ZHCSKS8A December   2020  – January 2023 TLV62595

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Pin Configuration and Functions
  6. 6 Specifications
    1. 6.1 Absolute Maximum Ratings
    2. 6.2 ESD Ratings
    3. 6.3 Recommended Operating Conditions
    4. 6.4 Thermal Information
    5. 6.5 电气特性
    6. 6.6 Typical Characteristics
  7. 7 Detailed Description
    1. 7.1 Overview
    2. 7.2 Functional Block Diagram
    3. 7.3 Feature Description
      1. 7.3.1 Pulse Width Modulation (PWM) Operation
      2. 7.3.2 Power Save Mode (PSM) Operation
      3. 7.3.3 Minimum Duty Cycle and 100% Mode Operation
      4. 7.3.4 Soft Start
      5. 7.3.5 Switch Current Limit and HICCUP Short-Circuit Protection
      6. 7.3.6 Undervoltage Lockout
      7. 7.3.7 Thermal Shutdown
    4. 7.4 Device Functional Modes
      1. 7.4.1 Enable, Disable and Output Discharge
      2. 7.4.2 Power Good
  8. 8 Application and Implementation
    1. 8.1 Application Information
    2. 8.2 Typical Application
      1. 8.2.1 Design Requirements
      2. 8.2.2 Detailed Design Procedure
        1. 8.2.2.1 Custom Design With WEBENCH® Tools
        2. 8.2.2.2 Setting The Output Voltage
        3. 8.2.2.3 Output Filter Design
        4. 8.2.2.4 Inductor Selection
        5. 8.2.2.5 Capacitor Selection
      3. 8.2.3 Application Curves
    3. 8.3 Power Supply Recommendations
    4. 8.4 Layout
      1. 8.4.1 Layout Guidelines
      2. 8.4.2 Layout Example
        1. 8.4.2.1 Thermal Considerations
  9. 9 Device and Documentation Support
    1. 9.1 Device Support
      1. 9.1.1 第三方产品免责声明
      2. 9.1.2 Development Support
        1. 9.1.2.1 Custom Design With WEBENCH® Tools
    2. 9.2 Documentation Support
      1. 9.2.1 Related Documentation
    3. 9.3 接收文档更新通知
    4. 9.4 支持资源
    5. 9.5 Trademarks
    6. 9.6 静电放电警告
    7. 9.7 术语表
  10. 10Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.2.1 Design Requirements

For this design example, use the parameters listed in Table 8-1 as the input parameters.

Table 8-1 Design Parameters
DESIGN PARAMETER EXAMPLE VALUE
Input voltage, TLV62595 2.5 V to 5.5 V
Output voltage 1.8 V
Output ripple voltage < 20 mV
Maximum output current, TLV62595 4 A

Table 8-2 lists the components used for the example.

Table 8-2 List of Components
REFERENCE DESCRIPTION MANUFACTURER
C1 4.7 µF, Ceramic capacitor, 6.3 V, X7R, size 0603, JMK107BB7475MA Taiyo Yuden
C2 3 × 10 µF, Ceramic capacitor, 10 V, X7R, size 0603, GRM188Z71A106MA73D Murata
C3 120 pF, Ceramic capacitor, 50 V, size 0402 Std
L1 0.47 µH, Power Inductor, XFL4015-471MEB Coilcraft
R1 Depending on the output voltage, 1%, size 0402 Std
R2 100 kΩ, Chip resistor, 1/16 W, 1%, size 0402 Std
R3 100 kΩ, Chip resistor, 1/16 W, 1%, size 0402 Std
  1. See the Third-Party Products Disclaimer.