首頁 電源管理 閘極驅動器 半橋式驅動器
首頁
電源管理
閘極驅動器
半橋式驅動器

UCC27282-Q1

現行

Automotive 120V 3A half-bridge gate driver with 5V UVLO, interlock, and enable options

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
最新 UCC27302A-Q1 現行 Automotive 120V 4.5A half-bridge driver with 5V UVLO, interlock, and enable options More recent pin-to-pin device with input interlock

UCC27282-Q1

現行
產品規格表 立即訂購

產品詳細資料

Bootstrap supply voltage (max) (V) 120 Power switch MOSFET Input supply voltage (min) (V) 5.5 Input supply voltage (max) (V) 16 Peak output current (A) 3 Operating temperature range (°C) -40 to 125 Undervoltage lockout (typ) (V) 5 Rating Automotive Propagation delay time (µs) 0.016 Rise time (ns) 12 Fall time (ns) 10 Iq (mA) 0.002, 2000 Input threshold TTL Channel input logic TTL Switch node voltage (V) -14 Features Enable, Integrated bootstrap diode, Interlock, Negative Voltage Handling on Input TI functional safety category Functional Safety-Capable Driver configuration Dual inputs
Bootstrap supply voltage (max) (V) 120 Power switch MOSFET Input supply voltage (min) (V) 5.5 Input supply voltage (max) (V) 16 Peak output current (A) 3 Operating temperature range (°C) -40 to 125 Undervoltage lockout (typ) (V) 5 Rating Automotive Propagation delay time (µs) 0.016 Rise time (ns) 12 Fall time (ns) 10 Iq (mA) 0.002, 2000 Input threshold TTL Channel input logic TTL Switch node voltage (V) -14 Features Enable, Integrated bootstrap diode, Interlock, Negative Voltage Handling on Input TI functional safety category Functional Safety-Capable Driver configuration Dual inputs
HSOIC (DDA) 8 29.4 mm² 4.9 x 6 SOIC (D) 8 29.4 mm² 4.9 x 6 VSON (DRC) 10 9 mm² 3 x 3
  • AEC-Q100 qualified with following results
    • Temperature grade 1 (Tj = –40°C to 150°C)
    • HBM ESD classification level 1B
    • CDM ESD classification level C3
  • Drives two N-channel MOSFETs in high-side low-side configuration
  • 5-V typical under voltage lockout
  • Input interlock
  • Enable/disable functionality in DRC package
  • 16-ns typical propagation delay
  • 12-ns rise, 10-ns fall time with 1.8-nF load
  • 1-ns typical delay matching
  • Absolute Maximum Negative Voltage Handling on Inputs (–5 V)
  • Absolute Maximum Negative Voltage Handling on HS (–14 V)
  • ±3-A peak output current
  • Absolute maximum boot voltage 120 V
  • Low current (7-µA) consumption when disabled
  • Integrated bootstrap diode
  • Functional Safety-Capable
  • AEC-Q100 qualified with following results
    • Temperature grade 1 (Tj = –40°C to 150°C)
    • HBM ESD classification level 1B
    • CDM ESD classification level C3
  • Drives two N-channel MOSFETs in high-side low-side configuration
  • 5-V typical under voltage lockout
  • Input interlock
  • Enable/disable functionality in DRC package
  • 16-ns typical propagation delay
  • 12-ns rise, 10-ns fall time with 1.8-nF load
  • 1-ns typical delay matching
  • Absolute Maximum Negative Voltage Handling on Inputs (–5 V)
  • Absolute Maximum Negative Voltage Handling on HS (–14 V)
  • ±3-A peak output current
  • Absolute maximum boot voltage 120 V
  • Low current (7-µA) consumption when disabled
  • Integrated bootstrap diode
  • Functional Safety-Capable

The UCC27282 -Q1 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27282 -Q1 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27282 -Q1 can be used in conjunction with both analog and digital controllers.

The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Input interlock further improves robustness and system reliability in high noise applications. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system. 5-V UVLO allows systems to operate at lower bias voltages, which is necessary in many high frequency applications and improves system efficiency in certain operating modes. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency.

Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27282 -Q1 is offered in a small package enabling high density designs.

The UCC27282 -Q1 is a robust N-channel MOSFET driver with a maximum switch node (HS) voltage rating of 100 V. It allows for two N-channel MOSFETs to be controlled in half-bridge or synchronous buck configuration based topologies. Its 3-A peak source and sink current along with low pull-up and pull-down resistance allows the UCC27282 -Q1 to drive large power MOSFETs with minimum switching losses during the transition of the MOSFET Miller plateau. Since the inputs are independent of the supply voltage, UCC27282 -Q1 can be used in conjunction with both analog and digital controllers.

The input pins as well as the HS pin are able to tolerate significant negative voltage, which improves system robustness. Input interlock further improves robustness and system reliability in high noise applications. The enable and disable functionality provides additional system flexibility by reducing power consumption by the driver and responds to fault events within the system. 5-V UVLO allows systems to operate at lower bias voltages, which is necessary in many high frequency applications and improves system efficiency in certain operating modes. Small propagation delay and delay matching specifications minimize the dead-time requirement which further improves efficiency.

Under voltage lockout (UVLO) is provided for both the high-side and low-side driver stages forcing the outputs low if the VDD voltage is below the specified threshold. An integrated bootstrap diode eliminates the need for an external discrete diode in many applications, which saves board space and reduces system cost. UCC27282 -Q1 is offered in a small package enabling high density designs.
filter 尋找其它 半橋式驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
UCC27284-Q1 現行 Automotive 120V 3A half-bridge gate driver with 5V UVLO and enable options Removes input interlock for topologies where overlapping outputs are wanted.
UCC27301A-Q1 現行 Automotive 120V 4.5A half-bridge driver with 8V UVLO, interlock, and enable options More recent pin-to-pin driver with 8V UVLO, higher drive current and similar electrical characteristics

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 19
類型 標題 日期
* Data sheet UCC27282-Q1Automotive 3-A 120-V Half-Bridge Driver with Cross Conduction Protection and Low Switching Losses datasheet (Rev. D) PDF | HTML 2022年 10月 10日
Application note Mapping Application Requirements with the 120V Halfbridge Gate Driver PDF | HTML 2025年 4月 4日
Application note Using Half-Bridge Gate Driver to Achieve 100% Duty Cycle for High Side FET PDF | HTML 2024年 3月 25日
Application note Challenges and Solutions for Half-Bridge Gate Drivers in Bidirectional DC-DC Converters PDF | HTML 2024年 1月 24日
Application note Bootstrap Circuitry Selection for Half Bridge Configurations (Rev. A) PDF | HTML 2023年 9月 8日
Functional safety information UCC27282-Q1 Functional Safety, FIT Rate, Failure Mode Distribution and Pin FMA (Rev. B) PDF | HTML 2022年 11月 14日
Application note Comparative Analysis of Two Different Methods for Gate-Drive Current Boosting (Rev. A) PDF | HTML 2022年 2月 17日
Application note Voltage Fed Full Bridge DC-DC & DC-AC Converter High-Freq Inverter Using C2000 (Rev. D) 2021年 4月 7日
Application note Understanding and comparing peak current capability of gate drivers PDF | HTML 2021年 3月 30日
Application note Implementing High-Side Switches Using Half-Bridge Gate Drivers for 48-V Battery. 2020年 5月 12日
Application brief External Gate Resistor Selection Guide (Rev. A) 2020年 2月 28日
Application brief Understanding Peak IOH and IOL Currents (Rev. A) 2020年 2月 28日
User guide UCC27282 Evaluation Module (Rev. A) 2020年 1月 6日
Application brief Small Price Competitive 100-V Driver for 48-V BLDC Motor Drives 2019年 10月 22日
Application note Maximizing DC/DC converter designs with UCC27282 2019年 1月 18日
Application note UCC27282 Improving motor drive system robustness 2019年 1月 11日
Application note PFC Design Choice for On Board Charger Designs 2018年 5月 24日
Application brief Reducing Switching Losses in On-Board Chargers for Electric Vehicles 2018年 3月 27日
Technical article 48V systems: Driving power MOSFETs efficiently and robustly PDF | HTML 2015年 10月 8日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

UCC27282EVM-335 — UCC27282 120V、3A、5V UVLO 高壓側低壓側閘極驅動器評估模組

UCC27282EVM-335 專為評估 UCC27282DRC 而設計，這是一款具備高源極和汲極峰值電流能力的 120V 半橋閘極驅動器。此 EVM 的目標是依照產品規格表參數評估驅動器 IC。EVM 也可當成驅動器 IC 元件選擇指南使用。EVM 可用於判斷對閘極驅動器性能的 PCB 佈線圖影響。
使用指南: PDF
TI.com 無法提供
模擬型號

UCC27282 PSpice Transient Model

SNVMBN3.ZIP (32 KB) - PSpice Model
下載
計算工具

SLURB12 — UCC272xx-UCC273xx Schematic Review Template

UCC272xx-UCC273xx Schematic Review Template
支援產品和硬體

支援產品和硬體

產品
半橋式驅動器
  • UCC27200 — 120V 3A half-bridge gate driver with 8V UVLO and CMOS inputs
  • UCC27200-Q1 — Automotive 120V 3A half-bridge gate driver with 8V UVLO and CMOS inputs
  • UCC27200A — 120V 3A half-bridge gate driver with 8V UVLO, negative voltage handling, and CMOS inputs
  • UCC27201 — 120V 3A half-bridge gate driver with 8V UVLO and TTL inputs
  • UCC27201A — 120V 3A half-bridge gate driver with 8V UVLO, negative voltage handling, and TTL inputs
  • UCC27201A-DIE — 120V 升壓 3A 峰值電流的高頻、高側/低側驅動器
  • UCC27201A-Q1 — 具有 8-V UVLO 和負電壓處理功能的汽車 3-A、120-V 半橋式閘極驅動器
  • UCC27210 — 具 8-V UVLO 和 CMOS 輸入的 4-A、120-V 半橋閘極驅動器
  • UCC27211 — 具 8-V UVLO 和 TTL 輸入的 4-A、120-V 半橋閘極驅動器
  • UCC27211A — 120V 4.5A half-bridge gate driver with 8V UVLO and negative voltage handling
  • UCC27211A-Q1 — 120V 4.5A half-bridge gate driver with 8V UVLO and negative voltage handling
  • UCC27212 — 具 5V UVLO 和負電壓處理功能的 4A 120V 半橋式閘極驅動器
  • UCC27212A-Q1 — 具有 5V UVLO 的車用 4A 120V 半橋閘極驅動器
  • UCC27282 — 120V 3A half-bridge gate driver with 5V UVLO, interlock, and enable options
  • UCC27282-Q1 — Automotive 120V 3A half-bridge gate driver with 5V UVLO, interlock, and enable options
  • UCC27284 — 120V 3A half-bridge gate driver with 5V UVLO and enable options
  • UCC27284-Q1 — Automotive 120V 3A half-bridge gate driver with 5V UVLO and enable options
  • UCC27288 — 120V 3A half-bridge gate driver with 8V UVLO and no internal bootstrap diode
  • UCC27289 — 120V 3A half-bridge gate driver with 8V UVLO and enable options
  • UCC27301A — 120V 4.5A half-bridge driver with 8V UVLO, interlock, and enable options
  • UCC27301A-Q1 — Automotive 120V 4.5A half-bridge driver with 8V UVLO, interlock, and enable options
  • UCC27302A — 120V 4.5A half-bridge driver with 5V UVLO, interlock, and enable options
  • UCC27302A-Q1 — Automotive 120V 4.5A half-bridge driver with 5V UVLO, interlock, and enable options
  • UCC27311A — 120V 4.5A half-bridge driver with 8V UVLO and enable options
  • UCC27311A-Q1 — Automotive 120V 4.5A half-bridge driver with 8V UVLO and enable options
下載
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
HSOIC (DDA) 8 Ultra Librarian
SOIC (D) 8 Ultra Librarian
VSON (DRC) 10 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片