主页 电源管理 LCD 和 OLED 显示电源和驱动器
主页
电源管理
LCD 和 OLED 显示电源和驱动器

BUF01900

不推荐用于新设计

用于 VCOM 调节的参考电压生成器

立即订购
数据表

BUF01900

不推荐用于新设计
数据表 立即订购

产品详情

Display type LCD unipolar IC integration Gamma buffer Vin (min) (V) 7 Vin (max) (V) 18 Applications 13 to 21 inches, 21 inches and above, 7 inches or less, 7 to 13 inches Level shifter/scan driver (Ch) 0 Features I2C interface, VCOM or op amp Rating Catalog Operating temperature range (°C) to
Display type LCD unipolar IC integration Gamma buffer Vin (min) (V) 7 Vin (max) (V) 18 Applications 13 to 21 inches, 21 inches and above, 7 inches or less, 7 to 13 inches Level shifter/scan driver (Ch) 0 Features I2C interface, VCOM or op amp Rating Catalog Operating temperature range (°C) to
TSSOP (PW) 8 19.2 mm² 3 x 6.4 VSON (DRC) 10 9 mm² 3 x 3
  • 10-BIT RESOLUTION
  • RAIL-TO-RAIL OUTPUT
  • ONBOARD NONVOLATILE MEMORY
  • IOUT: 100mA
  • LOW SUPPLY CURRENT: 900µA
  • SUPPLY VOLTAGE: 7V to 18V
  • DIGITAL SUPPLY: 2.0V to 5.5V
  • INDUSTRY-STANDARD, TWO-WIRE INTERFACE
  • HIGH ESD RATING: 2kV HBM, 500V CDM
  • APPLICATIONS
    • LCD PANEL VCOM CALIBRATION
    • LCD PANEL BRIGHTNESS AND CONTRAST CONTROL
    • POTENTIOMETER REPLACEMENT
    • MOTOR DRIVE
    • PROGRAMMABLE POWER SUPPLY
    • PROGRAMMABLE OFFSET ADJUSTMENT
    • ACTUATOR CONTROL

PowerPAD is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.
  • 10-BIT RESOLUTION
  • RAIL-TO-RAIL OUTPUT
  • ONBOARD NONVOLATILE MEMORY
  • IOUT: 100mA
  • LOW SUPPLY CURRENT: 900µA
  • SUPPLY VOLTAGE: 7V to 18V
  • DIGITAL SUPPLY: 2.0V to 5.5V
  • INDUSTRY-STANDARD, TWO-WIRE INTERFACE
  • HIGH ESD RATING: 2kV HBM, 500V CDM
  • APPLICATIONS
    • LCD PANEL VCOM CALIBRATION
    • LCD PANEL BRIGHTNESS AND CONTRAST CONTROL
    • POTENTIOMETER REPLACEMENT
    • MOTOR DRIVE
    • PROGRAMMABLE POWER SUPPLY
    • PROGRAMMABLE OFFSET ADJUSTMENT
    • ACTUATOR CONTROL

PowerPAD is a registered trademark of Texas Instruments. All other trademarks are the property of their respective owners.

The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the integrated nonvolatile memory.

An initial output voltage and adjustment range can be set by an external resistor-divider. With its large output current capability (up to 100mA), the BUF01900 and BUF01901 are ideally suited as programmable VCOM calibrators in LCD panels.

The BUF01901 has the digital-to-analog converter (DAC) output brought out directly. It has a slightly lower cost than the BUF01900, and works very well with the integrated VCOM in traditional gamma buffers such as the BUFxx702, BUFxx703, BUFxx704 and BUF11705.

The BUF01900 and BUF01901 are both available in TSSOP-8 and 3mm x 3mm DFN-10 packages. The DFN-10 package (only 0.9mm in height) is especially well-suited for notebook computers. Both devices are specified from -40°C to +85°C.

The BUF01900 and BUF01901 provide a programmable voltage output with 10-bit resolution. Programming of the output occurs through an industry-standard, two-wire serial interface. Once the correct VCOM voltage is established it can easily be stored into the integrated nonvolatile memory.

An initial output voltage and adjustment range can be set by an external resistor-divider. With its large output current capability (up to 100mA), the BUF01900 and BUF01901 are ideally suited as programmable VCOM calibrators in LCD panels.

The BUF01901 has the digital-to-analog converter (DAC) output brought out directly. It has a slightly lower cost than the BUF01900, and works very well with the integrated VCOM in traditional gamma buffers such as the BUFxx702, BUFxx703, BUFxx704 and BUF11705.

The BUF01900 and BUF01901 are both available in TSSOP-8 and 3mm x 3mm DFN-10 packages. The DFN-10 package (only 0.9mm in height) is especially well-suited for notebook computers. Both devices are specified from -40°C to +85°C.
open-in-new 查找其他 LCD 和 OLED 显示电源和驱动器
下载 观看带字幕的视频 视频

技术文档

star =有关此产品的 TI 精选热门文档
未找到结果。请清除搜索并重试。
查看全部 3
类型 标题 下载最新的英语版本 日期
* 数据表 Programmable Voltage Source with Memory 数据表 (Rev. A) 2006年 10月 23日
应用手册 Driving Capacitive Loads with Gamma Buffers 2012年 11月 20日
应用手册 所选封装材料的热学和电学性质 2008年 10月 16日

设计和开发

如需其他信息或资源，请点击以下任一标题进入详情页面查看（如有）。

仿真模型

Gamma Buffer I2C IBIS Model

SBOM409.ZIP (39 KB) - IBIS Model
下载
计算工具

SBOC222 — Resistor Divider Calculator.ZIP

支持的产品和硬件

支持的产品和硬件

产品
LCD 和 OLED 显示电源和驱动器
BUF01900 — 用于 VCOM 调节的参考电压生成器
下载
模拟工具

PSPICE-FOR-TI — 适用于 TI 设计和模拟工具的 PSpice®

PSpice® for TI 可提供帮助评估模拟电路功能的设计和仿真环境。此功能齐全的设计和仿真套件使用 Cadence® 的模拟分析引擎。PSpice for TI 可免费使用，包括业内超大的模型库之一，涵盖我们的模拟和电源产品系列以及精选的模拟行为模型。

借助 PSpice for TI 的设计和仿真环境及其内置的模型库，您可对复杂的混合信号设计进行仿真。创建完整的终端设备设计和原型解决方案，然后再进行布局和制造，可缩短产品上市时间并降低开发成本。

在 PSpice for TI 设计和仿真工具中，您可以搜索 TI (...)
发送申请
封装 引脚 下载
TSSOP (PW) 8 查看选项
VSON (DRC) 10 查看选项
应遵守 TI 评估类商品的标准条款与条件。

订购和质量

包含信息：
  • RoHS
  • REACH
  • 器件标识
  • 引脚镀层/焊球材料
  • MSL 等级/回流焊峰值温度
  • MTBF/时基故障估算
  • 材料成分
  • 鉴定摘要
  • 持续可靠性监测
包含信息：
  • 制造厂地点
  • 封装厂地点

支持和培训

视频