首頁 電源管理 閘極驅動器 半橋式驅動器
首頁
電源管理
閘極驅動器
半橋式驅動器

UCC27311A-Q1

現行
立即訂購
產品規格表

UCC27311A-Q1

現行
產品規格表 立即訂購

產品詳細資料

Bootstrap supply voltage (max) (V) 120 Power switch MOSFET Input supply voltage (min) (V) 8 Input supply voltage (max) (V) 17 Operating temperature range (°C) -40 to 150 Undervoltage lockout (typ) (V) 8 Rating Automotive Propagation delay time (µs) 0.02 Rise time (ns) 7.2 Fall time (ns) 5.5 Iq (mA) 0.001 Input threshold TTL Channel input logic TTL Switch node voltage (V) -20 Features Enable, Integrated bootstrap diode, Negative Voltage Handling on Input TI functional safety category Functional Safety-Capable Driver configuration Dual, Noninverting, TTL compatible
Bootstrap supply voltage (max) (V) 120 Power switch MOSFET Input supply voltage (min) (V) 8 Input supply voltage (max) (V) 17 Operating temperature range (°C) -40 to 150 Undervoltage lockout (typ) (V) 8 Rating Automotive Propagation delay time (µs) 0.02 Rise time (ns) 7.2 Fall time (ns) 5.5 Iq (mA) 0.001 Input threshold TTL Channel input logic TTL Switch node voltage (V) -20 Features Enable, Integrated bootstrap diode, Negative Voltage Handling on Input TI functional safety category Functional Safety-Capable Driver configuration Dual, Noninverting, TTL compatible
VSON (DRC) 10 9 mm² (3 mm × 3 mm)
  • Drives two N-channel MOSFETs in half-bridge configuration
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1
  • –40°C to +150°C junction temperature range
  • 120V abs max voltage on HB pin
  • 3.7A sink, 4.5A source output currents
  • 8V to 17V VDD operating range (20V abs max) with UVLO
  • –(28–VDD)V abs max negative transient tolerance on HS pin (<100ns pulse)
  • –10V to +20V abs max input pins tolerance, independent of supply voltage range (TTL compatible)
  • Switching parameters:
    • 20ns typical propagation delay times
    • 7.2ns rise and 5.5ns fall time with 1000pF load
    • 4ns typical delay matching
  • Integrated bootstrap diode
  • Enable/disable functionality with low current consumption (3µA typical) when disabled
  • Functional Safety-Capable
  • Drives two N-channel MOSFETs in half-bridge configuration
  • AEC-Q100 qualified for automotive applications:
    • Device temperature grade 1
  • –40°C to +150°C junction temperature range
  • 120V abs max voltage on HB pin
  • 3.7A sink, 4.5A source output currents
  • 8V to 17V VDD operating range (20V abs max) with UVLO
  • –(28–VDD)V abs max negative transient tolerance on HS pin (<100ns pulse)
  • –10V to +20V abs max input pins tolerance, independent of supply voltage range (TTL compatible)
  • Switching parameters:
    • 20ns typical propagation delay times
    • 7.2ns rise and 5.5ns fall time with 1000pF load
    • 4ns typical delay matching
  • Integrated bootstrap diode
  • Enable/disable functionality with low current consumption (3µA typical) when disabled
  • Functional Safety-Capable

The UCC27311A-Q1 is a robust gate driver designed to drive two N-channel MOSFETs in a half-bridge or synchronous buck configuration with an absolute maximum bootstrap voltage of 120V. Its 3.7A peak source and 4.5A peak sink current capability allows the UCC27311A-Q1 to drive large power MOSFETs with minimized switching losses during the transition through the Miller Plateau. The switching node (HS pin) can handle negative transient voltage, which allows the high-side channel to be protected from inherent negative voltages caused by parasitic inductance and stray capacitance.

The inputs are independent of supply voltage and are able to withstand -10V and +20V absolute maximum ratings. The low-side and high-side gate drivers are matched to 4ns between the turn on and turn off of each other and are controlled throught the LI and HI input pins respectively. An on-chip 120V rated bootstrap diode eliminates the need to add discrete bootstrap diodes. Undervoltage lockout (UVLO) is provided for both the high-side and the low-side drivers which provides symmetric turn on and turn off behavior and forces the outputs low if the drive voltage is below the specified threshold.

The UCC27311A-Q1 is a robust gate driver designed to drive two N-channel MOSFETs in a half-bridge or synchronous buck configuration with an absolute maximum bootstrap voltage of 120V. Its 3.7A peak source and 4.5A peak sink current capability allows the UCC27311A-Q1 to drive large power MOSFETs with minimized switching losses during the transition through the Miller Plateau. The switching node (HS pin) can handle negative transient voltage, which allows the high-side channel to be protected from inherent negative voltages caused by parasitic inductance and stray capacitance.

The inputs are independent of supply voltage and are able to withstand -10V and +20V absolute maximum ratings. The low-side and high-side gate drivers are matched to 4ns between the turn on and turn off of each other and are controlled throught the LI and HI input pins respectively. An on-chip 120V rated bootstrap diode eliminates the need to add discrete bootstrap diodes. Undervoltage lockout (UVLO) is provided for both the high-side and the low-side drivers which provides symmetric turn on and turn off behavior and forces the outputs low if the drive voltage is below the specified threshold.
filter 尋找其它 半橋式驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的裝置。
UCC27301A-Q1 現行 Automotive, 120V 3.7A/4.5A half-bridge gate driver with 7V UVLO, interlock and enable options Pin-to-pin device with input interlock
功能相同，但針腳輸出與所比較的裝置不同。
UCC27212A-Q1 現行 Automotive, 120V 3.7A/4.5A half-bridge gate driver with 6V UVLO Similar device with 5V UVLO

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 19
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 UCC27311A-Q1 Automotive 120V, 3.7A/4.5A Half-Bridge Driver with 8V UVLO and Enable datasheet (Rev. B) PDF | HTML 2024/7/23
功能安全資訊 UCC273x1A-Q1 and UCC27302A-Q1 Functional Safety FIT Rate, FMD and Pin FMA (Rev. A) PDF | HTML 2026/9/14
Product overview UCC272xx and UCC273xx: 120V Half-Bridge Gate Drivers for High-Powered Applications (Rev. A) PDF | HTML 2026/3/2
應用說明 Mapping Application Requirements with the 120V Halfbridge Gate Driver (Rev. A) PDF | HTML 2026/2/27
應用說明 Riding the Wave of Non-Isolated Gate Drivers in LEVs PDF | HTML 2025/11/14
應用說明 Selecting Gate Drivers for HVAC Systems (Rev. A) PDF | HTML 2025/11/7
應用說明 Using Half-Bridge Gate Driver to Achieve 100% Duty Cycle for High Side FET PDF | HTML 2024/3/25
應用說明 Challenges and Solutions for Half-Bridge Gate Drivers in Bidirectional DC-DC Converters PDF | HTML 2024/1/24
應用說明 Bootstrap Circuitry Selection for Half Bridge Configurations (Rev. A) PDF | HTML 2023/9/8
應用說明 Comparative Analysis of Two Different Methods for Gate-Drive Current Boosting (Rev. A) PDF | HTML 2022/2/17
應用說明 Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. D) 2021/4/7
應用說明 Implementing High-Side Switches Using Half-Bridge Gate Drivers for 48-V Battery. 2020/5/12
Application brief External Gate Resistor Selection Guide (Rev. A) 2020/2/28
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 2020/2/28
Application brief Small Price Competitive 100-V Driver for 48-V BLDC Motor Drives 2019/10/22
應用說明 Maximizing DC/DC converter designs with UCC27282 2019/1/18
應用說明 UCC27282 Improving motor drive system robustness 2019/1/11
應用說明 PFC Design Choice for On Board Charger Designs 2018/5/24
Application brief Reducing Switching Losses in On-Board Chargers for Electric Vehicles 2018/3/27

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC27282EVM-335 — UCC27282 120V、3A、5V UVLO 高壓側低壓側閘極驅動器評估模組

UCC27282EVM-335 專為評估 UCC27282DRC 而設計，這是一款具備高源極和汲極峰值電流能力的 120V 半橋閘極驅動器。此 EVM 的目標是依照產品規格表參數評估驅動器 IC。EVM 也可當成驅動器 IC 元件選擇指南使用。EVM 可用於判斷對閘極驅動器性能的 PCB 佈線圖影響。
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
計算工具

SLURB12 — UCC272xx-UCC273xx Schematic Review Template

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSON (DRC) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片