TIDA-010133
고 임피던스, 500MHZ 대역폭 오실로스코프 아날로그 프런트 엔드 레퍼런스 설계
TIDA-010133
개요
High Bandwidth data acquisition systems, like a digital storage oscilloscope (DSO), require the analog front-end (AFE) signal chain to have wide (-3dB) bandwidth to measure a wide range of signals, optional high input impedance to prevent loading of the measured signal, low noise to prevent degradation of signal to noise ration (SNR), and good distortion performance to maintain signal fidelity. Typical implementations of an AFE typically requires either a complex discrete design or the development of a custom front-end ASIC. This reference design provides a simpler cost-effective AFE without sacrificing performance.
특징
- 500MHz input bandwidth
- Selectable impedance (50Ω or 1MΩ)
- Support DC/AC coupling
- Wide dynamic range of 40dB programmable gain
- Support trigger function
- Precision DAC for offset control and commonmode control
- SMA connector to support TI high-speed ADC EVM
완조립 보드는 테스팅과 성능 검증을 위해서만 개발되었으며 판매를 위한 것이 아닙니다.
설계 파일 및 제품
설계 파일
바로 사용 가능한 시스템 파일을 다운로드하여 설계 프로세스에 속도를 높여 보십시오.
설계 구성요소, 참조 지정자 및 제조업체/부품 번호의 전체 목록
제품
TI 제품을 설계 및 잠재적 대안에 포함합니다.
기술 자료
| 상위 문서 | 유형 | 직함 | 형식 옵션 | 최신 영어 버전 다운로드 | 날짜 |
|---|---|---|---|---|---|
| * | 설계 가이드 | High-Impedance, 500MHz Bandwidth Oscilloscope Analog Front End Reference Design | PDF | HTML | 2026. 7. 29 |