Over operating free-air temperature range (unless otherwise noted).(1) | MIN | MAX | UNIT |
---|
VS | Supply voltage (total bipolar
supplies)(4) | | | ±14 | V |
VIN | Input voltage | | VS– – 0.5 | VS+ + 0.5 | V |
VIN,Diff | Differential input
voltage(2) | | | ±7 | V |
II | Continuous input current | | | ±10 | mA |
IO | Continuous output
current(3) | TA = –40℃ to +85℃ | | ±40 | mA |
TA = 125℃ | | ±15 | mA |
PD | Continuous power dissipation | | See Section 7.4 | |
TJ | Junction temperature | | | 150 | °C |
Tstg | Storage temperature | | –65 | 125 | °C |
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause
permanent damage to the device. These are stress ratings only, which do not
imply functional operation of the device at these or anyother conditions beyond
those indicated under Recommended Operating Conditions. Exposure to
absolute-maximum-rated conditions for extended periods may affect device
reliability.
(2) Equal to the lower of ±7 V or total supply voltage.
(3) Long-term continuous output current for electromigration limits.
(4) VS is the total supply voltage given by VS = VS+ – VS– .