ZHCSEZ6D April   2016  – January 2019

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
    1.     Device Images
      1.      简化原理图
  4. 4 修订历史记录
  5. 5 Device Comparison
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Requirements
    7. 7.7 Typical Operational Characteristics (Protection Circuits Waveforms)
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Power-Down or Undervoltage Lockout (UVLO)
      2. 8.3.2 Power-up
      3. 8.3.3 Sleep Mode
      4. 8.3.4 New Charge Cycle
      5. 8.3.5 Overvoltage-Protection (OVP) – Continuously Monitored
      6. 8.3.6 CHG Terminal Indication
    4. 8.4 Device Functional Modes
      1. 8.4.1  CHG LED Pull-up Source
      2. 8.4.2  IN-DPM (VIN-DPM or IN-DPM)
      3. 8.4.3  OUT
      4. 8.4.4  ISET
      5. 8.4.5  TS
      6. 8.4.6  Termination and Timer Disable Mode (TTDM) - TS Terminal High
      7. 8.4.7  Timers
      8. 8.4.8  Termination
      9. 8.4.9  Battery Detect Routine
      10. 8.4.10 Refresh Threshold
      11. 8.4.11 Starting a Charge on a Full Battery
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
        1. 9.2.2.1 Calculations
          1. 9.2.2.1.1 Program the Fast Charge Current, ISET:
          2. 9.2.2.1.2 Pre-Charge and Termination Current Thresholds, ITERM, and PRE-CHG
          3. 9.2.2.1.3 TS Function
          4. 9.2.2.1.4 CHG
        2. 9.2.2.2 Selecting In and Out Terminal Capacitors
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
    3. 11.3 Thermal Considerations
      1. 11.3.1 Leakage Current Effects on Battery Capacity
  12. 12器件和文档支持
    1. 12.1 接收文档更新通知
    2. 12.2 社区资源
    3. 12.3 商标
    4. 12.4 静电放电警告
    5. 12.5 术语表
  13. 13机械、封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

7.6 Timing Requirements

MIN NOM MAX UNIT
INPUT
tDGL(OVP_SET) Input over-voltage blanking time VIN: 5 V to 12 V 113 µs
tDGL(OVP_REC) Deglitch time exiting OVP Time measured from VIN: 12V to 5V 30 µs
ISET SHORT CIRCUIT TEST
tDGL_SHORT Deglitch time transition from ISET short to IOUT disable Clear fault by disconnecting IN or cycling (high / low) TS 1 ms
PRECHARGE – SET INTERNALLY
tDGL1(LOWV) Deglitch time on pre-charge to fast-charge transition 70 µs
tDGL2(LOWV) Deglitch time on fast-charge to pre-charge transition 32 ms
TERMINATION
tDGL(TERM) Deglitch time, termination detected 29 ms
RECHARGE OR REFRESH
tDGL1(RCHG) Deglitch time, recharge threshold detected VIN = 5 V, VTS = 0.5 V, VOUT: 4.25 V to 3.5 V in 1 µs; tDGL(RCHG) is time to ISET ramp 29 ms
BATTERY DETECT ROUTINE
tDGL(HI/LOW REG) Regulation time at VREG or VREG-BD 25 ms
BATTERY-PACK NTC MONITOR; TS TERMINAL
tDGL(TS) Deglitch for TS thresholds: 0/45C. Battery charging 30 ms