ENGCM-3P-ICORE-AM62X
Engicam i.Core-AM62x SO-DIMM system on module for AM623 and AM625 Arm Cortex-A53 1.4-GHz processors
ENGCM-3P-ICORE-AM62X
개요
The new i.Core AM62x system on module is based on the AM623 and AM625 processor device families, and the module is equipped to optimally take advantage of the 1-4 Arm® Cortex®-A53 CPU cores at up to 1.4-GHz and Cortex-M4F MCU co-processor at up to 400MHz. The cost-optimized module will offer up to Full HD (1080p, 60fps) display support and optional 3D graphics acceleration for use in a broad range of open-frame industrial HMI panels. Additionally, the extensive set of peripherals and optimized power architecture create a module well-suited for a broad range of industrial and automotive applications.
특징
- 67.6 mm x 32.1 mm
- SO-DIMM, 200 edge connector pins
- 1-GB or 2-GB DDR4, min. 8-GB eMMC
- 2x USB2.0, 2x on-board Gb Ethernet PHY, I2S audio
- Pin-to-pin compatible with other modules with EDIMM 2.0 pinout definition
- Linux Yocto, Android, CODESYS PROFINET device and controller software stacks
주문 및 개발 시작
ENGCM-3P-EDIMM-SK — Development kit for i.Core-AM62x SOM
ENGCM-3P-EDIMM-SK — Development kit for i.Core-AM62x SOM
ENGCM-3P-ICORE-AM62X — i.Core-AM62x system on module based on AM623 and AM625 quad Arm Cortex-A53 1.4-GHz processors
ENGCM-3P-ICORE-AM62X — i.Core-AM62x system on module based on AM623 and AM625 quad Arm Cortex-A53 1.4-GHz processors
지원 및 교육
비디오 시리즈
모든 비디오 보기고지 사항
위의 특정 정보 및 리소스(비-TI 사이트 링크 포함)는 타사 파트너가 제공할 수 있으며 편의를 위해 여기에 포함되어 있습니다. TI는 이러한 정보 및 리소스의 콘텐츠를 제공할 책임이 없으며, 의도한 용도 및 사용자를 대신하여 신중하게 평가해야 합니다. 이러한 정보 및 리소스를 여기에 포함한다는 것은 TI가 타사를 보증한다는 의미가 아니며, 타사 제품 또는 서비스의 적합성과 관련된 보증이나 표현으로 해석해서는 안 됩니다.