首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器

TPS62843

現行

1.8V 至 5.5V 輸入,600mA 超低 IQ 降壓轉換器

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 0.6 Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 3.6 Vout (min) (V) 0.4 Features Enable, Light Load Efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface Control mode DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000000275 Duty cycle (max) (%) 100 Sector Wearables
Rating Catalog Topology Buck Iout (max) (A) 0.6 Vin (max) (V) 5.5 Vin (min) (V) 1.8 Vout (max) (V) 3.6 Vout (min) (V) 0.4 Features Enable, Light Load Efficiency, Output discharge, Over Current Protection, Soft Start Fixed, Synchronous Rectification, UVLO fixed, VID Interface Control mode DCS-Control Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.000000275 Duty cycle (max) (%) 100 Sector Wearables
SOT-5X3 (DRL) 6 2.56 mm² (1.6 mm × 1.6 mm) DSBGA (YKA) 6 0.735 mm² (1.05 mm × 0.7 mm)
  • 1.8V to 5.5V input voltage range
  • 0.4V to 3.6V output voltage range
  • 275nA typical quiescent current
  • 600mA output current
  • 1% output voltage accuracy
  • 4nA typical shutdown current
  • Output discharge
  • VSET pin-selectable output voltage through a single resistor
    • TPS628436: 0.4V to 0.8V
    • TPS628437: 0.8V to 1.8V
    • TPS628438: 1.8V to 3.6V
  • Designed for small passive components
    • 1µH inductor
    • Down to effective capacitance of 4µF COUT
  • High PSRR (up to 83dB)
  • Low output voltage ripple in power save mode
  • RF-friendly and fast transient DCS-Control
  • Automatic transition to no ripple 100% mode
  • 0603-inductor and 0402-capacitor size supported
  • Tiny 6-pin, 0.35mm pitch WCSP package with 0.84mm² size
  • Pin-to-pin compatible to the TPS6280x family (1A) in WCSP package
  • Available in a 1.60mm × 1.60mm SOT563 package
  • 1.8V to 5.5V input voltage range
  • 0.4V to 3.6V output voltage range
  • 275nA typical quiescent current
  • 600mA output current
  • 1% output voltage accuracy
  • 4nA typical shutdown current
  • Output discharge
  • VSET pin-selectable output voltage through a single resistor
    • TPS628436: 0.4V to 0.8V
    • TPS628437: 0.8V to 1.8V
    • TPS628438: 1.8V to 3.6V
  • Designed for small passive components
    • 1µH inductor
    • Down to effective capacitance of 4µF COUT
  • High PSRR (up to 83dB)
  • Low output voltage ripple in power save mode
  • RF-friendly and fast transient DCS-Control
  • Automatic transition to no ripple 100% mode
  • 0603-inductor and 0402-capacitor size supported
  • Tiny 6-pin, 0.35mm pitch WCSP package with 0.84mm² size
  • Pin-to-pin compatible to the TPS6280x family (1A) in WCSP package
  • Available in a 1.60mm × 1.60mm SOT563 package

The TPS62843 is a high-efficiency, step-down converter family with ultra-low operating quiescent current of typically 275nA. The device features a 4nA shutdown (typical) current when disabled.

The device uses DCS-Control with a low and RF-friendly output voltage ripple to power radios.

The device operates with a typical switching frequency of 1.5MHz and extends a high efficiency at light-load down to 100µA load current and below.

3 × 18 pre-defined output voltages can be selected by connecting a resistor to the VSET pin, making the family usable across various applications with a minimum set of passive components.

The TPS62843 is a high-efficiency, step-down converter family with ultra-low operating quiescent current of typically 275nA. The device features a 4nA shutdown (typical) current when disabled.

The device uses DCS-Control with a low and RF-friendly output voltage ripple to power radios.

The device operates with a typical switching frequency of 1.5MHz and extends a high efficiency at light-load down to 100µA load current and below.

3 × 18 pre-defined output voltages can be selected by connecting a resistor to the VSET pin, making the family usable across various applications with a minimum set of passive components.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPSM82843 現行 具有整合式電感器 275nA IQ、0.4V 至 3.6V 特定 VOUT、600mA 降壓轉換器模組 Module with integrated inductor
TPS62800 現行 採用 0.7 mm x 1.05 mm 晶片級封裝的 1.75 V 至 5.5 V 輸入、1 A 超低 IQ 降壓轉換器 Drop-in alternative with selectable power save and Forced-PWM mode and higher switching frequency
TPS62806 現行 採用 0.7mm x 1.05mm WCSP 的 1.75V 至 5.5V 輸入、600mA 超低 IQ 降壓轉換器 Drop-in alternative with selectable power save and forced-PWM mode

技術文件

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS628436-7-8EVM-167 — 適用於 DSBGA 封裝的 TPS62843 評估模組

TPS628436-7-8EVM-167 評估模組 (EVM) 有助於評估採用小型 1.05-mm x 0.8-mm WCSP 封裝、間距為 0.35mm 且 IQ 為 300-nA 的 TPS62843 系列 600-mA 降壓轉換器。EVM 包含三個獨立電路,可從 1.8 V 至 5.5 V 輸入電壓建立 0.4 V 至 3.6 V 輸出電壓。電路佔用 12.4-mm² 空間,最大高度為 1.0 mm。TPS628436-7-8 是高效率且精巧的解決方案,適合有限空間應用的負載點 (POL) 轉換器,例如穿戴式裝置和智慧型手機。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
開發板

TPS62843678EVM-030 — 適用於 SOT-563 封裝的 TPS62843 評估模組

TPS62843678EVM-030 採用 0.6mm 間距的 1.6mm × 1.6mm SOT-563 封裝,有助於評估具 275nA IQ 的 TPS62843 系列 600mA 降壓式轉換器。評估模組包含三個獨立電路,可從 1.8V 和 5.5V 之間的高輸入電壓建立介於 0.4V 和 3.6V 之間的輸出電壓。TPS62843x 是一款高效率且精巧的解決方案,適用於有限空間應用的負載點 (POL) 轉換器,例如穿戴式裝置、智慧型手機和工業設備。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS628436 PSpice Unencrypted Transient Model

SLVMDZ6.ZIP (271 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS628437 PSpice Unencrypted Transient Model

SLVMDZ5.ZIP (274 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS628438 PSpice Unencrypted Transient Model

SLVMDZ7.ZIP (276 KB) - PSpice 模型
支援產品和硬體
參考設計

TIDA-010280 — 小型、無線、6 引線 ECG Holter 監視器參考設計,具備呼吸、心律及溫度功能

這款穿戴式生物感測 Holter 監測器參考設計提供了一個評估平台,用於 TI 最新技術在持續監測生命體徵方面的相關應用,例如心電圖 (ECG)、心率、呼吸、心律脈搏、溫度和動作。此設計採用 AFE159RP4 實現低功率、高解析度且高度整合的 ECG 訊號擷取,最多可擷取 6 條引線 (4 通道),而 TMP119 則可進行體溫監控。測量的資料會由 CC2674R10 (支援 Bluetooth® 低功耗 5.3) 傳輸至遠端終端機,例如智慧型手機或醫療監控系統等,以實現即時顯示。板載發光二極體 (LED) 會指示系統狀態,例如引線脫落、低功率和 Bluetooth® (...)

支援產品和硬體
參考設計

TIDA-010288 — 啟用邊緣 AI 的無線 ECG Holter 監護儀參考設計,可進行即時心律失常分類

此邊緣人工智慧 (AI) 就緒穿戴式生物感測 Holter 參考設計為我們的最新產品提供了評估平台,此產品能持續監測生命徵象,例如心電圖 (ECG)、心率、呼吸、心律脈衝、體溫和活動。此設計採用 AFE159RP4 實現低功率、高解析度且高度整合的 ECG 訊號擷取,最多可擷取六條引線 (四通道),而 TMP119 則可進行體溫監控。測量資料由 MSPM0 MCU 處理並進行即時心律失常分類,然後由 CC2340R5 (支援 Bluetooth® 低耗能 (LE) 5.3) 傳輸至遠端終端,例如智慧型手機或醫療監控系統,以進行即時顯示。整個系統可由 2 顆 CR2032 電池 (3V 輸入) (...)
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 6 Ultra Librarian
DSBGA (YKA) 6 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片