ZHCSRV7B december   1995  – may 2023 INA2128

PRODUCTION DATA  

  1.   1
  2. 1特性
  3. 2应用
  4. 3说明
  5. 4Revision History
  6. 5Pin Configuration and Functions
  7. 6Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 Electrical Characteristics
    6. 6.6 Typical Characteristics
  8. 7Application and Implementation
    1. 7.1 Application Information
    2. 7.2 Typical Application
      1. 7.2.1 Setting The Gain
      2. 7.2.2 Dynamic Performance
      3. 7.2.3 Noise Performance
      4. 7.2.4 Offset Trimming
      5. 7.2.5 Input Bias Current Return Path
      6. 7.2.6 Input Common-Mode Range
      7. 7.2.7 Low-Voltage Operation
      8. 7.2.8 Input Protection
      9. 7.2.9 Channel Crosstalk
  9. 8Device and Documentation Support
    1. 8.1 接收文档更新通知
    2. 8.2 支持资源
    3. 8.3 Trademarks
    4. 8.4 静电放电警告
    5. 8.5 术语表
  10. 9Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Setting The Gain

Gain of the INA2128 is set by connecting a single external resistor, RG, connected as shown:

Equation 1. GUID-20211028-SS0I-3ZDN-XZZP-NBF44HZMCK0B-low.png

Commonly-used gains and resistor values are shown in Figure 7-1.

The 50 kΩ term in Equation 1 comes from the sum of the two internal feedback resistors, A1 and A2. These on-chip metal film resistors are laser-trimmed to accurate absolute values. The accuracy and temperature coefficient of these resistors are included in the gain accuracy and drift specifications of the INA2128.

The stability and temperature drift of the external gain setting resistor, RG, also affects gain. RG’s contribution to gain accuracy and drift can be directly inferred from the gain equation (1). Low resistor values required for high gain can make wiring resistance important. Sockets add to the wiring resistance which will contribute additional gain error in gains of approximately 100 or greater.