TLV61048
- Input voltage 2.65 V to 5.5 V (falling 2.4 V)
- Output voltage up to 14 V
- Integrated low-side FET: 85 mΩ at 3.3 VIN
- 3.7-A (Typical) switch current limit
- Up to 90% Efficiency at 3.3-V Input and 12-V Output
- 600-kHz or 1-MHz Selectable switching frequency
- Internal Compensation
- 1-µA Shutdown current
- ±2.5% Output-voltage accuracy
- PFM operation mode at light load
- Internal 2-ms soft-start time
- Thermal shutdown protection
- 2.9-mm × 1.6-mm 6-Pin SOT-23 package
The TLV61048 is a non-synchronous boost converter that provides a power-supply solution for products powered by a low-voltage super capacitor and a single-cell Li-ion battery. The TLV61048 integrates a power switch with 3.7-A typical current limit to extend the discharge capability of the input source without sacrificing maximal load delivery.
The TLV61048 could be configured at 600 kHz for higher efficiency or 1 MHz for smaller inductor and output capacitor. At the light load, the device enters into the PFM operation to achieve higher efficiency. The TLV61048 has built-in 2-ms soft start to minimize the inrush current.
The TLV61048 is available in a 2.9-mm × 1.6-mm 6-pin SOT-23 package.
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | TLV61048 14-V Output Voltage Non-synchronous Boost Converter in SOT-23 package datasheet (Rev. A) | PDF | HTML | 2019/7/2 | ||
| 應用說明 | Using External Bias to Broaden Input Voltage Range of Boost Converters | PDF | HTML | 2021/11/8 | |||
| 應用說明 | Generating Negative and Positive Voltage Rail With Boost Converter TLV61048 | 2019/12/20 |
設計與開發
如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。
TLV61048EVM-042 — TLV61048 評估模組
PMP23580 — 適用於主動式電池平衡的雙向返馳參考設計
此雙向返馳參考設計可處理 18V 至 36V 的匯流排電壓,以及 3V 至 4.2V 的單芯電池。負載電流限制為 5A。在充電狀態下,匯流排電壓可輸入 18V 至 36V ,並在 5A 充電電流下輸出高達 4.2A。電池側會有外部定電流與定電壓(CC/CV)迴路,以維持電池適當充電至電池電壓。在放電模式下,單芯電池(3V ~ 4.2V)成為 Vbus 上的輸入和輸出 27.5V。使用獨立的外部 CC 迴路,電池的輸入電流限制為 5A。匯流排電壓輸出側也具有 CV 迴路,可驗證匯流排電壓是否調節至 27.5Vout。
TIDA-010224 — 可延長電池壽命的低功耗無線攝影機參考設計
具有 Wi-Fi® 連接裝置的處理器可實現安全高品質即時視訊串流和雙向音訊串流,並具有降噪和迴聲消除功能。此設計包含紅外線 (IR) LED 與 IR Cut 濾波器,以提供夜視功能。
TIDA-050033 — 智慧電表 PLC 模組備援電源供應參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| SOT-23 (DBV) | 6 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。