ZHCSBO2H December   2012  – July 2014 AFE4400

PRODUCTION DATA.  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 修订历史记录
  5. 5 Device Family Options
  6. 6 Pin Configuration and Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 Handling Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Requirements
    7. 7.7 Timing Requirements: Supply Ramp and Power-Down
    8. 7.8 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Receiver Channel
        1. 8.3.1.1 Receiver Front-End
        2. 8.3.1.2 Ambient Cancellation Scheme and Second Stage Gain Block
        3. 8.3.1.3 Receiver Control Signals
        4. 8.3.1.4 Receiver Timing
      2. 8.3.2 Clocking and Timing Signal Generation
      3. 8.3.3 Timer Module
        1. 8.3.3.1 Using the Timer Module
      4. 8.3.4 Receiver Subsystem Power Path
      5. 8.3.5 Transmit Section
        1. 8.3.5.1 Transmitter Power Path
        2. 8.3.5.2 LED Power Reduction During Periods of Inactivity
    4. 8.4 Device Functional Modes
      1. 8.4.1 ADC Operation and Averaging Module
        1. 8.4.1.1 Operation
      2. 8.4.2 Diagnostics
        1. 8.4.2.1 Photodiode-Side Fault Detection
        2. 8.4.2.2 Transmitter-Side Fault Detection
        3. 8.4.2.3 Diagnostics Module
    5. 8.5 Programming
      1. 8.5.1 Serial Programming Interface
      2. 8.5.2 Reading and Writing Data
        1. 8.5.2.1 Writing Data
        2. 8.5.2.2 Reading Data
        3. 8.5.2.3 Multiple Data Reads and Writes
        4. 8.5.2.4 Register Initialization
        5. 8.5.2.5 AFE SPI Interface Design Considerations
    6. 8.6 Register Maps
      1. 8.6.1 AFE Register Map
      2. 8.6.2 AFE Register Description
  9. 9 Applications and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curve
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Example
  12. 12器件和文档支持
    1. 12.1 Trademarks
    2. 12.2 Electrostatic Discharge Caution
    3. 12.3 术语表
  13. 13机械封装和可订购信息

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

6 Pin Configuration and Functions

RHA Package
VQFN-40
(Top View)
po_bas601.gif
1. DNC = Do not connect.

Pin Functions

PIN FUNCTION DESCRIPTION
NAME NO.
ADC_RDY 28 Digital Output signal that indicates ADC conversion completion.
Can be connected to the interrupt input pin of an external microcontroller.
AFE_PDN 20 Digital AFE-only power-down input; active low.
Can be connected to the port pin of an external microcontroller.
BG 7 Reference Decoupling capacitor for internal band-gap voltage to ground.
(2.2-µF decoupling capacitor to ground)
CLKOUT 30 Digital Buffered 4-MHz output clock output.
Can be connected to the clock input pin of an external microcontroller.
DIAG_END 21 Digital Output signal that indicates completion of diagnostics.
Can be connected to the port pin of an external microcontroller.
DNC(1) 5, 6, 10, 34, 35 — Do not connect these pins. Leave as open circuit.
INN 1 Analog Receiver input pin. Connect to photodiode anode.
INP 2 Analog Receiver input pin. Connect to photodiode cathode.
LED_DRV_GND 12, 13, 16 Supply LED driver ground pin, H-bridge. Connect to common board ground.
LED_DRV_SUP 17, 18 Supply LED driver supply pin, H-bridge. Connect to an external power supply capable of supplying the large LED current, which is drawn by this supply pin.
LED_ALM 22 Digital Output signal that indicates an LED cable fault.
Can be connected to the port pin of an external microcontroller.
PD_ALM 23 Digital Output signal that indicates a PD sensor or cable fault.
Can be connected to the port pin of an external microcontroller.
RESET 29 Digital AFE-only reset input, active low.
Can be connected to the port pin of an external microcontroller.
RX_ANA_GND 3, 36, 40 Supply Rx analog ground pin. Connect to common board ground.
RX_ANA_SUP 33, 39 Supply Rx analog supply pin; 0.1-µF decoupling capacitor to ground
RX_DIG_GND 19, 32 Supply Rx digital ground pin. Connect to common board ground.
RX_DIG_SUP 31 Supply Rx digital supply pin; 0.1-µF decoupling capacitor to ground
SCLK 24 SPI SPI clock pin
SPISIMO 26 SPI SPI serial in master out
SPISOMI 25 SPI SPI serial out master in
SPISTE 27 SPI SPI serial interface enable
TX_CTRL_SUP 11 Supply Transmit control supply pin (0.1-µF decoupling capacitor to ground)
TX_REF 9 Reference Transmitter reference voltage, 0.75 V default after reset.
Connect a 2.2-μF decoupling capacitor to ground.
TXN 14 Analog LED driver out B, H-bridge output. Connect to LED.
TXP 15 Analog LED driver out B, H-bridge output. Connect to LED.
VCM 4 Reference Input common-mode voltage output.
Connect a series resistor (1 kΩ) and a decoupling capacitor (10 nF) to ground.
The voltage across the capacitor can be used to shield (guard) the INP, INN traces.
VSS 8 Supply Substrate ground. Connect to common board ground.
XOUT 37 Digital Crystal oscillator pins.
Connect an external 8-MHz crystal between these pins with the correct load capacitor
(as specified by vendor) to ground.
XIN 38 Digital Crystal oscillator pins.
Connect an external 8-MHz crystal between these pins with the correct load capacitor
(as specified by vendor) to ground.
(1) Leave pins as open circuit. Do not connect.