TLV742P

現行

200mA、低 IQ 低壓差 (LDO) 電壓穩壓器

產品詳細資料

Rating Catalog Vin (max) (V) 5.5 Vin (min) (V) 2 Iout (max) (A) 0.2 Output options Fixed Output Vout (max) (V) 5 Vout (min) (V) 0.85 Fixed output options (V) 1.1, 1.2, 1.5, 1.8, 2.5, 2.7, 2.8, 2.9, 3, 3.3 Noise (µVrms) 45 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 0.025 Features Enable, Output discharge Thermal resistance θJA (°C/W) 180.4 Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
Rating Catalog Vin (max) (V) 5.5 Vin (min) (V) 2 Iout (max) (A) 0.2 Output options Fixed Output Vout (max) (V) 5 Vout (min) (V) 0.85 Fixed output options (V) 1.1, 1.2, 1.5, 1.8, 2.5, 2.7, 2.8, 2.9, 3, 3.3 Noise (µVrms) 45 PSRR at 100 KHz (dB) 40 Iq (typ) (mA) 0.025 Features Enable, Output discharge Thermal resistance θJA (°C/W) 180.4 Load capacitance (min) (µF) 0.1 Regulated outputs (#) 1 Accuracy (%) 1.5 Dropout voltage (Vdo) (typ) (mV) 250 Operating temperature range (°C) -40 to 125
X2SON (DQN) 4 1 mm² (1 mm × 1 mm)
  • Input Voltage Range From 2 V to 5.5 V
  • Fixed-Output Voltage Combinations Possible From 0.85 V to 5 V in 50-mV Steps(1)
  • 0.5% Typical Accuracy
  • High PSRR:
    • 55 dB at 1 MHz
  • IQ When Enabled: 25 µA
  • IQ When Disabled: 1 µA
  • Active Output Discharge
  • Thermal Shutdown and Overcurrent Protection
  • Package:
    • 1-mm × 1-mm DQN (X2SON)
  • Input Voltage Range From 2 V to 5.5 V
  • Fixed-Output Voltage Combinations Possible From 0.85 V to 5 V in 50-mV Steps(1)
  • 0.5% Typical Accuracy
  • High PSRR:
    • 55 dB at 1 MHz
  • IQ When Enabled: 25 µA
  • IQ When Disabled: 1 µA
  • Active Output Discharge
  • Thermal Shutdown and Overcurrent Protection
  • Package:
    • 1-mm × 1-mm DQN (X2SON)

The TLV742P series of low-dropout linear voltage regulators (LDOs) are optimized to providing excellent performance by supporting a wide output voltage range. The LDOs can directly regulate a single cell Li-ion battery input-to-output voltage as low as 0.85 V.  If used to post-regulate a DC-DC converter output, the high PSRR of 55 dB at 1 MHz suppresses ripple to provide a stable low-noise, well-regulated VOUT.

The TLV742P has an active output discharge feature that helps ensure the output is kept low while the system is disabled, in standby mode, or in sleep mode.  Additionally, overcurrent protection is present to protect the device in the event of an output short along with thermal shutdown to prevent overheating.

The TLV742P series of voltage regulators are available in a 1 mm × 1 mm X2SON package to minimize PCB area.

The TLV742P series of low-dropout linear voltage regulators (LDOs) are optimized to providing excellent performance by supporting a wide output voltage range. The LDOs can directly regulate a single cell Li-ion battery input-to-output voltage as low as 0.85 V.  If used to post-regulate a DC-DC converter output, the high PSRR of 55 dB at 1 MHz suppresses ripple to provide a stable low-noise, well-regulated VOUT.

The TLV742P has an active output discharge feature that helps ensure the output is kept low while the system is disabled, in standby mode, or in sleep mode.  Additionally, overcurrent protection is present to protect the device in the event of an output short along with thermal shutdown to prevent overheating.

The TLV742P series of voltage regulators are available in a 1 mm × 1 mm X2SON package to minimize PCB area.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
具備升級功能,可直接投入使用替代所比較的裝置。
TLV773 現行 具啟用功能的 300mA 高 PSRR 低 IQ 低壓降穩壓器 General purpose LDO with higher PSRR
TLV707P 現行 具主動輸出放電和啓用功能的 200-mA 低 IQ, 低壓降電壓穩壓器 Previous generation of this device that is pin-to-pin
功能相同,但針腳輸出與所比較的裝置不同。
TLV700 現行 具啟用功能的 200-mA 高 PSRR 低 IQ 低壓降電壓穩壓器 Similar device with better PSRR performance in other packages

技術文件

找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TLV742P 200-mA, Small Size, Low-Dropout Linear Voltage Regulator datasheet PDF | HTML 2017/9/14
選擇指南 Low Dropout Regulators Quick Reference Guide (Rev. P) 2018/3/21

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

TLV70728EVM-612 — TLV70728 200mA 低 IQ 低壓差 (LDO) 穩壓器評估模組

The TLV70728EVM-612 is a fully assembled and tested circuit for evaluating the TLV70728 200mA, Low IQ, Low Dropout Regulator for Portables. The TLV70728EVM-612 provides a single 2.8V regulated output.
使用指南: PDF
支援產品和硬體
有庫存
限制:
??asset.out-of-stock-ti_zh_TW??
無法提供
模擬型號

TLV74211P PSpice Transient Model (Rev. A)

SBVM747A.ZIP (64 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74211P Unencrypted PSpice Transient Model

SBVM748.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74212P Unencrypted PSpice Transient Model

SBVM750.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74215P PSpice Transient Model

SBVM744.ZIP (64 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74215P Unencrypted PSpice Transient Model

SBVM746.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74218P PSpice Transient Model

SBVM745.ZIP (67 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74218P Unencrypted PSpice Transient Model

SBVM742.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74225P PSpice Transient Model

SBVM818.ZIP (65 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74225P Unencrypted PSpice Transient Model

SBVM817.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74227P PSpice Transient Model

SBVM743.ZIP (64 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74227P Unencrypted PSpice Transient Model

SBVM739.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74228P PSpice Transient Model (Rev. A)

SBVM737A.ZIP (64 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74228P Unencrypted PSpice Transient Model

SBVM738.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74229P PSpice Transient Model

SBVM740.ZIP (64 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74229P Unencrypted PSpice Transient Model

SBVM741.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74230P PSpice Transient Model

SBVM815.ZIP (65 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74230P Unencrypted PSpice Transient Model

SBVM816.ZIP (2 KB) - PSpice 模型
支援產品和硬體
模擬型號

TLV74233P Unencrypted PSpice Transient Model

SBVM749.ZIP (2 KB) - PSpice 模型
支援產品和硬體
參考設計

TIDA-00300 — 適用於通訊和類比輸入/輸出模組的隔離式電源架構參考設計

此參考設計提供隔離 I2C 或 SPI 通訊線路的方式。這在涉及高電壓的電網基礎設施應用(例如保護繼電器和斷路器)中通常是必要的。此參考設計提供電源隔離和訊號隔離。

支援產品和硬體
參考設計

TIDA-00420 — ADC 架構、數位隔離、廣泛輸入、16 通道、AC/DC 二進位輸入參考設計

此參考設計展現具強化型隔離的成本最佳化、可擴充 ADC 架構 AC/DC 二進位輸入模組 (BIM) 架構。10 位元或 12 位元 SAR ADC 的 16 通道,用於感測多個二進位輸入。運算放大器除了維持低每頻道成本外,也可為各輸入提供最佳訊號調節。數位隔離器 (基本型或強化型) 可用於隔離主機 MCU 或處理器。提供可測量溫度,濕度和磁場以進行診斷的設備。具可配置輸出的強化型隔離 DC/DC 電源供應器,可提供二進位模組所需的電源。

支援產品和硬體
參考設計

TIDA-010034 — IEEE802.3at Type-1 PoE 和 12V 適配器輸入到 IP 網路攝影機的負載點參考設計

乙太網路供電 (PoE) 可透過與資料相同的乙太網路纜線供電,而不會有串音,干擾或損毀資料串流的危險。此參考設計展示一款端對端電源架構的 IP 網路攝影機,可透過 PoE 或 12V 變壓器供電,並基於 TI 的 DaVinci™ 數位媒體處理器或其他應用處理器運行。此電源架構同時提供 IP 網路攝影機各種周邊設備所需的電源軌,例如:影像感測器、馬達控制、乙太網路 PHY、RS485 介面、紅外線 LED 照明、音訊、動作感測和警報介面。
支援產品和硬體
參考設計

TIDA-01579 — 適合成像應用的高效率、低輸出漣波電源供應參考設計

視訊監控系統上的負載點電源樹可利用此參考設計進行最佳化。此參考設計在以下主要參數方面具備高性能:輸出電壓精確度、電壓漣波及散熱。由於電路板面積較小,BOM 成本較低,因此可實現高性能表現。此設計採用視訊門鈴、IP 網路攝影機和無線攝影機中常見的 5-V 電源運作。
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
X2SON (DQN) 4 Ultra Librarian

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片