首頁 電源管理 線性與低壓差 (LDO) 穩壓器

1.5 -7V 輸入、3 安培超低壓差穩壓器

TPS7H1101-SP 不建議用於新設計
此產品將繼續向現有客戶提供。新設計應考量替代產品。
open-in-new 比較替代產品
可直接投入的替代產品,相較於所比較的裝置,具備升級功能
TPS7H1101A-SP 現行 抗輻射 QMLV、1.5-V 至 7-V 輸入、3-A 低雜訊可調式低壓差 (LDO) 穩壓器 The TPS7H1101A-SP is an improved version of the TPS7H1101-SP allowing the use of the enable feature across the entire input voltage range.

產品詳細資料

Rating Space Vin (max) (V) 7 Vin (min) (V) 1.5 Iout (max) (A) 3 Output options Adjustable Output Vout (max) (V) 6.8 Vout (min) (V) 0.8 Noise (µVrms) 20.33 PSRR at 100 KHz (dB) 25 Iq (typ) (mA) 7 Features Enable, Foldback Overcurrent protection, Power good, Soft start Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 60 Operating temperature range (°C) -55 to 125
Rating Space Vin (max) (V) 7 Vin (min) (V) 1.5 Iout (max) (A) 3 Output options Adjustable Output Vout (max) (V) 6.8 Vout (min) (V) 0.8 Noise (µVrms) 20.33 PSRR at 100 KHz (dB) 25 Iq (typ) (mA) 7 Features Enable, Foldback Overcurrent protection, Power good, Soft start Load capacitance (min) (µF) 22 Regulated outputs (#) 1 Accuracy (%) 2 Dropout voltage (Vdo) (typ) (mV) 60 Operating temperature range (°C) -55 to 125
CFP (HKR) 16 105.6 mm² 11 x 9.6
  • 5962R13202:
    • Radiation Hardness Assurance (RHA) up to TID 100 krad (Si)
    • Total Ionizing Dose 100 krad (Si)
    • ELDRS-Free 100 krad (Si)
    • Dose Rate 10 mRAD (si)/s
    • Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
    • SEB and SEGR Immune to LET = 85 MeV-cm2/mg
    • SET/SEFI Onset Threshold > 40 MeV-cm2/mg, See Radiation Report for Details
      • Specifically Designed to Always Upset Low to Avoid Damage to Critical Downstream Component
    • SET/SEFI Cross-Section Plot, See Radiation Report for Details
  • Ultra-Low VIN Range: 1.5 V to 7 V
  • 3-A Maximum Output Current
  • Current Share/Parallel Operation to Provide up to 6-A Output Current
  • Stable With Ceramic Output Capacitor
  • ±2% Accuracy Over Line, Load, and Temperature
  • Programmable Soft-Start Through External Capacitor
  • Input Enable and Power-Good Output for Power Sequencing
  • Ultra-Low Dropout LDO Voltage: 62 mV at 1 A (25°C), VOUT = 1.8 V
  • Low Noise: 20.33 µVRMS VIN = 2 V, VOUT = 1.8 V at 3 A
  • PSRR: Over 45 dB at 1 kHz
  • Excellent Load/Line Transient Response
  • Foldback Current Limit
  • See the Tools & Software Tab
  • Thermally-Enhanced CFP Package (0.6°C/W RθJC)
  • 5962R13202:
    • Radiation Hardness Assurance (RHA) up to TID 100 krad (Si)
    • Total Ionizing Dose 100 krad (Si)
    • ELDRS-Free 100 krad (Si)
    • Dose Rate 10 mRAD (si)/s
    • Single Event Latchup (SEL) Immune to LET = 85 MeV-cm2/mg
    • SEB and SEGR Immune to LET = 85 MeV-cm2/mg
    • SET/SEFI Onset Threshold > 40 MeV-cm2/mg, See Radiation Report for Details
      • Specifically Designed to Always Upset Low to Avoid Damage to Critical Downstream Component
    • SET/SEFI Cross-Section Plot, See Radiation Report for Details
  • Ultra-Low VIN Range: 1.5 V to 7 V
  • 3-A Maximum Output Current
  • Current Share/Parallel Operation to Provide up to 6-A Output Current
  • Stable With Ceramic Output Capacitor
  • ±2% Accuracy Over Line, Load, and Temperature
  • Programmable Soft-Start Through External Capacitor
  • Input Enable and Power-Good Output for Power Sequencing
  • Ultra-Low Dropout LDO Voltage: 62 mV at 1 A (25°C), VOUT = 1.8 V
  • Low Noise: 20.33 µVRMS VIN = 2 V, VOUT = 1.8 V at 3 A
  • PSRR: Over 45 dB at 1 kHz
  • Excellent Load/Line Transient Response
  • Foldback Current Limit
  • See the Tools & Software Tab
  • Thermally-Enhanced CFP Package (0.6°C/W RθJC)

The TPS7H1101-SP is a radiation-hardened LDO linear regulator that uses a PMOS pass element configuration. This device operates over a wide range of input voltage, from 1.5 V to 7 V while offering excellent PSRR. The TPS7H1101-SP features a precise and programmable foldback current limit implementation with a very-wide adjustment range. To support the complex power requirements of FPGAs, DSPs, or microcontrollers, the TPS7H1101-SP provides enable on and off functionality, programmable SoftStart, current sharing capability, and a PowerGood open-drain output.

The TPS7H1101-SP is available in a thermally-enhanced 16-pin ceramic flatpack package (CFP).

The TPS7H1101-SP is a radiation-hardened LDO linear regulator that uses a PMOS pass element configuration. This device operates over a wide range of input voltage, from 1.5 V to 7 V while offering excellent PSRR. The TPS7H1101-SP features a precise and programmable foldback current limit implementation with a very-wide adjustment range. To support the complex power requirements of FPGAs, DSPs, or microcontrollers, the TPS7H1101-SP provides enable on and off functionality, programmable SoftStart, current sharing capability, and a PowerGood open-drain output.

The TPS7H1101-SP is available in a thermally-enhanced 16-pin ceramic flatpack package (CFP).

下載

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Radiation & reliability report TPS7H1101-SP Total Ionizing Dose (TID) 2022年 11月 4日
* Radiation & reliability report TPS7H1101-SP Neutron Displacement Damage Characterization Report 2017年 10月 23日
* Data sheet TPS7H1101-SP 1.5-V to 7-V Input, 3-A, Radiation-Hardened Ultra-Low Dropout (LDO) Regulator datasheet (Rev. A) PDF | HTML 2017年 2月 14日
* Radiation & reliability report TPS7H1101‐SP TID and SEE Report (Rev. A) 2015年 4月 27日

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點