kΩ 3300 pF 56 pF 2x 22 μF 68 μH, 0.17 Ω
12 V 182 kΩ 49.9 kΩ 453 kΩ 3300 pF 56 pF 2x 22 μF 68 μH, 0.17 Ω
24 V 243 kΩ 23.7 kΩ 453 kΩ 3300 pF 56 pF 2x 22 μF 68 μH, 0.17 Ω