TMP112
- TMP112A accuracy without calibration:
- ±0.5°C (maximum) from 0°C to +65°C (3.3V)
- ±1.0°C (maximum) from –40°C to +125°C
- TMP112B accuracy without calibration:
- ±0.5°C (maximum) from 0°C to +65°C (1.8V)
- ±1.0°C (maximum) from –40°C to +125°C
- TMP112N accuracy without calibration:
- ±1.0°C (maximum) from –40°C to +125°C
- TMP112Dx accuracy without calibration:
- ±0.5°C (maximum) from -25°C to 85°C (V+ ≥ 1.5V)
- ±1.0°C (maximum) from –40°C to 125°C
- SOT563 package (1.6mm × 1.6mm)
- X2SON package (0.8mm × 0.8mm)
- Low quiescent current:
- 7.5-µA active (maximum), 0.35-µA shutdown (maximum)
- Supply range: 1.4V to 3.6V
- Resolution: 12 Bits
- Digital output: SMBus™, Two-Wire, and I2C interface compatibility
- NIST traceable
索取更多資訊
提供 NIST 校準文件。立即索取
您可能會感興趣的類似產品
針腳對針腳的功能與所比較的裝置相同。
功能相同,但針腳輸出與所比較的裝置不同。
技術文件
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
AWR2243-2X-CAS-EVM — 適用於汽車 4D 成像雷達的雙裝置 mmWave 串連評估模組
AWR2944EVM — 適用車用第二代、76-GHz 至 81-GHz 高效能 SoC 的 AWR2944 評估模組
AWR2944 評估模組 (EVM) 是一款易於使用的平台,可評估 AWR2944 mmWave 晶片系統 (SoC) 雷達感測器,可與 DCA1000EVM (另售) 直接連線。
AWR2944EVM 套件包含開始為晶片內建 C66x 數位訊號處理器 (DSP)、Arm® Cortex®-R5F 控制器和硬體加速器 (HWA 2.0) 開發軟體的一切所需。
此外也包含適用編程和偵錯的板載模擬,以及板載按鈕和 LED,以快速整合簡單的使用者介面。
AWR2E44PEVM — AWR2E44P 評估模組
DIP-ADAPTER-EVM — DIP 轉接器評估模組
Speed up your op amp prototyping and testing with the DIP-Adapter-EVM, which provides a fast, easy and inexpensive way to interface with small, surface-mount ICs. You can connect any supported op amp using the included Samtec terminal strips or wire them directly to existing circuits.
The (...)
NFC-DATALOGGER-EVM — 具有 NFC 介面的超低功耗多感測器資料記錄器評估模組
此 NFC-DATALOGGER-EVM 提供完整的參考設計,適用於資產追蹤和冷鏈資料記錄,具備超過 5 年的電池壽命,並透過簡單的 (...)
TMP112EVM — TMP112 高精密度、低功耗、數位溫度感測器評估模組
TMP112EVM 讓使用者可評估 TMP112 數位溫度感測器的性能。評估模組 (EVM) 採用 USB 隨身碟型式,配備板載 MSP430F5528 微控制器與使用 I²C 介面的主機和 TMP112 裝置連接。模組在 EVM 電路板上感測器與主機控制器間設計穿孔。穿孔允許使用者中斷 TMP112 的連接,以靈活地進行評估。
ADTEC-3P-STRESSSENSOR — 搭載 DRV425 的 AD-TEC 鋼材專用主動式磁致伸縮應力感測器
ASC-STUDIO-TMP112 — ASC studio for configuring all aspects of the TMP112 temperature sensor
SBOC486 — TMP102 Arduino Example Code v1.0
LM75SW-LINUX — 適用於 I2C 溫度感測器的 Linux 驅動程式
The Linux driver support LM75 compatible Temperature Sensors. The Linux driver supports communication through the I2C bus and interfaces with the Hardware Monitoring sub-system.
Linux Mainline StatusAvailable in Linux Main line: Yes
Available through git.ti.com: N/A
- LM75A
- TMP100
- TMP101
- (...)
許多 TI 參考設計包含 TMP112
使用我們的參考設計選擇工具,以檢視並找出最適合您的應用和參數的設計。
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-5X3 (DRL) | 6 | Ultra Librarian |