TPS562202
- 2-A converter with integrated 140-mΩ and 84-mΩ FETs
- D-CAP2™ mode control with fast transient response
- Input voltage range: 4.3 V to 17 V
- Output voltage range: 0.804 V to 7 V
- ECO mode at light loading
- 580-kHz switching frequency
- Low shutdown current of less than 3 µA
- 2% feedback voltage accuracy (25°C)
- Support pre-bias start-up
- Cycle-by-cycle overcurrent limit
- Hiccup-mode overcurrent protection
- Non-latch UVP and TSD protections
- Fixed soft start: 1.2 ms
The TPS562202 is a simple, easy-to-use, 2-A synchronous buck converter in a SOT563 package.
The device is optimized to operate with minimum external components and also optimized to achieve low standby current.
This switch mode power supply (SMPS) device employs D-CAP2 mode control providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.
The TPS562202 operates in ECO mode, which maintains high efficiency during light load operation. The TPS562202 is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS562202 4.3-V to 17-V Input, 2-A Synchronous Buck Converter in SOT563 datasheet | PDF | HTML | 2020/9/18 | ||
| 應用說明 | How to Co-Layout Three Common SOT-563 Package Pinouts (Rev. B) | PDF | HTML | 2024/8/27 | |||
| 應用說明 | How to Understand LC Table and Select LC About TPS563202 | PDF | HTML | 2021/5/17 | |||
| 證書 | TPS562202EVM EU Declaration of Conformity (DoC) | 2020/5/14 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS562202EVM — 4.5-V 至 17-V、2-A 同步降壓轉換器評估模組
TIDA-010231 — 適合光電應用、適用於電弧偵測的類比前端參考設計
此參考設計在光伏系統中實作四通道類比前端進行 DC 電弧偵測,支援高達 tp 1000 V 的 DC 電壓及高達 10 A 的電流。透過分析太陽能面板和逆變器間 DC 電流的 AC 雜訊,即可偵測電弧。在使用 C2000 即時微控制器 (MCU) 完成頻率分析前,訊號會由條件為類比濾波器階段的電流變壓器擷取,並由 16 位元 ADC ADC8363 取樣。此設計相容於不同 C2000 controlCARD,可將 MCU 調整至系統。可以使用 ADS8363 的旁路選項來評估 C2000™MCU 的內部 ADC。C2000 軟體套件可在最新 (...)
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。