首頁 放大器 電流感測放大器 類比電流感測放大器
首頁
放大器
電流感測放大器
類比電流感測放大器

LMP8480

現行

4 至 76V 電流感測放大器

立即訂購
產品規格表

LMP8480

現行
產品規格表 立即訂購

產品詳細資料

Product type Analog output Common-mode voltage (max) (V) 76 Common-mode voltage (min) (V) 4 Input offset (±) (max) (µV) 265 Input offset drift (±) (typ) (µV/°C) 6 Rating Catalog Voltage gain (V/V) 20, 60, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 270 Supply voltage (max) (V) 76 Supply voltage (min) (V) 4.5 Iq (max) (mA) 0.155 Number of channels 1 Comparators (#) 0 Gain error (%) 0.6 Gain error drift (±) (max) (ppm/°C) 60 Slew rate (V/µs) 1 Operating temperature range (°C) -40 to 125
Product type Analog output Common-mode voltage (max) (V) 76 Common-mode voltage (min) (V) 4 Input offset (±) (max) (µV) 265 Input offset drift (±) (typ) (µV/°C) 6 Rating Catalog Voltage gain (V/V) 20, 60, 100 CMRR (min) (dB) 100 Bandwidth (kHz) 270 Supply voltage (max) (V) 76 Supply voltage (min) (V) 4.5 Iq (max) (mA) 0.155 Number of channels 1 Comparators (#) 0 Gain error (%) 0.6 Gain error drift (±) (max) (ppm/°C) 60 Slew rate (V/µs) 1 Operating temperature range (°C) -40 to 125
VSSOP (DGK) 8 14.7 mm² 3 x 4.9
  • Typical Values: TA = 25°C
  • Bidirectional or Unidirectional Sensing
  • Common Mode Voltage Range: 4.0 V to 76 V
  • Supply Voltage Range: 4.5 V to 76 V
  • Fixed Gains: 20, 60, and 100 V/V
  • Gain Accuracy: ±0.1%
  • Offset: ±80 µV
  • Bandwidth (–3 dB): 270 kHz
  • Quiescent Current: < 100 µA
  • Buffered High-Current Output: > 5 mA
  • Input Bias Current: 7 µA
  • PSRR (DC): 122 dB
  • CMRR (DC): 124 dB
  • Temperature Range: –40°C to 125°C
  • Typical Values: TA = 25°C
  • Bidirectional or Unidirectional Sensing
  • Common Mode Voltage Range: 4.0 V to 76 V
  • Supply Voltage Range: 4.5 V to 76 V
  • Fixed Gains: 20, 60, and 100 V/V
  • Gain Accuracy: ±0.1%
  • Offset: ±80 µV
  • Bandwidth (–3 dB): 270 kHz
  • Quiescent Current: < 100 µA
  • Buffered High-Current Output: > 5 mA
  • Input Bias Current: 7 µA
  • PSRR (DC): 122 dB
  • CMRR (DC): 124 dB
  • Temperature Range: –40°C to 125°C

The LMP8480 and LMP8481 are precision high-side current sense amplifiers that amplify a small differential voltage developed across a current sense resistor in the presence of high input common-mode voltages. These amplifiers are designed for bidirectional (LMP8481) or unidirectional (LMP8480) current applications and accept input signals with common-mode voltage range from 4 V to 76 V with a bandwidth of 270 kHz. Because the operating power supply range overlaps the input common-mode voltage range, the LMP848x can be powered by the same voltage that is being monitored. This benefit eliminates the need for an intermediate supply voltage to be routed to the point of load where the current is being monitored, resulting in reduced component count and board space.

The LMP848x family consists of fixed gains of 20, 60, and 100 for applications that demand high accuracy over temperature. The low-input offset voltage allows the use of smaller sense resistors without sacrificing system error. The wide operating temperature range of –40°C to 125°C makes the LMP848x an ideal choice for automotive, telecommunications, industrial, and consumer applications. The LMP8480 and LMP8481 are pin-for-pin replacements for the MAX4080 and MAX4081, offering improved offset voltage, wider reference adjust range and higher output drive capabilities. The LMP8480 and LMP8481 are available in a 8-pin VSSOP package.

The LMP8480 and LMP8481 are precision high-side current sense amplifiers that amplify a small differential voltage developed across a current sense resistor in the presence of high input common-mode voltages. These amplifiers are designed for bidirectional (LMP8481) or unidirectional (LMP8480) current applications and accept input signals with common-mode voltage range from 4 V to 76 V with a bandwidth of 270 kHz. Because the operating power supply range overlaps the input common-mode voltage range, the LMP848x can be powered by the same voltage that is being monitored. This benefit eliminates the need for an intermediate supply voltage to be routed to the point of load where the current is being monitored, resulting in reduced component count and board space.

The LMP848x family consists of fixed gains of 20, 60, and 100 for applications that demand high accuracy over temperature. The low-input offset voltage allows the use of smaller sense resistors without sacrificing system error. The wide operating temperature range of –40°C to 125°C makes the LMP848x an ideal choice for automotive, telecommunications, industrial, and consumer applications. The LMP8480 and LMP8481 are pin-for-pin replacements for the MAX4080 and MAX4081, offering improved offset voltage, wider reference adjust range and higher output drive capabilities. The LMP8480 and LMP8481 are available in a 8-pin VSSOP package.

filter 尋找其它 類比電流感測放大器
下載 觀看有字幕稿的影片 影片

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 5
重要文件 類型 標題 格式選項 日期
* Data sheet LMP848x Precision 76-V High-Side Current Sense Amplifiers With Voltage Output datasheet (Rev. E) PDF | HTML 2017年 2月 27日
Application brief Improving Power Amplifier Efficiency With Current Monitors (Rev. B) PDF | HTML 2023年 7月 24日
E-book An Engineer's Guide to Current Sensing (Rev. B) 2022年 4月 12日
Application note Using a PCB Copper Trace as a Current-Sense Shunt Resistor PDF | HTML 2022年 1月 25日
User guide LMP8480EVM Current Shunt Monitors Guide (Rev. A) 2013年 3月 19日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

LMP848XMMEVM-X — LMP8480 和 LMP8481 評估工具

The Texas Instruments LMP8480/81 evaluation module (EVM) helps designers quickly evaluate the operation and performance of the LMP8480/81 76V Precision High Side Current Sense Amplifier. The EVM is ready to connect to power, load, and test instruments through the use of on-board terminals.

The EVM (...)

使用指南: PDF
View Options
模擬型號

LMP8480 PSpice Model (Rev. B)

SNVM046B.ZIP (115 KB) - PSpice Model
下載
模擬型號

LMP8480 TINA-TI Reference Design (Rev. B)

SNVM048B.TSC (2141 KB) - TINA-TI Reference Design
下載
模擬型號

LMP8480 TINA-TI Spice Model (Rev. B)

SNVM047B.ZIP (39 KB) - TINA-TI Spice Model
下載
計算工具

CS-AMPLIFIER-ERROR-TOOL — Current Sense Amplifier Comparison and Error Tool

This Excel calculator provides a comparison between two and five of our standard current sense amplifiers, delivering a chart containing the basic parameters of each device. This calculator also takes system condition inputs from users such as common-mode voltage, supply voltage, shunt resistor (...)
支援產品和硬體

支援產品和硬體
下載
設計工具

CIRCUIT060035 — 具有窗型比較器電路的雙向電流感測

此雙向電流感測解決方案採用電流感測放大器與高速雙比較器，並具備軌對軌輸入共模範圍，可在比較器輸出 (OUTA 和 OUTB) 處建立過電流 (OC) 警示訊號，如果輸入電流 (IG1) 高於 100 A 或降至 -35 A 以下。在此實作中，兩個過電流警示訊號都是高電位作動，因此當超過 100 A 或 -35 A 閾值時，比較器輸出將會變高。在兩個比較器上實作外部磁滯，因此當電流降低 10% (90 A 和 -31 A) 時，比較器輸出將回到邏輯低狀態。雖然下方電路將分流電阻器 R8 連接至接地，但相同的電路仍適用於高壓側電流感測，最高可達 INA 的共模電壓範圍。
View Options
設計工具

CIRCUIT060037 — 精密過電流閂鎖電路

這個高壓側電流感測解決方案採用電流感測放大器、含整合式參考的比較器以及 P 通道 MOSFET，以建立過電流閂鎖電路。當偵測到負載電流大於 200 mA 時，電路會中斷系統與電源的連接。比較器輸出將閂鎖 (將 P 通道 MOSFET 的閘極電壓保持在 0 V)，直到電路的電源開始循環，因為比較器會驅動 P 通道 MOSFET 的閘極，並將訊號傳送回電流感測放大器的參考針腳。
View Options
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
模擬工具

TINA-TI — 基於 SPICE 的類比模擬程式

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
使用指南: PDF
View Options
參考設計

TIDA-00302 — 具瞬態穩定性的電流分流監控器參考設計

This high-side current shunt monitor is used to measure the voltage developed across a current-sensing resistor when current passes through it.

Additionally, an external protection circuit is implemented to provide surge and fast-transient protection and demonstrate the different immunity levels to (...)

Design guide: PDF
電路圖: PDF
參考設計

PMP30047 — 兩元件鉛酸 16V... 32V@2A 電池充電器 (170V AC 至 270V AC) 參考設計

採用準共振隔離返馳來為兩個鉛酸蓄電池元件充電，從高線市電開始。此轉換器接受兩個外部訊號（參考二次側）來提供參考電壓，以設定輸出電壓和電流。由於採用了波谷切換調變，此轉換器顯示出良好的寬範圍效率。
Test report: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSSOP (DGK) 8 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片