ZHCSJT3B May   2019  – August 2020 LP5009 , LP5012

PRODUCTION DATA  

  1. 1 特性
  2. 2 应用
  3. 3 说明
  4. 4 Revision History
  5. 5 Description (continued)
  6. 6 Pin Configuration and Functions
    1.     Pin Functions
  7. 7 Specifications
    1. 7.1 Absolute Maximum Ratings
    2. 7.2 ESD Ratings
    3. 7.3 Recommended Operating Conditions
    4. 7.4 Thermal Information
    5. 7.5 Electrical Characteristics
    6. 7.6 Timing Characteristics
    7. 7.7 Typical Characteristics
  8. 8 Detailed Description
    1. 8.1 Overview
    2. 8.2 Functional Block Diagram
    3. 8.3 Feature Description
      1. 8.3.1 PWM Control for Each Channel
        1. 8.3.1.1 Independent Color Mixing Per RGB LED Module
        2. 8.3.1.2 Independent Intensity Control Per RGB LED Module
          1. 8.3.1.2.1 Intensity-Control Register Configuration
          2. 8.3.1.2.2 Logarithmic- or Linear-Scale Intensity Control
        3. 8.3.1.3 12-Bit, 29-kHz PWM Generator Per Channel
          1. 8.3.1.3.1 PWM Generator
        4. 8.3.1.4 PWM Phase-Shifting
      2. 8.3.2 LED Bank Control
      3. 8.3.3 Current Range Setting
      4. 8.3.4 Automatic Power-Save Mode
      5. 8.3.5 Protection Features
        1. 8.3.5.1 Thermal Shutdown
        2. 8.3.5.2 UVLO
    4. 8.4 Device Functional Modes
    5. 8.5 Programming
      1. 8.5.1 I2C Interface
        1. 8.5.1.1 Data Validity
        2. 8.5.1.2 Start and Stop Conditions
        3. 8.5.1.3 Transferring Data
        4. 8.5.1.4 I2C Slave Addressing
        5. 8.5.1.5 Control-Register Write Cycle
        6. 8.5.1.6 Control-Register Read Cycle
        7. 8.5.1.7 Auto-Increment Feature
    6. 8.6 Register Maps
      1.      45
      2. 8.6.1  DEVICE_CONFIG0 (Address = 0h) [reset = 0h]
      3. 8.6.2  DEVICE_CONFIG1 (Address = 1h) [reset = 3Ch]
      4. 8.6.3  LED_CONFIG0 (Address = 2h) [reset = 00h]
      5. 8.6.4  BANK_BRIGHTNESS (Address = 3h) [reset = FFh]
      6. 8.6.5  BANK_A_COLOR (Address = 4h) [reset = 00h]
      7. 8.6.6  BANK_B_COLOR (Address = 5h) [reset = 00h]
      8. 8.6.7  BANK_C_COLOR (Address = 6h) [reset = 00h]
      9. 8.6.8  LED0_BRIGHTNESS (Address = 7h) [reset = FFh]
      10. 8.6.9  LED1_BRIGHTNESS (Address = 8h) [reset = FFh]
      11. 8.6.10 LED2_BRIGHTNESS (Address = 9h) [reset = FFh]
      12. 8.6.11 LED3_BRIGHTNESS (Address = 0Ah) [reset = FFh]
      13. 8.6.12 OUT0_COLOR (Address = 0Bh) [reset = 00h]
      14. 8.6.13 OUT1_COLOR (Address = 0Ch) [reset = 00h]
      15. 8.6.14 OUT2_COLOR (Address = 0Dh) [reset = 00h]
      16. 8.6.15 OUT3_COLOR (Address = 0Eh) [reset = 00h]
      17. 8.6.16 OUT4_COLOR (Address = 0Fh) [reset = 00h]
      18. 8.6.17 OUT5_COLOR (Address = 10h) [reset = 00h]
      19. 8.6.18 OUT6_COLOR (Address = 11h) [reset = 00h]
      20. 8.6.19 OUT7_COLOR (Address = 12h) [reset = 00h]
      21. 8.6.20 OUT8_COLOR (Address = 13h) [reset = 00h]
      22. 8.6.21 OUT9_COLOR (Address = 14h) [reset = 00h]
      23. 8.6.22 OUT10_COLOR (Address = 15h) [reset = 00h]
      24. 8.6.23 OUT11_COLOR (Address = 16h) [reset = 00h]
      25. 8.6.24 RESET (Address = 17h) [reset = 00h]
  9. 9 Application and Implementation
    1. 9.1 Application Information
    2. 9.2 Typical Application
      1. 9.2.1 Design Requirements
      2. 9.2.2 Detailed Design Procedure
      3. 9.2.3 Application Curves
  10. 10Power Supply Recommendations
  11. 11Layout
    1. 11.1 Layout Guidelines
    2. 11.2 Layout Examples
  12. 12Device and Documentation Support
    1. 12.1 Related Links
    2. 12.2 Receiving Notification of Documentation Updates
    3. 12.3 支持资源
    4. 12.4 Trademarks
    5. 12.5 静电放电警告
    6. 12.6 术语表
  13. 13Mechanical, Packaging, and Orderable Information

封装选项

机械数据 (封装 | 引脚)
散热焊盘机械数据 (封装 | 引脚)
订购信息

8.3.1 PWM Control for Each Channel

Most traditional LED drivers are designed for the single-color LEDs, in which the high-resolution PWM generator is used for intensity control only. However, for RGB LEDs, both the color mixing and intensity control must be addressed to achieve the target effect. With the traditional solution, the users must handle the color mixing and intensity control simultaneously with a single PWM register. Several undesired effects occur: the limited dimming steps, the complex software design and the color distortion when using a logarithmic scale control.

The LP50xx device is designed with independent color mixing and intensity control, which makes the RGB LED effects fancy and the control experience straightforward. With the inputs of the color-mixing register and the intensity-control register, the final PWM generator output for each channel is 12-bit resolution and 29-kHz dimming frequency, which helps achieve a smooth dimming effect and eliminates audible noise. See Figure 8-1.

GUID-DD99BA7C-AFC1-4A1F-8917-BD372F270BDC-low.gifFigure 8-1 PWM Control Scheme for Each Channel