首頁 馬達驅動器 無刷 DC (BLDC) 馬達驅動器 整合式控制 BLDC 驅動器
首頁
馬達驅動器
無刷 DC (BLDC) 馬達驅動器
整合式控制 BLDC 驅動器

MCF8316D

現行

具有 UL 認可變體的 40V（最大值）8A（峰值）、無感測器 FOC 三相 BLDC 馬達驅動器

立即訂購
產品規格表

MCF8316D

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
Rating Catalog Architecture Integrated FET Control topology Field-oriented control (FOC), Sensorless Control interface 1xPWM, Analog, Serial Vs (min) (V) 4.5 Vs ABS (max) (V) 40 Features 5-point configurable speed profile support, Anti-voltage surge protections prevents overvoltage, Code-free Field Oriented Control (FOC), Configurable motor startup and stop options, Improved acoustic performance with automatic dead time compensation, Offline motor parameters measurement with Motor Parameter Extraction Tool (MPET), Variable monitoring through DACOUT, Windmilling support through forward resynchronization and reverse drive Operating temperature range (°C) -40 to 125
VQFN (RGF) 40 35 mm² 7 x 5
  • Functional Safety Quality-Managed Targeted (only MCF8316DULVRGFR)
    • Documentation available to aid IEC-60730-1 functional safety system design
  • Safety-Related Certifications (only MCF8316DULVRGFR)
    • UL recognized component: UL 60730-1 (File Number: E546206)
  • Safety functions (only MCF8316DULVRGFR)
    • Locked rotor protection
    • Over current (over load) protection
    • Loss of phase (no motor)
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Speed, current, power, or voltage control
    • Forward and reverse windmilling support
    • Configurable power and speed limit
    • Lead angle adjustment for high efficiency
    • Improved acoustic performance with soft-start, soft-stop and dead time compensation
    • Offline motor parameter measurement (MPET)
    • Analog, PWM, frequency, or I2C speed input
    • Configurable motor start-up and stop options
    • Flux weakening for high-speed operation
    • Anti-voltage surge (AVS) protection
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • RDS(ON) (HS + LS) at TA = 25°C : 95mΩ (typ.)
  • Low power sleep mode: Refer
    • 5µA (maximum) at VVM = 24V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Configurable EEPROM with R/W security to store device configuration
  • Built-in current sensing
  • Built-in 3.3V/5V, 170mA buck regulator
  • Built-in 3.3V, 20mA LDO regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum, PWM dithering, and slew rate for EMI reduction
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection
    • Configurable current limit
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface
  • Functional Safety Quality-Managed Targeted (only MCF8316DULVRGFR)
    • Documentation available to aid IEC-60730-1 functional safety system design
  • Safety-Related Certifications (only MCF8316DULVRGFR)
    • UL recognized component: UL 60730-1 (File Number: E546206)
  • Safety functions (only MCF8316DULVRGFR)
    • Locked rotor protection
    • Over current (over load) protection
    • Loss of phase (no motor)
  • Three-phase BLDC motor driver with integrated sensorless motor control algorithm
    • Code-free Field Oriented Control (FOC)
    • Speed, current, power, or voltage control
    • Forward and reverse windmilling support
    • Configurable power and speed limit
    • Lead angle adjustment for high efficiency
    • Improved acoustic performance with soft-start, soft-stop and dead time compensation
    • Offline motor parameter measurement (MPET)
    • Analog, PWM, frequency, or I2C speed input
    • Configurable motor start-up and stop options
    • Flux weakening for high-speed operation
    • Anti-voltage surge (AVS) protection
  • 4.5 to 35V operating voltage (40V abs max)
  • High output current capability: 8A peak
  • Low MOSFET on-state resistance
    • RDS(ON) (HS + LS) at TA = 25°C : 95mΩ (typ.)
  • Low power sleep mode: Refer
    • 5µA (maximum) at VVM = 24V, TA = 25°C
  • Speed loop accuracy: 3% with internal clock and 1% with external clock reference
  • Configurable EEPROM with R/W security to store device configuration
  • Built-in current sensing
  • Built-in 3.3V/5V, 170mA buck regulator
  • Built-in 3.3V, 20mA LDO regulator
  • Dedicated DRVOFF pin to disable (Hi-Z) outputs
  • Spread spectrum, PWM dithering, and slew rate for EMI reduction
  • Suite of integrated protection features
    • Supply under voltage lockout (UVLO)
    • Supply over voltage protection (OVP)
    • Motor lock detection
    • Configurable current limit
    • Thermal warning and shutdown (OTW/TSD)
    • Fault condition indication pin (nFAULT)
    • Optional fault diagnostics over I2C interface

The MCF8316D provides a single-chip, code-free sensorless FOC device for driving 12 to 24V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 8A peak current. The MCF8316D integrates three ½-bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (HS+LS FETs). MCF8316D integrates a buck regulator (3.3V/5V, 170mA) and LDO (3.3V, 20mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8316D, intended to protect the device, motor, and system against fault events.

Documentation for reference:

The MCF8316D provides a single-chip, code-free sensorless FOC device for driving 12 to 24V brushless-DC motors (BLDC) or Permanent Magnet Synchronous motor (PMSM) up to 8A peak current. The MCF8316D integrates three ½-bridges with 40V absolute maximum capability and a very low RDS(ON) of 95mΩ (HS+LS FETs). MCF8316D integrates a buck regulator (3.3V/5V, 170mA) and LDO (3.3V, 20mA) that can be used to power external circuits.

The FOC algorithm configuration can be stored in non-volatile EEPROM, which allows the device to operate stand-alone once the device has been configured. The device receives a speed command through a PWM input, analog voltage, variable frequency square wave or I2C command. There are a large number of protection features integrated into the MCF8316D, intended to protect the device, motor, and system against fault events.

Documentation for reference:

filter 尋找其它 整合式控制 BLDC 驅動器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 8
重要文件 類型 標題 格式選項 日期
* Data sheet MCF8316D Sensorless Field Oriented Control (FOC) Integrated FET BLDC Driver datasheet (Rev. A) PDF | HTML 2025年 5月 13日
Application note Develop algorithms and tools based on MSPM0 MCU that supports MCF831x offline burning PDF | HTML 2025年 6月 10日
Application note Getting Started with MOTORSTUDIO PDF | HTML 2025年 4月 15日
Application note MCF83xx - Open Loop to Closed Loop Handoff Tuning PDF | HTML 2025年 4月 15日
Application note How to Program I2C for MCx83xx Device Family PDF | HTML 2025年 3月 24日
Application note Motor Pre-Startup Tuning for MCx83xx PDF | HTML 2025年 3月 24日
Application note How to Optimize MCF8315 Hardware Design in Fan Application PDF | HTML 2025年 3月 17日
Application note MCF83xx and MCT83xx EEPROM Read and Write Procedure PDF | HTML 2025年 3月 13日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

MCF8316DEVM — MCF8316D 評估模組

MCF8316D 評估模組 (EVM) 可讓使用者評估 MCF8316D 馬達驅動器的性能。EVM 包含板載 FTDI 晶片，可將 USB 通訊從 micro-USB 連接器轉換至 UART。板載 MSP430FR2355 微控制器 (MCU) 可將 UART 通訊轉換為控制訊號或 I2C 格式化資料，並傳送至 MCF8316。具備許多使用者可選擇的跨接器、電阻器、連接器和測試點，有助於評估 MCF8316 裝置的眾多功能，並配置裝置的專屬設定。

使用指南: PDF | HTML
TI.com 無法提供
開發模組 (EVM) 的 GUI

MOTORSTUDIO — Motor Studio GUI for tuning and evaluating BLDC motor drivers

Motor Studio is an easy-to-use graphical user interface (GUI) that simplifies the tuning process of our brushless DC (BLDC) motor drivers to reduce device evaluation and product development time. The GUI allows users to quickly spin up their motors and optimize various stages of motor operation to (...)

支援產品和硬體

支援產品和硬體
下載選項
計算工具

BLDC-MCF831XC-TO-MCF831XD-CONVERSION-CALC — Register Map conversion tool - from MCF831xC to MCF831xD

Excel-based register map converter to automatically convert register contents from MCF831xC to MCF831xD. Input the register map of MCF831xC to generate the converted register map and use the output values directly for the MCF831xD.
支援產品和硬體

支援產品和硬體
下載
計算工具

BLDC-MOSFET-THERMAL-CALC — BLDC integrated MOSFET driver thermal calculator tool

Calculates the thermals of a BLDC integrated MOSFET driver based on user input system parameters
支援產品和硬體

支援產品和硬體
下載
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VQFN (RGF) 40 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片