TAC5211
- ADC channel
- Mono high performance ADC
- Performance:
- Line differential input dynamic range: 118 dB
- Mic differential input dynamic range: 118 dB
- THD+N: –95 dB
- Input voltage:
- Differential, 2-VRMS full-scale inputs
- Single-ended, 1-VRMS full-scale inputs
- Input mix / mux options
- Sample rate (fS) = 8 kHz to 768 kHz
- Programmable microphone bias (Up to 3V)
- DAC channel
- Mono high performance DAC
- DAC performance:
- DAC to line out dynamic range: 119 dB
- DAC to HP out dynamic range: 115 dB
- THD+N: –95 dB
- Head phone / line Out output voltage:
- Differential, 2-VRMS full-scale
- Single-ended, 1-VRMS full-scale
- DAC sample Rates (fs) = 8 KHz to 768 KHz
- Common features
- Up to 4 record channels
- 1 Channel analog + 3 channel digital
- 4 Channel digital
- Analog input to output by-pass
- Voice activity detection
- Battery protection
- Signal distortion limiter
- Thermal foldback
- Low latency filter selection
- Programmable HPF and biquad filters
- I2C & SPI control interface
- Audio serial interface
- Format: TDM, I2S or left justified
- Word length: 16,20,24 or 32 bits
- Programmable PLL for flexible clocking
- Low power modes
- TBD mW for playback
- TBD mW for record
- Single supply operation: 1.8 V or 3.3 V
- I/O supply operation: 1.2 V or 1.8 V or 3.3 V
- Temperature grade 1: –40°C ≤ TA ≤ +125°C
- Up to 4 record channels
The TAC5211 is a high performance Mono Codec with 2 VRMS differential Input, 118 dB Mono ADC and 2 VRMS Mono DAC. The TAC5211 supports both differential and Single-ended input and output. The device supports both Microphone and Line In input on the ADC Channel. DAC Output can be configured for either Line Out or Head Phone Load. TAC5211 can drive up to 62.5 mW into a Headphone Load. The TAC5211 integrates programable channel gain, digital volume control, a low-jitter phase-locked loop (PLL), a programmable high-pass filter (HPF), programmable EQ and biquad filters, low-latency filter modes, and allows for sample rates up to 768 kHz. The TAC5211 supports time-division multiplexing (TDM), I2S, or left-justified (LJ) audio formats, and can be controlled with I2C or SPI. These integrated high-performance features, along with a single supply operation, makes TAC5211 an excellent choice for space-constrained audio applications.
技术文档
类型 | 标题 | 下载最新的英语版本 | 日期 | |||
---|---|---|---|---|---|---|
* | 数据表 | TAC5211 High-performance mono audio codec with 118 dB dynamic range ADC and 119 dB dynamic range DAC 数据表 | PDF | HTML | 2022年 1月 12日 | ||
应用手册 | TAx5x1x 同步采样速率转换 | PDF | HTML | 英语版 | PDF | HTML | 2024年 2月 9日 | |
应用手册 | TAx5x1x 系列支持的时钟错误配置、检测和模式 | PDF | HTML | 英语版 | PDF | HTML | 2024年 1月 11日 | |
应用手册 | 交流耦合和直流耦合 DAC 中的输出摆幅和共模设置 | PDF | HTML | 英语版 | PDF | HTML | 2024年 1月 11日 | |
应用手册 | 器件的时钟配置和 TAx5x1x 系列的灵活时钟 | PDF | HTML | 英语版 | PDF | HTML | 2024年 1月 9日 | |
应用手册 | TAx5x1x 器件的模拟输入配置、混合和多路复用 | PDF | HTML | 英语版 | 2024年 1月 8日 | ||
应用手册 | Analog Input Configurations, Mixing and Muxing of TAx5x1x Devices (Rev. A) | PDF | HTML | 2023年 10月 30日 |
设计和开发
如需其他信息或资源,请点击以下任一标题进入详情页面查看(如有)。
PUREPATHCONSOLE — 适用于音频系统设计和开发的 PurePath™ 控制台图形开发套件
PurePath 控制台的直观图形界面使音频设计非常直接,因为无需高级音频设计专业知识。以缩短生产开发时间为目的的易用图形界面中提供了许多 PurePath 控制台高级控制功能,这些功能有助于实现高度优化的音频性能、超低功耗和无缝系统集成。
支持的器件:
PurePath™ Console 1:PCM5142、TAS5721、TAS5729MD、TAS5731 和 TAS5760xx
(...)
PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®
借助 PSpice for TI 的设计和仿真环境及其内置的模型库,您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案,然后再进行布局和制造,可缩短产品上市时间并降低开发成本。
在 PSpice for TI 设计和仿真工具中,您可以搜索 TI (...)
封装 | 引脚 | 下载 |
---|---|---|
VQFN (RGE) | 24 | 查看选项 |
订购和质量
- RoHS
- REACH
- 器件标识
- 引脚镀层/焊球材料
- MSL 等级/回流焊峰值温度
- MTBF/时基故障估算
- 材料成分
- 鉴定摘要
- 持续可靠性监测
- 制造厂地点
- 封装厂地点
推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。