首頁 放大器 比較器
首頁
放大器
比較器

TLC3702-EP

現行

強化型產品二路微功耗 Lincmos(Tm) 電壓比較器

立即訂購
產品規格表

TLC3702-EP

現行
立即訂購

產品詳細資料

Number of channels 2 Output type Push-Pull Propagation delay time (µs) 1.1 Vs (max) (V) 16 Vs (min) (V) 4 Rating HiRel Enhanced Product Iq per channel (typ) (mA) 0.009 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail In to V- Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 0.03 VICR (max) (V) 15 VICR (min) (V) 0
Number of channels 2 Output type Push-Pull Propagation delay time (µs) 1.1 Vs (max) (V) 16 Vs (min) (V) 4 Rating HiRel Enhanced Product Iq per channel (typ) (mA) 0.009 Vos (offset voltage at 25°C) (max) (mV) 5 Rail-to-rail In to V- Operating temperature range (°C) -55 to 125 Input bias current (±) (max) (nA) 0.03 VICR (max) (V) 15 VICR (min) (V) 0
SOIC (D) 8 29.4 mm² (4.9 mm × 6 mm)
  • Controlled baseline
    • One assembly/test site, one fabrication site
  • Extended temperature performance of −55°C to 125°C
  • Push-pull CMOS output drives capacitive loads without pullup resistor, IO = ±8mA
  • Very low power: 100µW typical at 5V
  • Fast response time: tPLH = 2.7µs typical with 5mV overdrive
  • Single-supply operation: 4V to 16V
  • On-Chip ESD protection
  • Controlled baseline
    • One assembly/test site, one fabrication site
  • Extended temperature performance of −55°C to 125°C
  • Push-pull CMOS output drives capacitive loads without pullup resistor, IO = ±8mA
  • Very low power: 100µW typical at 5V
  • Fast response time: tPLH = 2.7µs typical with 5mV overdrive
  • Single-supply operation: 4V to 16V
  • On-Chip ESD protection

The TLC3702-EP consists of two independent micropower voltage comparators designed to operate from a single supply and be compatible with modern HCMOS logic systems. The chips are functionally similar to the LM339 but use one-twentieth of the power for similar response times. The push-pull CMOS output stage drives capacitive loads directly without a power-consuming pullup resistor to achieve the stated response time. Eliminating the pullup resistor not only reduces power dissipation, but also saves board space and component cost. The output stage is also fully compatible with TTL requirements.

Texas Instruments LinCMOS process offers high quality analog performance to standard CMOS processes. Along with the standard CMOS advantages of low power without sacrificing speed, high input impedance, and low bias currents, the LinCMOS process offers extremely stable input offset voltages with large differential input voltages. This characteristic is designed to build reliable CMOS comparators.

The TLC3702-EP consists of two independent micropower voltage comparators designed to operate from a single supply and be compatible with modern HCMOS logic systems. The chips are functionally similar to the LM339 but use one-twentieth of the power for similar response times. The push-pull CMOS output stage drives capacitive loads directly without a power-consuming pullup resistor to achieve the stated response time. Eliminating the pullup resistor not only reduces power dissipation, but also saves board space and component cost. The output stage is also fully compatible with TTL requirements.

Texas Instruments LinCMOS process offers high quality analog performance to standard CMOS processes. Along with the standard CMOS advantages of low power without sacrificing speed, high input impedance, and low bias currents, the LinCMOS process offers extremely stable input offset voltages with large differential input voltages. This characteristic is designed to build reliable CMOS comparators.
filter 尋找其它 比較器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 4
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 TLC3702-EP Dual Micropower LinCMOS Voltage Comparator datasheet (Rev. B) PDF | HTML 2025/6/12
* 輻射及可靠性報告 TLC3702MDREP Reliability Report (Rev. A) 2012/8/17
* VID TLC3702-EP VID V6203643 2016/6/21
電子書 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017/3/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片