ZHCSLE3 June   2023 OPT4060

PRODUCTION DATA  

  1.   1
  2. 特性
  3. 应用
  4. 说明
  5. Revision History
  6. 说明(续)
  7. Pin Configuration and Functions
  8. Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Typical Characteristics
  9. Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 Infrared Light Rejection
      2. 8.3.2 Automatic Full-Scale Range Setting
      3. 8.3.3 Output Register CRC and Counter
        1. 8.3.3.1 Output Sample Counter
        2. 8.3.3.2 Output CRC
        3. 8.3.3.3 Threshold Detection
    4. 8.4 Device Functional Modes
      1. 8.4.1 Modes of Operation
      2. 8.4.2 Interrupt Modes of Operation
      3. 8.4.3 Light Range Selection
      4. 8.4.4 Selecting Conversion Time
      5. 8.4.5 Light and Color Measurement
        1. 8.4.5.1 Determining ADC Codes for Each Channel
        2. 8.4.5.2 Lux and Color Calculations
        3. 8.4.5.3 Threshold Detection Calculations
      6. 8.4.6 Light Resolution
    5. 8.5 Programming
      1. 8.5.1 I2C Bus Overview
        1. 8.5.1.1 Serial Bus Address
        2. 8.5.1.2 Serial Interface
      2. 8.5.2 Writing and Reading
        1. 8.5.2.1 High-Speed I2C Mode
        2. 8.5.2.2 Burst Read Mode
        3. 8.5.2.3 General-Call Reset Command
        4. 8.5.2.4 SMBus Alert Response
    6. 8.6 Register Maps
      1. 8.6.1 Register Map
  10. Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Electrical Interface
        1. 9.2.1.1 Design Requirements
          1. 9.2.1.1.1 Optical Interface
        2. 9.2.1.2 Detailed Design Procedure
          1. 9.2.1.2.1 Optomechanical Design
        3. 9.2.1.3 Application Curve
    3. 9.3 Best Design Practices
    4. 9.4 Power Supply Recommendations
    5. 9.5 Layout
      1. 9.5.1 Layout Guidelines
      2. 9.5.2 Layout Example
      3. 9.5.3 Soldering and Handling Recommendations
  11. 10Device and Documentation Support
    1. 10.1 Documentation Support
      1. 10.1.1 Related Documentation
    2. 10.2 接收文档更新通知
    3. 10.3 支持资源
    4. 10.4 Trademarks
    5. 10.5 静电放电警告
    6. 10.6 术语表
  12. 11Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

Electrical Characteristics

All specifications at TA = 25°C, VDD = 3.3 V, 800-ms conversion-time per channel (CONVERSION_TIME=0xB), automatic full-scale range (RANGE = 0xC), white LED and normal-angle incidence of light, unless otherwise specified.
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
Optical
Number of Channels 4
ʎpeak Peak irradiance spectral responsivity CH0 (R) 605 nm
CH1(G) 555 nm
CH2(B) 450 nm
CH3(W) 500 nm
ADC resolution 9 20 bits
Range determination 3 bits
Tintg Light Integration-time per channel (4) Conversion-time CT = 0x6 25 ms
Conversion-time CT = 0xB 800 ms
RCH0 Peak Responsivity CH0 (R) Lowest auto gain range, 800ms conversion time per channel 1950 codes per μW/cm2
RCH1 CH1 (G) Lowest auto gain range, 800ms conversion time per channel  3100 codes per μW/cm2
RCH2 CH2 (B) Lowest auto gain range, 800ms conversion time per channel  1990 codes per μW/cm2
RCH3 CH3 (W) Lowest auto gain range, 800ms conversion time per channel  5640 codes per μW/cm2
ERlux Equivalent Resolution Lowest auto gain range, 100ms conversion-time per channel 17.2 mlux
Lowest auto gain range, 800ms conversion-time per channel 2.15 mlux
EvFS Full-scale equivalent Illuminance 144284 lux
Ev Measurement output result from lux measurement 2000 lux input(1) 1800 2000 2200 lux
Relative accuracy between gain ranges (2) All channels 0.6 %
EvIR Infrared response(6) 850nm near infra-red, all channels except for CH3 (W) 0.2 %
Light source variation for lux measurement (incandescent, halogen, fluorescent) Bare device, no cover glass 4 %
Linearity Input illuminance > 2254 lux , 100ms conversion-time per channel, all channels 2 %
Input illuminance <= 2254lux , 100ms conversion-time per channel, all channels 5 %
Dark Measurement All channels 0 10 codes
Drift across temperature CH0 (R) 0.02 %/°C
CH1 (G) 0.02 %/°C
CH2 (B) 0.05 %/°C
CH3 (W) 0.05 %/°C
Angular response (FWHM) CH0 (R) 134 °
CH1 (G) 121 °
CH2 (B) 99 °
CH3 (W) 128 °
PSRR Power-supply rejection ratio(3) VDD at 3.6 V and 1.6 V, 30 different sources, all channels 0.2 %/V
POWER SUPPLY
VDD Power supply 1.6 3.6 V
VI2C Power supply for I2C pull up resistor I2C pullup resistor, VDDVI2C 1.6 5.5 V
IQACTIVE Active Current Dark 24 µA
Full-scale lux 29 µA
IQ Quiescent current Dark 2 µA
Full-scale lux 2.6 µA
POR Power-on-reset threshold 0.8 V
DIGITAL
CIO I/O Pin Capacitance 3 pF
VIL Low-level input voltage (SDA, SCL, and ADDR) 0 0.3 X VDD V
VIH High-level input voltage (SDA, SCL, and ADDR) 0.7 X VDD 5.5 V
IIL Low-level input current (SDA, SCL, and ADDR) 0.01 0.25(5) µA
VOL Low-level output voltage (SDA and INT) IOL=3mA 0.32 V
IZH Output logic high, high-Z leakage current (SDA, INT) Measured with VDD at pin 0.01 0.25(5) µA
TEMPERATURE
Specified temperature range –40 85 °C
Tested with the white LED calibrated to 2000 lux
Characterized by measuring fixed near-full-scale light levels on the higher adjacent full-scale range setting.
PSRR is the percent change of the measured lux output from its current value, divided by the change in power supply voltage, as characterized by results from 3.6-V and 1.6-V power supplies
The conversion-time, from start of conversion until the data are ready to be read, is the integration-time plus analog-to-digital conversion-time.
The specified leakage current is dominated by the production test equipment limitations. Typical values are much smaller
Tested with a near infrared LED of 850nm wavelength