TPS55340-EP
- Internal 5-A, 40-V low-side MOSFET switch
- 2.9-V to 32-V input voltage range
- ±0.7% reference voltage
- 0.5-mA operating quiescent current
- 2.7-µA shutdown supply current
- Fixed frequency current mode PWM vontrol
- Frequency adjustable from 100 kHz to 1.2 MHz
- Synchronization capability to external clock
- Adjustable soft-start time
- Pulse-skipping for higher efficiency at light loads
- Cycle-by-cycle current limit, thermal shutdown, and UVLO protection
- Supports defense, aerospace, and medical
applications
- Controlled baseline
- One assembly and test site
- One fabrication site
- Available in military (–55°C to 125°C) temperature range
- Extended product life cycle
- Extended product-change notification
- Product traceability
The TPS55340-EP is a monolithic, non-synchronous switching regulator with integrated 5-A, 40-V power switch. It can be configured in several standard switching-regulator topologies, including boost, SEPIC and isolated flyback. The device has a wide input voltage range to support applications with input voltage from multi-cell batteries or regulated 3.3-, 5-, 12-, and 24-V power rails.
The TPS55340-EP regulates the output voltage with current mode pulse width modulation (PWM) control, and has an internal oscillator. The switching frequency of PWM is set by either an external resistor or by synchronizing to an external clock signal. The user can program the switching frequency from 100 kHz to 1.2 MHz.
The device features a programmable soft-start function to limit inrush current during start-up and has other built-in protection features including cycle-by-cycle over current limit and thermal shutdown.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TPS55340-EP Integrated 5-A, 40-V Wide Input Range Boost/SEPIC/Flyback DC-DC Regulator datasheet (Rev. A) | PDF | HTML | 2021/9/15 | ||
| * | VID | TPS55340-EP VID V6214611 | 2016/6/21 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TPS55340EVM-017 — 適用於 TPS55340 5A、40V 電流模式整合式 FET DC 轉換器的升壓評估模組
TPS55340EVM-147 — 適用於 TPS55340 5A、40V 電流模式整合式 FET DC 轉換器的 SEPIC 評估模組
TPS55340EVM-148 — 適用於 TPS55340 5A、40V 電流模式整合式 FET DC 轉換器的隔離返馳拓撲模組
FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator
此工具協助電源供應工程師根據規格選擇正確的隔離式 DC-DC 拓撲結構。根據選擇的拓撲結構,計算機還會推薦適合設計的 IC。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| WQFN (RTE) | 16 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。