主页 电源管理 LCD 和 OLED 显示电源和驱动器
主页
电源管理
LCD 和 OLED 显示电源和驱动器

BUF20800

正在供货

具有两个可编程 VCOM 通道的 18 通道伽马电压发生器

立即订购
数据表

BUF20800

正在供货
数据表 立即订购

产品详情

Display type LCD unipolar IC integration Gamma buffer, VCOM Vin (min) (V) 7 Vin (max) (V) 18 Applications 13 to 21 inches, 21 inches and above, 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) 7 Source driver voltage (max) (V) 18 Level shifter/scan driver (Ch) 0 Features Gamma buffer, I2C interface, VCOM or op amp Rating Catalog Operating temperature range (°C) -40 to 95
Display type LCD unipolar IC integration Gamma buffer, VCOM Vin (min) (V) 7 Vin (max) (V) 18 Applications 13 to 21 inches, 21 inches and above, 7 inches or less, 7 to 13 inches Source driver voltage (min) (V) 7 Source driver voltage (max) (V) 18 Level shifter/scan driver (Ch) 0 Features Gamma buffer, I2C interface, VCOM or op amp Rating Catalog Operating temperature range (°C) -40 to 95
HTSSOP (DCP) 38 62.08 mm² 9.7 x 6.4
  • 18-CHANNEL GAMMA CORRECTION
  • 2-CHANNEL PROGRAMMABLE VCOM:
    100mA IOUT
  • 10-BIT RESOLUTION
  • RAIL-TO-RAIL OUTPUT
  • LOW SUPPLY CURRENT: 900µA/ch
  • SUPPLY VOLTAGE: 7V to 18V
  • DIGITAL SUPPLY: 2.0V to 5.5V
  • INDUSTRY-STANDARD, TWO-WIRE INTERFACE:
    3.4MHz High-Speed Mode
  • HIGH ESD RATING:
    4kV HBM, 1kV CDM, 200V MM
  • DEMO BOARD AND SOFTWARE AVAILABLE
  • APPLICATIONS
    • REPLACES RESISTOR-BASED GAMMA SOLUTIONS
    • TFT-LCD REFERENCE DRIVERS
    • DYNAMIC GAMMA CONTROL

PowerPAD is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.
  • 18-CHANNEL GAMMA CORRECTION
  • 2-CHANNEL PROGRAMMABLE VCOM:
    100mA IOUT
  • 10-BIT RESOLUTION
  • RAIL-TO-RAIL OUTPUT
  • LOW SUPPLY CURRENT: 900µA/ch
  • SUPPLY VOLTAGE: 7V to 18V
  • DIGITAL SUPPLY: 2.0V to 5.5V
  • INDUSTRY-STANDARD, TWO-WIRE INTERFACE:
    3.4MHz High-Speed Mode
  • HIGH ESD RATING:
    4kV HBM, 1kV CDM, 200V MM
  • DEMO BOARD AND SOFTWARE AVAILABLE
  • APPLICATIONS
    • REPLACES RESISTOR-BASED GAMMA SOLUTIONS
    • TFT-LCD REFERENCE DRIVERS
    • DYNAMIC GAMMA CONTROL

PowerPAD is a registered trademark of Texas Instruments.
All other trademarks are the property of their respective owners.

The BUF20800 is a programmable voltage reference generator designed for gamma correction in TFT-LCD panels. It provides 18 programmable outputs for gamma correction and two channels for VCOM adjustment, each with 10-bit resolution.

This programmability replaces the traditional, timeconsuming process of changing resistor values to optimize the various gamma voltages and allows designers to determine the correct gamma voltages for a panel very quickly. Required changes can also be easily implemented without hardware changes.

The BUF20800 uses TI’s latest, small-geometry analog CMOS process, which makes it a very competitive choice for full production, not just evaluation.

Programming of each output occurs through an industry-standard, two-wire serial interface. Unlike existing programmable buffers, the BUF20800 offers a high-speed mode that allows clock speeds up to 3.4MHz.

For lower channel count, please contact your local sales or marketing representative.

The BUF20800 is available in an HTSSOP-38 PowerPAD™ package. It is specified from –40°C to +85°C.

The BUF20800 is a programmable voltage reference generator designed for gamma correction in TFT-LCD panels. It provides 18 programmable outputs for gamma correction and two channels for VCOM adjustment, each with 10-bit resolution.

This programmability replaces the traditional, timeconsuming process of changing resistor values to optimize the various gamma voltages and allows designers to determine the correct gamma voltages for a panel very quickly. Required changes can also be easily implemented without hardware changes.

The BUF20800 uses TI’s latest, small-geometry analog CMOS process, which makes it a very competitive choice for full production, not just evaluation.

Programming of each output occurs through an industry-standard, two-wire serial interface. Unlike existing programmable buffers, the BUF20800 offers a high-speed mode that allows clock speeds up to 3.4MHz.

For lower channel count, please contact your local sales or marketing representative.

The BUF20800 is available in an HTSSOP-38 PowerPAD™ package. It is specified from –40°C to +85°C.
open-in-new 查找其他 LCD 和 OLED 显示电源和驱动器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 4
类型 标题 下载最新的英语版本 日期
* 数据表 18-Channel, Gamma Voltage Generator with Two Programmable Vcom Channels 数据表 (Rev. E) 2007年 12月 5日
应用手册 Driving Capacitive Loads with Gamma Buffers 2012年 11月 20日
EVM 用户指南 BUF20800/BUF20820EVM User Guide 2011年 4月 8日
应用手册 所选封装材料的热学和电学性质 2008年 10月 16日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

支持软件

SBOC395 — BUF20800-20820 EVM Source Code

支持的产品和硬件

支持的产品和硬件

产品
LCD 和 OLED 显示电源和驱动器
BUF20800 — 具有两个可编程 VCOM 通道的 18 通道伽马电压发生器
下载
支持软件

SBOC396 — BUF20800/BUF20820 EVM Software

支持的产品和硬件

支持的产品和硬件

产品
LCD 和 OLED 显示电源和驱动器
BUF20800 — 具有两个可编程 VCOM 通道的 18 通道伽马电压发生器
下载
仿真模型

Gamma Buffer I2C IBIS Model

SBOM409.ZIP (39 KB) - IBIS Model
下载
仿真模型

INA271 Generic Spice Model Listing (Rev. A)

SBOC286A.ZIP (37 KB) - Spice Model
下载
仿真模型

INA271 TINA-TI Reference Design (Rev. B)

SBOC285B.TSC (176 KB) - TINA-TI Reference Design
下载
仿真模型

INA271 TINA-TI Spice Model (Rev. A)

SBOM313A.ZIP (6 KB) - TINA-TI Spice Model
下载
模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
HTSSOP (DCP) 38 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

推荐产品可能包含与 TI 此产品相关的参数、评估模块或参考设计。

支持和培训

视频