TAS2505EVM

TAS2505 2W 클래스 D 오디오 증폭기 평가 모듈

TAS2505EVM

지금 주문하기

개요

The TAS2505 is a low power digital input speaker amp with support for 24-bit digital I2S data mono playback.

In addition to driving a speaker amp up to 4-Ω, the device also features a mono headphone driver and a programmable digital-signal processing block. The digital audio data format is programmable to work with popular audio standard protocols (I2S, left/right-justified) in master, slave, DSP and TDM modes. The programmable digital-signal processing block can support Bass boost, treble, or EQ functions. An on-chip PLL provides the high-speed clock needed by the digital signal-processing block. The volume level can be controlled by register control. The audio functions are controlled using the I2C ™ serial bus or SPI bus.

The device includes an on-board LDO that runs off the speaker power supply to handle all internal device analog and digital power needs. The included POR as power-on-reset circuit reliably resets the device into its default state so no external reset is required at normal usage; however, the device does have a reset pin for more complex system initialization needs. The device also includes two analog inputs for mixing and muxing in both speaker and headphone analog paths.

특징
  • Digital input mono speaker amp
  • Supports 8-kHz to 96-kHz Sample Rates
  • Mono Class-D BTL Speaker Driver (2.6 W 4 Ω or 1.7 W Into 8 Ω)
  • Mono Headphone/Lineout Driver
  • Two Single-Ended Inputs With Output Mixing and Level Control
  • Embedded Power-on-Reset
  • Integrated LDO
  • Programmable Digital Audio Processing Blocks for Bass Boost, Treble, EQ With up to Six Biquads for Playback
  • Integrated PLL Used for Programmable Digital Audio Processing Blocks
  • I2S, Left-Justified, Right-Justified, DSP, and TDM Audio Interfaces
  • I2C and SPI control with auto-increment
  • Full Power-Down Control
  • 4mm × 4mm 24-Pin QFN Package
  • Power Supplies:
    • Analog: 1.5 V–1.95 V
    • Digital Core: 1.65 V–1.95 V
    • Digital I/O: 1.1 V–3.6 V
    • Class-D: 2.7 V–5.5 V (SPKVDD ≥ AVDD)

  • TAS2505EVM Evaluation Board
Not Included
  • Codec Control Console GUI; download separately
  • Micro-USB cable

범용 오디오 증폭기
TAS2505 2W, 모노, 디지털 및 아날로그 입력 클래스 D 오디오 증폭기(오디오 프로세싱 및 모노 헤드폰 증폭기 지원)

 

오토모티브 오디오 증폭기
TAS2505-Q1 오디오 프로세싱을 지원하는 차량용, 2W, 모노, 디지털 또는 아날로그 입력 클래스-D 증폭기
다운로드 스크립트와 함께 비디오 보기 비디오

시작하기

  1. TAS2505EVM 주문
  2. TAS25xx 코덱 제어 EVM GUI 다운로드

주문 및 개발 시작

평가 보드

TAS2505EVM — TAS2505 Evaluation Module

지원되는 제품 및 하드웨어
재고 있음
제한:
TI.com에 재고 없음
TI.com에서 구매할 수 없음

TAS2505EVM TAS2505 Evaluation Module

close
버전: null
출시 날짜:
평가 모듈(EVM)용 GUI

SLAC772 — TAS25xx Codec Control EVM GUI

지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
범용 오디오 증폭기
TAS2505 2W, 모노, 디지털 및 아날로그 입력 클래스 D 오디오 증폭기(오디오 프로세싱 및 모노 헤드폰 증폭기 지원) TAS2521 miniDSP 및 18mW, 모노 헤드폰 드라이버를 지원하는 2W, 모노, 디지털 및 아날로그 입력 클래스-D 오디오 증폭기
하드웨어 개발
레퍼런스 디자인
TIDA-01529 진단 기능이 있는 클러스터 및 eCall 오디오 레퍼런스 설계
평가 보드
TAS2505EVM TAS2505 2W 클래스 D 오디오 증폭기 평가 모듈
다운로드 옵션

SLAC772 TAS25xx Codec Control EVM GUI

close
버전: 01.00.00.00
출시 날짜: 2018. 3. 8
제품
범용 오디오 증폭기
TAS2505 2W, 모노, 디지털 및 아날로그 입력 클래스 D 오디오 증폭기(오디오 프로세싱 및 모노 헤드폰 증폭기 지원) TAS2521 miniDSP 및 18mW, 모노 헤드폰 드라이버를 지원하는 2W, 모노, 디지털 및 아날로그 입력 클래스-D 오디오 증폭기
하드웨어 개발
레퍼런스 디자인
TIDA-01529 진단 기능이 있는 클러스터 및 eCall 오디오 레퍼런스 설계
평가 보드
TAS2505EVM TAS2505 2W 클래스 D 오디오 증폭기 평가 모듈

출시 정보

The design resource accessed as www.ti.com/lit/zip/slac772 or www.ti.com/lit/xx/slac772/slac772.zip has been migrated to a new user experience at www.ti.com/tool/download/SLAC772. Please update any bookmarks accordingly.
TI의 평가 항목에 대한 표준 약관이 적용됩니다.

기술 자료

검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
3개 모두 보기
유형 직함 최신 영어 버전 다운로드 날짜
사용 설명서 TAS2505 Application Reference Guide (Rev. C) PDF | HTML 2023. 11. 28
인증서 TAS2505EVM EU Declaration of Conformity (DoC) 2019. 1. 2
사용 설명서 TAS25xx Codec Control EVM (Rev. A) 2017. 10. 31

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

포럼 주제 모두 보기(영문)

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요.