產品詳細資料

Local sensor accuracy (max) 0.2, 0.3 Type Local Operating temperature range (°C) -55 to 150 Interface type Single-Wire Features 2-kb EEPROM, 64-bit unique ID, ALERT, GPIO, NIST traceable Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
Local sensor accuracy (max) 0.2, 0.3 Type Local Operating temperature range (°C) -55 to 150 Interface type Single-Wire Features 2-kb EEPROM, 64-bit unique ID, ALERT, GPIO, NIST traceable Supply current (max) (µA) 154 Temp resolution (max) (bps) 16 Remote channels (#) 0 Addresses 256 Rating Catalog TI functional safety category Functional Safety-Capable
WSON (NGR) 8 6.25 mm² (2.5 mm × 2.5 mm) VSSOP (DGK) 8 14.7 mm² (3 mm × 4.9 mm)
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor (WSON package)
    • ±0.2°C (maximum) from +10°C to +45°C
    • ±0.3°C (maximum) from –40°C to +105°C
    • ±0.4°C (maximum) from –55°C to +150°C
  • High-accuracy digital temperature sensor (VSSOP package)
    • ±0.3°C (maximum) from –20°C to +85°C
    • ±0.5°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert
  • 1-Wire interface with multi-drop shared bus and cyclic redundancy check (CRC)
  • Bus powered with operating voltage: 1.7V to 5.5V
  • IEC 61000-4-2 ESD for 8-kV contact discharge
  • Functional Safety-Capable
  • High-accuracy digital temperature sensor (WSON package)
    • ±0.2°C (maximum) from +10°C to +45°C
    • ±0.3°C (maximum) from –40°C to +105°C
    • ±0.4°C (maximum) from –55°C to +150°C
  • High-accuracy digital temperature sensor (VSSOP package)
    • ±0.3°C (maximum) from –20°C to +85°C
    • ±0.5°C (maximum) from –55°C to +150°C
  • Temperature measurement current: 94µA
  • Shutdown current: 1.3µA
  • 16-bit temperature resolution: 7.8125 m°C (1 LSB)
  • Fast data rates of 90kbps in overdrive speed
  • Flexible user programmable short address modes for faster device address
  • 2Kb EEPROM features:
    • Write operation in 64-bit block size
    • Continuous read mode
    • Read with write protection with 256-bit page size
    • Programming current: 178µA
  • NIST traceable factory-programmed non erasable 64-bit identification number for device addressing
  • Four configurable open-drain digital input-output and temperature alert

The TMP1826 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM and a wide operating temperature range from –55°C to +150°C. The TMP1826 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1826 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1826 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

The TMP1826 is a high-accuracy, 1-Wire® compatible digital output temperature sensor with integrated 2Kb EEPROM and a wide operating temperature range from –55°C to +150°C. The TMP1826 provides a high accuracy of ±0.1°C (typical)/±0.2°C (maximum) across the temperature range of +10°C to +45°C. Each device comes with a factory programmed 64-bit unique identification number for addressing and NIST traceability. The TMP1826 supports both standard speed for legacy application and overdrive mode with 90-kbps data rate for low latency communication across a wide voltage range of 1.7V to 5.5V.

In the simplest mode of operation, the TMP1826 1-Wire® interface, with an integrated 8kV IEC-61000-4-2 ESD protection on the data pin, requires only a single connection and a ground return in bus powered mode, which simplifies and reduces cost by reducing the number of wires and external protection components. Additionally, there is the VDD power pin also available for applications that need to have a dedicated power supply.

1-Wire® is a registered trademark of Maxim Integrated Products, Inc.

下載 觀看有字幕稿的影片 影片

索取更多資訊

提供 NIST 校準文件。立即索取

您可能會感興趣的類似產品

open-in-new 比較替代產品
針腳對針腳的功能與所比較的裝置相同。
TMP1827 現行 SHA-256 驗證器和 2Kbit EEPROM,整合式 ±0.2°C 溫度感測器與 1-Wire® 通訊協定相容 Pin-to-pin, same accuracy temperature sensor, with 2-kbit EEPROM and SHA-256-HMAC authentication
功能相似於所比較的產品。
TMP107 現行 具有菊輪鍊 UART、EEPROM 與警示功能的 ±0.4°C 溫度感測器 UART daisy chain with 0.4°C accuracy
TMP117 現行 0.1°C 數位溫度感測器、48 位元 EEPROM、PT100/PT1000 RTD 替代品 I²C bus with 0.1°C accuracy
LMT01 現行 具有脈衝串介面的 0.5°C 準確 2 接腳溫度感測器 Pulse train, two-pin through hole or surface mount with 0.5°C accuracy

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 13
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TMP1826 2-Kbit EEPROM, With Integrated ±0.2°C Temperature Sensor, Compatible With 1-Wire® Protocol datasheet (Rev. D) PDF | HTML 2025/1/17
應用說明 A Simple, Java-Based CRC Calculator PDF | HTML 2026/3/4
功能安全資訊 TMP1826 Functional Safety FIT Rate, FMD and Pin FMA (Rev. B) PDF | HTML 2025/7/18
Product overview NIST Traceability for Temperature and Humidity Sensors PDF | HTML 2025/4/15
應用說明 How to Read and Interpret Digital Temperature Sensor Output Data (Rev. A) PDF | HTML 2025/1/21
應用說明 Implementing Enumeration for 1-Wire® Protocol with TMP1826 and TM4C129x Microcontrollers (Rev. E) PDF | HTML 2025/1/21
Application brief Replace External Memory for Module Identification With TMP1826 Embedded EEPROM (Rev. A) PDF | HTML 2025/1/21
應用說明 Implementing Host Controller for TMP1826 & TMP1827 Single-Wire Temp. Sensor PDF | HTML 2022/11/3
技術文章 3 tips to optimize data reliability with sensors in real-time control systems PDF | HTML 2022/8/9
應用說明 RTD Alternative Measurement Methods in Real-Time Control Applications (Rev. A) PDF | HTML 2022/6/17
技術文章 How accurate sensing in HVAC systems improves efficiency and saves consumers money PDF | HTML 2021/1/26
技術文章 Interface to sensors in seconds with ASC Studio PDF | HTML 2020/11/12
技術文章 Getting the most out of your power stage at the full temperature range – part 2 PDF | HTML 2019/9/12

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TMP1827EVM — 適用於單線數位溫度感測器的 TMP1827 評估模組

TMP1827 為具有含雜湊訊息認證編碼 (HMAC) 和 2-Kbit EEPROM 之整合式安全雜湊演算法 (SHA) 256 位元的高準確度單線相容數位輸出溫度感測器。TMP1827 在 -55°C 至 150°C 的溫度範圍中可提供 ±0.3°C 的高準確度

TMP1827EVM 旨在提供快速設定以評估 TMP182x,並深入熟悉產品至各位元暫存器等級。印刷電路板 (PCB) 穿孔也可讓使用者將 TMP1827 與 USB 介面分離。

使用指南: PDF | HTML
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WSON (NGR) 8 Ultra Librarian
VSSOP (DGK) 8 Ultra Librarian

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片系列

觀看所有影片

影片