首頁 邏輯和電壓轉換 電壓轉換器及電平移位器 電壓轉換器
首頁
邏輯和電壓轉換
電壓轉換器及電平移位器
電壓轉換器

SN10KHT5574

現行

具有 D 型邊緣觸發正反器和 3 態輸出的八路 ECL 至 TTL 轉換器

立即訂購
產品規格表

SN10KHT5574

現行
產品規格表 立即訂購

產品詳細資料

Bits (#) 8 Data rate (max) (Mbps) 2 Topology Open drain, Push-Pull Vin (min) (V) 4.7 Vin (max) (V) 5.5 Applications GTL Features Partial power down (Ioff), Single supply Technology family TTL Supply current (max) (mA) 110 Rating Catalog Operating temperature range (°C) 0 to 70
Bits (#) 8 Data rate (max) (Mbps) 2 Topology Open drain, Push-Pull Vin (min) (V) 4.7 Vin (max) (V) 5.5 Applications GTL Features Partial power down (Ioff), Single supply Technology family TTL Supply current (max) (mA) 110 Rating Catalog Operating temperature range (°C) 0 to 70
SOIC (DW) 24 159.65 mm² (15.5 mm × 10.3 mm)
  • 10KH Compatible
  • ECL Clock and TTL Control Inputs
  • Flow-Through Architecture Optimizes PCB Layout
  • Center Pin VCC, VEE, and GND Configurations Minimize High-Speed Switching Noise
  • Package Options Include "Small Outline" Packages and Standard Plastic DIPs
  • 10KH Compatible
  • ECL Clock and TTL Control Inputs
  • Flow-Through Architecture Optimizes PCB Layout
  • Center Pin VCC, VEE, and GND Configurations Minimize High-Speed Switching Noise
  • Package Options Include "Small Outline" Packages and Standard Plastic DIPs

This octal ECL-to-TTL translator is designed to provide efficient translation between a 10KH ECL signal environment and a TTL signal environment. This device is designed specifically to improve the performance and density of ECL-to-TTL CPU/bus-oriented functions such as memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.

The eight flip-flops of the SN10KHT5574 are edge-triggered D-type flip-flops. On the positive transition of the clock, the Q outputs are set to the logic levels that were set up at the D inputs.

A buffered output-enable input (OE) can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance third state and increased drive provide the capability to drive bus lines without need for interface or pullup components.

The output-enable input OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are off.

The SN10KHT5574 is characterized for operation from 0°C to 75°C.

This octal ECL-to-TTL translator is designed to provide efficient translation between a 10KH ECL signal environment and a TTL signal environment. This device is designed specifically to improve the performance and density of ECL-to-TTL CPU/bus-oriented functions such as memory-address drivers, clock drivers, and bus-oriented receivers and transmitters.

The eight flip-flops of the SN10KHT5574 are edge-triggered D-type flip-flops. On the positive transition of the clock, the Q outputs are set to the logic levels that were set up at the D inputs.

A buffered output-enable input (OE) can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly. The high-impedance third state and increased drive provide the capability to drive bus lines without need for interface or pullup components.

The output-enable input OE does not affect the internal operations of the flip-flops. Old data can be retained or new data can be entered while the outputs are off.

The SN10KHT5574 is characterized for operation from 0°C to 75°C.

filter 尋找其它 電壓轉換器
下載

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相似於所比較的產品。
SN65ELT21 現行 5V PECL 到 TTL 轉換器 PECL to TTL translator with low propagation delay.

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 1
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 Octal ECL-to-TTL Translator w/D-Type Edge-Triggered FF & 3-State Outputs datasheet 1990/10/1

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​