TPS777
- Open Drain Power-On Reset With 200-ms Delay (TPS777xx)
- Open Drain Power Good (TPS778xx)
- 750-mA Low-Dropout Voltage Regulator
- Avilable in 1.5-V, 1.8-V, 2.5-V, 3.3-V Fixed Output and Adjustable Versions
- Dropout Voltage to 260 mV (Typ) at 750 mA (TPS77x33)
- Ultralow 85 µA Typical Quiescent Current
- Fast Transient Response
- 2% Tolerance Over Specified Conditions for Fixed-Output Versions
- 8-Pin SOIC and 20-Pin TSSOP PowerPAD™ (PWP) Package
- Thermal Shutdown Protection
All trademarks are the property of their respective owners.
TPS777xx and TPS778xx are designed to have a fast transient response and be stable with a 10-µF low ESR capacitors. This combination provides high performance at a reasonable cost.
Because the PMOS device behaves as a low-value resistor, the dropout voltage is very low (typically 260 mV at an output current of 750 mA for the TPS77x33) and is directly proportional to the output current. Additionally, since the PMOS pass element is a voltage-driven device, the quiescent current is very low and independent of output loading (typically 85 µA over the full range of output current, 0 mA to 750 mA). These two key specifications yield a significant improvement in operating life for battery-powered systems. This LDO family also features a sleep mode; applying a TTL high signal to EN\ (enable) shuts down the regulator, reducing the quiescent current to 1 µA at TJ = 25°C.
The RESET\ output of the TPS777xx initiates a reset in microcomputer and microprocessor systems in the event of an undervoltage condition. An internal comparator in the TPS777xx monitors the output voltage of the regulator to detect an undervoltage condition on the regulated output voltage.
Power good (PG) of the TPS778xx is an active high output, which can be used to implement a power-on reset or a low-battery indicator.
The TPS777xx and TPS778xx are offered in 1.5-V, 1.8-V, 2.5-V, and 3.3-V fixed-voltage versions and in an adjustable version (programmable over the range of 1.5 V to 5.5 V for TPS77701 option and 1.2 V to 5.5 V for TPS77801 option). Output voltage tolerance is specified as a maximum of 2% over line, load, and temperature ranges. The TPS777xx and TPS778xx families are available in 8 pin SOIC and 20 pin PWP packages.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS777/8xx: Fast-Transient-Response 750-mA LDO Voltage Regulators datasheet (Rev. G) | 2004/1/5 | |||
| 應用說明 | LDO Noise Demystified (Rev. B) | PDF | HTML | 2020/8/18 | |||
| 應用說明 | PowerPAD™ Thermally Enhanced Package (Rev. H) | 2018/7/6 | ||||
| 應用說明 | LDO PSRR Measurement Simplified (Rev. A) | PDF | HTML | 2017/8/9 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
TIDA-00111 — 具中等扭矩驅動的步進馬達系統
This bipolar stepper motor system implements an MSP430, a DRV8818, and a NEMA 23 motor. It's suitable for applications requiring up to 140 oz-in of torque, and up to 800 RPM. Motor voltage support is 8V to 35V, and max current is 2.5A. A multitude of configuration options allow (...)
TIDA-00144 — 車用 HVAC 阻尼器馬達控制
TIDA-00144 參考設計由一顆 1.6A 的雙全橋馬達驅動器以及少量外部元件所組成，可驅動最多兩顆有刷 DC 馬達，常見於車用 HVAC 阻尼馬達應用中。此設計具備關閉電池功能，最大運作供應電壓為 45V。另外提供內部關機功能，以提供過電流保護、短路保護、欠電壓鎖定和過熱保護。
TIDA-00145 — 適用於電動摺疊側視鏡的汽車有刷馬達驅動器
此參考設計配備兩個評估模組 (EVM)，提供易於使用的平台，以展示電動折疊側視鏡馬達驅動器的功能與性能。
此參考設計也可輕鬆評估全橋式有刷 DC 馬達驅動器，該驅動器可驅動車輛側視鏡的收折功能。憑藉過電流、過熱、擊穿、UVLO 和寬廣輸入電壓（寬 VIN）範圍等內建汽車保護功能，此馬達驅動器可提供承受嚴苛汽車環境所需的功能。
此外，此設計提供測試資料，讓您能快速評估 DRV8801-Q1 和 DRV8872-Q1 折疊後視鏡模組的性能。
TIDA-00146 — 車用適應性前燈定位步進馬達
此 TIDA-00146 參考設計提供整合式馬達驅動器解決方案，旨在驅動車用適應性前燈定位應用中的雙極步進馬達。此設計具備關閉電池功能，最大運作供應電壓為 45V。此外，內部提供關機功能以實現過電流保護、短路保護、欠電壓鎖定與過熱保護。此設計整合了 DRV8824EVM 電路板來建立解決方案。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOIC (D) | 8 | Ultra Librarian |
| HTSSOP (PWP) | 20 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。