TPS62743
- Input voltage range VIN from 2.15 V to 5.5 V
- Input voltage range down to 2.0 V once started
- output current
- TPS62743 300 mA
- TPS627431 400 mA
- 360-nA operational quiescent current
- Up to 90% efficiency at 10-µA output current
- Power save mode operation
- Selectable output voltages
- Eight voltage options between 1.2 V to 3.3 V
- Output voltage discharge
- Low output voltage ripple
- Automatic transition to no ripple 100% mode
- RF friendly DCS-Control™
- Total solution size < 10 mm2
- Small 1.6-mm × 0.9-mm, 8-ball WCSP package
The TPS62743 is a high efficiency step down converter with ultra low quiescent current of typical 360 nA. The device is optimized to operate with a 2.2-µH inductor and 10µF output capacitor. The device uses DCS-Control™ and operates with a typical switching frequency of 1.2 MHz. In Power Save Mode the device extends the light load efficiency down to a load current range of 10-µA and below. TPS62743 provides an output current of 300 mA. Once started the device operates down to an input voltage range of 2.0 V. This allows to operate the device directly from a single Li-MnO2 coin cell.
The TPS62743 provides 8 programmable output voltages between 1.2V and 3.3V selectable by three selection pins. The TPS62743 is optimized to provide a low output voltage ripple and low noise using a small output capacitor. Once the input voltage comes close to the output voltage the device enters the No Ripple 100% mode to prevent an increase of output ripple voltage. In this operation mode the device stops switching and turns the high side MOSFET switch on.
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS62743EVM-689 — TPS62743 超低 Iq 降壓轉換器評估模組
TPS62743EVM-689 旨在協助使用者輕鬆評估和測試 TPS62743 的運作和功能。EVM 將 2.0V 至 5.5V 輸入電壓轉換為穩壓輸出,輸出電壓可設定在 1.2V 和 3.3V 之間,最高可達 300mA。TPS62743 為小型 1.6 x 0.9mm² WCSP 封裝。其具有 360nA 的超低靜態電流。
PMP11311 — 採用 bq51003 和 bq25120 進行無線充電的穿戴式裝置電源參考設計
穿戴式裝置需要先進的電源管理,以延長電池運作時間且提供常開功能。 此外,裝置需要使用小型可充電電池,並實現小體積設計。 此應用說明展示了針對穿戴式裝置的可擴充電源管理解決方案的實作情形,可針對活動監控器或智慧手錶量身打造。此設計提供無線充電輸入、可高度配置的電池管理解決方案,搭載鋰離子電池充電器和低靜態電流 (Iq) DC/DC 降壓;適用於 PMOLED 顯示的升壓轉換器;適用於心率監測器 (HRM) 的升壓轉換器,以及第二個可配置低 Iq DC/DC 降壓轉換器。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| DSBGA (YFP) | 8 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。