首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

TPS562211

現行

採用 SOT583，具 1% 準確度、PG/SS 和 PFM/強制 PWM 的 4.2-V 至 18-V、2-A、同步降壓轉換器

立即訂購
產品規格表

TPS562211

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 18 Vin (min) (V) 4.2 Vout (max) (V) 7 Vout (min) (V) 0.6 Features Enable, Forced PWM, Light Load Efficiency, Power good, Soft Start Adjustable, UVLO Fixed Control mode ACM/AECM Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00012 Duty cycle (max) (%) 98
Rating Catalog Topology Buck Iout (max) (A) 2 Vin (max) (V) 18 Vin (min) (V) 4.2 Vout (max) (V) 7 Vout (min) (V) 0.6 Features Enable, Forced PWM, Light Load Efficiency, Power good, Soft Start Adjustable, UVLO Fixed Control mode ACM/AECM Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.00012 Duty cycle (max) (%) 98
SOT-5X3 (DRL) 8 3.36 mm² (2.1 mm × 1.6 mm)
  • Input voltage: 4.2 V to 18 V
  • Output voltage: 0.6 V to 7 V
    • Up to 2-A continuous output current
    • Minimum switching on time: 45 ns
    • Maximum duty cycle: 98%
  • High efficiency
    • Integrated 66-mΩ and 33-mΩ MOSFETs
    • Quiescent current 120-µA typical
  • Highly flexible and easy to use
    • Selectable Eco-mode or FCCM operation
    • Selectable power good indicator or external soft start
    • Precise enable input
  • High accuracy
    • Reference voltage accuracy: ±1% (25°C)
    • Switching frequency tolerance: ±8.5%
  • Small solution size
    • Internal compensation for ease of use
    • SOT583 package
    • Minimum external components
  • Cycle-by-cycle current limit for both high-side and low-side MOSFETs
  • Non-latched OVP, UVP, UVLO, and TSD protections
  • Create a custom design using TPS562211 with the WEBENCH® Power Designer
  • Input voltage: 4.2 V to 18 V
  • Output voltage: 0.6 V to 7 V
    • Up to 2-A continuous output current
    • Minimum switching on time: 45 ns
    • Maximum duty cycle: 98%
  • High efficiency
    • Integrated 66-mΩ and 33-mΩ MOSFETs
    • Quiescent current 120-µA typical
  • Highly flexible and easy to use
    • Selectable Eco-mode or FCCM operation
    • Selectable power good indicator or external soft start
    • Precise enable input
  • High accuracy
    • Reference voltage accuracy: ±1% (25°C)
    • Switching frequency tolerance: ±8.5%
  • Small solution size
    • Internal compensation for ease of use
    • SOT583 package
    • Minimum external components
  • Cycle-by-cycle current limit for both high-side and low-side MOSFETs
  • Non-latched OVP, UVP, UVLO, and TSD protections
  • Create a custom design using TPS562211 with the WEBENCH® Power Designer

The TPS562211 is a cost effective and highly flexible synchronous buck converter that provides selectable Eco-mode operation or FCCM (Force Continuous Conduction Mode) operation. A selectable Power-Good indicator or external soft start is also configurable through the MODE pin. Power sequencing is possible by correctly configuring Enable, Power-Good indicator, or external soft start. A wide input voltage range of 4.2 V to 18 V supports a wide variety of common input rails like 12 V and 15 V. It supports up to 2-A continuous output current at output voltages between 0.6 V and 7 V.

The device provides fast transient response with true fixed switching frequency through the use of the Advanced Emulated Current Mode (AECM) control topology. With internal smart loop bandwidth control, the device provides fast transient response over a wide output voltage range without the need for external compensation.

Cycle-by-cycle current limit on the high-side peak current protects the device in overload situations and is enhanced by a low-side valley current limit, which prevents current runaway. Hiccup mode would be triggered under overvoltage protection (OVP), undervoltage protection (UVP), UVLO protection, and thermal shutdown.

The device is available in 1.6-mm × 2.1-mm SOT583 package.

The TPS562211 is a cost effective and highly flexible synchronous buck converter that provides selectable Eco-mode operation or FCCM (Force Continuous Conduction Mode) operation. A selectable Power-Good indicator or external soft start is also configurable through the MODE pin. Power sequencing is possible by correctly configuring Enable, Power-Good indicator, or external soft start. A wide input voltage range of 4.2 V to 18 V supports a wide variety of common input rails like 12 V and 15 V. It supports up to 2-A continuous output current at output voltages between 0.6 V and 7 V.

The device provides fast transient response with true fixed switching frequency through the use of the Advanced Emulated Current Mode (AECM) control topology. With internal smart loop bandwidth control, the device provides fast transient response over a wide output voltage range without the need for external compensation.

Cycle-by-cycle current limit on the high-side peak current protects the device in overload situations and is enhanced by a low-side valley current limit, which prevents current runaway. Hiccup mode would be triggered under overvoltage protection (OVP), undervoltage protection (UVP), UVLO protection, and thermal shutdown.

The device is available in 1.6-mm × 2.1-mm SOT583 package.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TPS562212 現行 採用節能模式及可選 FCCM 的 4.2-V 至 18-V、2-A、1.2-MHz 同步降壓轉換器 Pin compatible with high switching frequency.
功能相似於所比較的產品。
TPS562203 現行 具節能模式且採用 SOT563 的 4.2-V 至 17-V 輸入、2-A 同步降壓轉換器 Lower standy current and less exernal compnents needed

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TPS562211 4.2-V to 18-V Input, 2-A Synchronous Buck Converter in SOT583 Package datasheet (Rev. A) PDF | HTML 2021/8/20
應用說明 Transient Response Comparison of AECM with D-CAP2 and PCM Control PDF | HTML 2022/12/21
白皮書 Achieving Fast Load-Transient Response and Low EMI with the AECM DC/DC Control (Rev. A) PDF | HTML 2022/10/24
Application brief Benefit from Highly Flexible and Easy to Use DC/DC Solution PDF | HTML 2022/1/24
證書 TPS562211EVM EU Declaration of Conformity (DoC) 2020/7/29

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TPS562211EVM — 18-V 輸入、2-A 輸出、600-kHz 同步降壓轉換器 SOT583 評估模組

TPS562211 是一款採用 SOT583 封裝，且可選擇 Eco 模式和 FCCM 的簡單易用的 2-A 同步降壓轉換器。TPS562211EVM 是完全組裝且經過測試的電路板，可用於評估 TPS562211 降壓轉換器。TPS562211EVM 可在 4.2V 至 18V 輸入（12V 額定值）範圍內運作，並在 2A 時提供 3.3V 輸出。其也包含用於回饋迴路測量的 AC 訊號注入端子。
使用指南: PDF | HTML
支援產品和硬體
有庫存
限制：
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TPS562211 PSpice Unencrypted Transient Model

SLUM792.ZIP (334 KB) - PSpice 模型
支援產品和硬體
模擬型號

TPS563211 PSpice Unencrypted Transient Model

SLUM791.ZIP (325 KB) - PSpice 模型
支援產品和硬體
參考設計

PMP41017 — 採用 GaN 和 C2000™ MCU 的 3kW 雙相交錯半橋 LLC 參考設計

此參考設計是使用 LMG3422 及 F280039C 裝置的 3-kW、雙相、交錯式半橋電感器-電感器-電容器 (LLC)。此設計可達到 98.1% 峰值效率與 313 W/in³ 功率密度，可做為常用備援電源供應器 (CRPS) 伺服器電源供應器的輸出階段，可用於評估兩個並聯 LLC 階段的控制方法，例如交叉與電流平衡。

支援產品和硬體
參考設計

PMP41037 — 具有 GaN 和 C2000 的 1kW、800V 至 12V 序列半橋雙向 DCX 參考設計

此參考設計為 1kW 雙向 DC 變壓器 (DCX)，可以隔離方式將 800V DC 匯流排轉換至 12V。此設計由 F280039C 控制，並持續以諧振腔的諧振頻率運作。一次側使用 LMG3622 GaN 序列半橋來處理最高 900V 的 DC 電壓。序列半橋 (SHB) 可修改為全橋，並將高壓側從 800V 變更為 400V。序列半橋可實現各種 PWM 策略，並且可控制彈性。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOT-5X3 (DRL) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片