首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 整合式控制 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
整合式控制 BLDC 驅動器

MCF8329A

現行

60V 無感測器磁場定向控制 (FOC) 三相 BLDC 閘極驅動器

立即訂購
產品規格表

MCF8329A

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Architecture Gate driver Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, I2C, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 65 Features Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Integrated protections UVLO, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET) Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Gate driver Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, I2C, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 65 Features Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Integrated protections UVLO, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET) Operating temperature range (°C) -40 to 125
WQFN (REE) 36 20 mm² 4 x 5
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free single shunt Field Oriented Control
    • Supports up to 1.8 kHz (electrical frequency)
    • Support flux weakening control
    • Forward and reverse windmilling support
    • Analog, PWM, freq., or I 2C based control input
    • Configurable motor startup and stop options
    • Optional closed-loop speed or power or current control or modulation index control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Improved acoustic performance with automatic dead time compensation
    • Support maximum torque per ampere (MTPA)
    • Offline motor back EMF measurement
    • Variable monitoring through DACOUT
  • 65-V Three-phase gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap-based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low-power sleep mode
    • 5-µA (maximum) at V PVDD = 24-V, T A = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Configurable non-volatile memory (EEPROM) to store device configuration
  • Supports up to 75-kHz PWM frequency for low inductance motor support
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • A suite of integrated protection features
    • Supply under-voltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Over-current protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I 2C interface
  • Three-phase BLDC gate driver with integrated sensorless motor control algorithm
    • Code-free single shunt Field Oriented Control
    • Supports up to 1.8 kHz (electrical frequency)
    • Support flux weakening control
    • Forward and reverse windmilling support
    • Analog, PWM, freq., or I 2C based control input
    • Configurable motor startup and stop options
    • Optional closed-loop speed or power or current control or modulation index control
    • 5-point configurable reference profile support
    • Anti-voltage surge prevents overvoltage
    • Improved acoustic performance with automatic dead time compensation
    • Support maximum torque per ampere (MTPA)
    • Offline motor back EMF measurement
    • Variable monitoring through DACOUT
  • 65-V Three-phase gate driver
    • Drives 3 high-side and 3 low-side N-Channel MOSFETs, 4.5 to 60-V operating voltage
    • Supports 100% PWM duty cycle
    • Bootstrap-based gate driver architecture
    • 1-A/2-A Maximum peak source/sink current
  • Integrated current sense amplifier
    • Adjustable gain (5, 10, 20, 40 V/V)
  • Low-power sleep mode
    • 5-µA (maximum) at V PVDD = 24-V, T A = 25°C
  • Speed loop accuracy: < 3% with internal clock
  • Configurable non-volatile memory (EEPROM) to store device configuration
  • Supports up to 75-kHz PWM frequency for low inductance motor support
  • Accurate LDO (AVDD) 3.3-V ±3%, 50-mA support with AVDD connected to VREG
  • Independent driver shutdown path (DRVOFF)
  • Spread spectrum for EMI mitigation
  • A suite of integrated protection features
    • Supply under-voltage lockout (UVLO)
    • Motor lock detection (3 different types)
    • Over-current protection (OCP)
    • Thermal shutdown (TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I 2C interface

The MCF8329A provides a single-chip, code-free sensorless FOC solution for applications driving brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM). The MCF8329A provides three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support a 100% duty cycle. The MCF8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

The algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current-sensing amplifier supporting a single external shunt resistor. MCF8329A integrates a large number of protection features, intended to protect the device, motor, and system against fault events.

The MCF8329A provides a single-chip, code-free sensorless FOC solution for applications driving brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM). The MCF8329A provides three half-bridge gate drivers, each capable of driving high-side and low-side N-channel power MOSFETs. The device generates the correct gate drive voltages using an internal charge pump and enhances the high-side MOSFETs using a bootstrap circuit. A trickle charge pump is included to support a 100% duty cycle. The MCF8329A can operate from a single power supply and supports a wide input supply range of 4.5 to 60 V.

The algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once it has been configured. Motor current is sensed using an integrated current-sensing amplifier supporting a single external shunt resistor. MCF8329A integrates a large number of protection features, intended to protect the device, motor, and system against fault events.
filter 尋找其它 整合式控制 BLDC 驅動器
下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
功能相同，但引腳輸出與所比較的裝置不同
MCT8329A 現行 60V 無感測器梯形控制三相 BLDC 閘極驅動器 Trap version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8
重要文件 類型 標題 格式選項 日期
* Data sheet MCF8329A Sensorless Field Oriented Control (FOC)Three-phase BLDC Gate Driver datasheet PDF | HTML 2023年 11月 28日
Application note Getting Started with MOTORSTUDIO PDF | HTML 2025年 4月 15日
Application note MCF83xx - Open Loop to Closed Loop Handoff Tuning PDF | HTML 2025年 4月 15日
Application note How to Program I2C for MCx83xx Device Family PDF | HTML 2025年 3月 24日
Application note Motor Pre-Startup Tuning for MCx83xx PDF | HTML 2025年 3月 24日
Application note MCF83xx and MCT83xx EEPROM Read and Write Procedure PDF | HTML 2025年 3月 13日
User guide MCF8329A Tuning Guide PDF | HTML 2024年 11月 5日
Product overview Cordless Vacuum Cleaner BLDC Motor Efficiency Test Data vs Competitor F PDF | HTML 2024年 10月 21日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MCF8329EVM — 適用於 60V 無感測器 FOC 三相 BLDC 閘極驅動器的 MCF8329 評估模組

MCF8329 評估模組 (EVM) 是用於開發 MCF8329A 的平台，這是一款 4.5V 至 60V 三相無刷 DC 閘極驅動器，具備無需編寫程式碼的無感測器磁場定向控制 (FOC)，適用於馬達驅動應用。此產品提供三個半橋式閘極驅動器，每個驅動器都能驅動高壓側和低壓側 N 通道功率 MOSFET。

此產品會利用內部充電幫浦產生正確的閘極驅動電壓，並利用靴帶式電路強化高壓側 MOSFET。隨附涓流電荷泵以支援 100% 工作週期。閘極驅動器架構支援最高 1A 源極與 2A 汲極的峰值閘極驅動電流。其包括板載微控制器 MSP430FR2355，可用於介接 Motor Studio 應用。

使用指南: PDF | HTML
要求
開發模組 (EVM) 的 GUI

MOTORSTUDIO — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio is an easy-to-use graphical user interface (GUI) that simplifies the tuning process of our brushless DC (BLDC) motor drivers to reduce device evaluation and product development time. The GUI allows users to quickly spin up their motors and optimize various stages of motor operation to (...)

支援產品和硬體

支援產品和硬體
下載選項
封裝 針腳 CAD 符號、佔位空間與 3D 模型
WQFN (REE) 36 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片