首頁 電源管理 序列器
首頁
電源管理
序列器

UCD90120A

現行

具 ACPI 支援的 12 軌電源供應序列器及監控器

立即訂購
產品規格表

UCD90120A

現行
產品規格表 立即訂購

產品詳細資料

Number of supplies monitored 13 Number of sequenced outputs 12 Rating Catalog Iq (typ) (mA) 50 Operating temperature range (°C) -40 to 125
Number of supplies monitored 13 Number of sequenced outputs 12 Rating Catalog Iq (typ) (mA) 50 Operating temperature range (°C) -40 to 125
VQFN (RGC) 64 81 mm² (9 mm × 9 mm)
  • Monitor and Sequence 12 Voltage Rails
    • All Rails Sampled Every 400 µs
    • 12-bit ADC With 2.5-V, 0.5% Internal VREF
    • Sequence Based on Time, Rail and Pin Dependencies
    • Four Programmable Undervoltage and Overvoltage Thresholds per Monitor
  • Nonvolatile Error and Peak-Value Logging per Monitor (up to 12 Fault Detail Entries)
  • Closed-Loop Margining for 10 Rails
    • Margin Output Adjusts Rail Voltage to Match User-Defined Margin Thresholds
  • Programmable Watchdog Timer and System Reset
  • Flexible Digital I/O Configuration
  • Pin-Selected Rail States
  • Multiphase PWM Clock Generator
    • Clock Frequencies From 15.259 kHz to
      125 MHz
    • Capability to Configure Independent Clock Outputs for Synchronizing Switch-Mode Power Supplies
  • JTAG and I2C/SMBus/PMBus™ Interfaces
  • Monitor and Sequence 12 Voltage Rails
    • All Rails Sampled Every 400 µs
    • 12-bit ADC With 2.5-V, 0.5% Internal VREF
    • Sequence Based on Time, Rail and Pin Dependencies
    • Four Programmable Undervoltage and Overvoltage Thresholds per Monitor
  • Nonvolatile Error and Peak-Value Logging per Monitor (up to 12 Fault Detail Entries)
  • Closed-Loop Margining for 10 Rails
    • Margin Output Adjusts Rail Voltage to Match User-Defined Margin Thresholds
  • Programmable Watchdog Timer and System Reset
  • Flexible Digital I/O Configuration
  • Pin-Selected Rail States
  • Multiphase PWM Clock Generator
    • Clock Frequencies From 15.259 kHz to
      125 MHz
    • Capability to Configure Independent Clock Outputs for Synchronizing Switch-Mode Power Supplies
  • JTAG and I2C/SMBus/PMBus™ Interfaces

The UCD90120A is a 12-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 12 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90120A offers support for margining, and general-purpose PWM functions.

Specific power states can be achieved using the Pin-Selected Rail States feature. This feature allows with the use of up to 3 GPIs to enable and disable any rail. This is useful for implementing system low-power modes and the Advanced Configuration and Power Interface (ACPI) specification that is used for hardware devices.

The TI Fusion Digital Power™ designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.

The UCD90120A is a 12-rail PMBus/I2C addressable power-supply sequencer and monitor. The device integrates a 12-bit ADC for monitoring up to 12 power-supply voltage inputs. Twenty-six GPIO pins can be used for power supply enables, power-on reset signals, external interrupts, cascading, or other system functions. Twelve of these pins offer PWM functionality. Using these pins, the UCD90120A offers support for margining, and general-purpose PWM functions.

Specific power states can be achieved using the Pin-Selected Rail States feature. This feature allows with the use of up to 3 GPIs to enable and disable any rail. This is useful for implementing system low-power modes and the Advanced Configuration and Power Interface (ACPI) specification that is used for hardware devices.

The TI Fusion Digital Power™ designer software is provided for device configuration. This PC-based graphical user interface (GUI) offers an intuitive interface for configuring, storing, and monitoring all system operating parameters.
filter 尋找其它 序列器
下載 觀看有字幕稿的影片 影片

最新版 UCD90xxx PMBus™ 命令參考可在 https://www.ti.com/fusiondocs 取得

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 UCD90120A 12-Rail Power Supply Sequencer and Monitor With ACPI Support datasheet (Rev. C) PDF | HTML 2016/6/9
應用說明 How to Interpret UCD90XXX CSV File PDF | HTML 2024/5/29
應用說明 How to Access UCD90XXX Sequencers GPIO PDF | HTML 2022/6/16
應用說明 How to Decode UCD90xxx Fault Log With PMBus (Rev. A) 2019/11/7
應用說明 Design Voltage Margining Circuit for UCD90xxx Power Sequencer and System Manager (Rev. A) 2019/5/21
應用說明 UCD90xxx Family Frequently Asked Questions and Answers (Rev. B) 2019/4/12
使用指南 UCD90xxx Sequencer and System Health Controller PMBus™ Command Reference (Rev. G) 2019/4/3
使用指南 UCD90xxx Sequencer Schematics Guidelines (Rev. C) PDF | HTML 2019/3/24
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
應用說明 How to Cascade Multiple UCD90xxx Sequencers 2017/8/10
使用指南 Fusion Digital Power Designer GUI 7.0 for the UCD90xxx Sequencer 2017/5/31
技術文章 Just the FPGA I was looking for… but how do I power it? PDF | HTML 2015/11/9
類比設計期刊 Analog Applications Journal 4Q 2014 2014/10/24
類比設計期刊 Power-supply sequencing for FPGAs 2014/10/24
測試報告 TI Power Reference Design for Xilinx® Artix®-7 (AC701) 2014/5/12
使用指南 PMP7977 User's Guide 2013/9/11
使用指南 TSW2200 Multi-Output Power Supply Board (Rev. A) 2012/12/13
應用說明 Monitoring Voltage, Current and Temperature Using the UCD9012x 2012/3/23
使用指南 UCD90SEQ64EVM-650: 64-Pin Sequencer Development Board 2010/12/27

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCD90SEQ64EVM-650 — 用於 UCD90xxx 64 針腳序列發生器和系統安全監控器的評估模組

The UCD90SEQ64EVM-650 is a fully assembled and tested circuit for evaluating the 64-pin Sequencer and System Health Controller, including the UCD90120, UCD90124, UCD90120A, UCD90124A, UCD90910 and UCD90160.

支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
應用軟體及架構

FUSION-DIGITAL-POWER-DESIGNER — Graphical User Interface Software used to configure and monitor TI digital power controllers

Fusion Digital Power™ 圖形使用者介面 (GUI) 軟體用於配置和監控選擇的德州儀器數位電源控制器和序列器/健康狀態監控器。該應用程式使用 PMBus 協定，透過 TI USB 轉接器經由序列匯流排與裝置通訊。

支援產品和硬體
應用軟體及架構

FUSION_MFR_GUI — Fusion Digital Power 製造工具

The Fusion Digital Power Manufacturing Tool (aka MFR GUI) is a Graphical User Interface used to download firmware, upgrade firmware, configure, calibrate and test .

The MFR GUI supports the same devices as Fusion Digital Power Designer software.  This tool is typically used in manufacturing (...)

支援產品和硬體
模擬型號

UCD90120A BSDL

SLVC496.ZIP (2 KB) - BSDL 模型
支援產品和硬體
模擬型號

UCD90120A IBIS Model

SLVMCL8.ZIP (16 KB) - IBIS 模型
支援產品和硬體
計算工具

SLVC676 — UCD90xxx Voltage Margining Circuit Design Tool

支援產品和硬體
參考設計

PMP7977 — 具有 PMBus 電源管理的 Xilinx Artix 7 FPGA 參考設計

The Artix 7 power management reference design board uses power modules, linear regulators, and a PMBus compliant system controller to supply all required core and auxiliary voltages needed by the FPGA, including DDR memory termination. A Digital Power graphical user interface is used to monitor the (...)

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGC) 64 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片