UCC28950
- Enhanced zero-voltage switching (ZVS) range
- Direct synchronous rectifier (SR) control
- Light-load efficiency management
including:
- Burst mode operation
- Discontinuous conduction mode (DCM), dynamic SR on/off control
- Average- or peak-current mode control with programmable slope compensation and voltage-mode control
- Closed-loop soft-start and enable function
- Programmable switching frequency up to 1 MHz with bidirectional synchronization
- (±3%) cycle-by-cycle current limit protection with hiccup mode support
- 150µA start-up current
- VDD undervoltage lockout
- Wide temperature range: –40°C to +125°C
The UCC28951 controller is an enhanced version of the UCC28950. It is a fully compatible drop-in replacement for the UCC28950. The UCC2895x devices use advanced control of the full-bridge in addition to active control of the synchronous rectifier (SR) output stage.
ZVS operation ensured over a wide range of operating conditions, while the load current naturally tunes the switching delays of the secondary-side synchronous rectifiers(SR). This functionality maximizes overall system efficiency.
Easily get started with the UCC2895x 600W phase shifted full bridge design review/application note,
The 24-pin, TSSOP package complies with RoHS requirements.
您可能會感興趣的類似產品
具備升級功能，可直接投入使用替代所比較的裝置。
技術文件
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
UCC27714EVM-551 — UCC27714 600W 相移全橋轉換器評估模組
此 600W EVM 旨在展示如何在相移全橋轉換器中運用 UCC28950 控制 IC、UCC27524A 及 UCC27714 閘極驅動器，並於 50% 到 100% 負載實現 ZVS。
UCC28950EVM-442 — UCC28950 600W 相移全橋轉換器評估模組
UCC28950EVM-442 是 600W 相移全橋式轉換器，可將 370V 至 410V DC 輸入轉換為穩壓 12V 輸出。此轉換器的設計可將 ZVS 維持至 50% 負載。此 600W EVM 旨在展示如何透過實現 50% 至 100% 負載的 ZVS，從而將 UCC28950 控制裝置用於高效率應用。為達到此高效率， UCC28950 設計用於驅動全橋式轉換器二次側同步整流器。UCC28950 也整合突衝模式和 DCM 功能，提升無負載效率
UCC28950 and UCC28951 TINA-TI Startup Reference Design (Rev. A)
UCC28950 and UCC28951 TINA-TI Steady State Reference Design (Rev. A)
SLUC210 — UCC28950 MathCAD Design Tool
SLUC222 — UCC2895x Excel 設計工具
PMP6712 — 適用 PoE 供電設備 (PSE) 的雙通道全橋式轉換器參考設計 (54 V @ 30 A)
This is a phase-shifted full-bridge converter reference design capable of delivering 1600 W of isolated output power and achieving efficiency of greater than 96%. This design uses the UCC28950 controller in a dual-phase primary/secondary configuration. An LM5017 constant on-time synchronous buck (...)
PMP7246 — 採用 PSFB ZTE 和 HSHB 的 36-60V 輸入、350W 慢汲極調變電源轉換器參考設計
This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 voltage mode forward and average current limitation backward converter (two quadrant (...)
PMP8606 — 300W 全橋相移式 (FBPS) DC/DC 電源參考設計
This design is a 100kHz FBPS converter working in voltage mode. It supports 400Vdc..750Vdc input voltage range and provides 24V/12A regulated. TI's UCC28950 part enables high efficiency at high input voltage.
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TSSOP (PW) | 24 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。