ZHCSQI9I 数据表 | 德州仪器 TI.com.cn

ZHCSQI9I December 2003 – March 2024 SN74AVC1T45

PRODUCTION DATA

封装选项

请参考 PDF 数据表获取器件具体的封装图。

机械数据 (封装 | 引脚)

DBV|6
DRL|6
YZP|6
DCK|6

散热焊盘机械数据 (封装 | 引脚)

DCK|6
- QFND228B

订购信息

5.1 Absolute Maximum Ratings

over operating free-air temperature range (unless otherwise noted) ⁽¹⁾

			MIN	MAX	UNIT
V_CCA, V_CCB	Supply voltage		–0.5	4.6	V
V_I	Input voltage ⁽²⁾	I/O ports (A port)	–0.5	4.6	V
		I/O ports (B port)	–0.5	4.6
		Control inputs	–0.5	4.6
V_O	Voltage applied to any output in the high-impedance or power-off state⁽²⁾	A port	–0.5	4.6	V
V_O		B port	–0.5	4.6	V
V_O	Voltage applied to any output in the high or low state⁽²⁾ ⁽³⁾	A port	–0.5	V_CCA + 0.5	V
V_O		B port	–0.5	V_CCB + 0.5	V
I_IK	Input clamp current	V_I < 0		–50	mA
I_OK	Output clamp current	V_O < 0		–50	mA
I_O	Continuous output current		–50	50	mA
	Continuous current through V_CCA, V_CCB, or GND		–100	100	mA
T_stg	Storage temperature		–65	150	°C

(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under Recommended Operating Conditions is not implied. Exposure to absolute maximum rated conditions for extended periods may affect device reliability.

(2) The input negative-voltage and output voltage ratings may be exceeded if the input and output current ratings are observed.

(3) The output positive-voltage rating may be exceeded up to 4.6V maximum if the output current ratings are observed.