首頁 放大器 運算放大器 (op amps) 一般用途運算放大器
首頁
放大器
運算放大器 (op amps)
一般用途運算放大器

LM6134

現行

四路、24-V、10-MHz、低功耗運算放大器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
具備升級功能，可直接投入使用替代所比較的裝置。
OPA4992 現行 四路、40-V、10.6-MHz、軌對軌輸入/輸出、低偏移電壓、低雜訊運算放大器 Wider supply range (2.7 V to 40 V), higher GBW (10.6 MHz), faster slew rate (32 V/us), lower offset voltage (1 mV), lower noise (7 nV/√Hz)

LM6134

現行
立即訂購

產品詳細資料

Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 24 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Rail-to-rail In, Out GBW (typ) (MHz) 10 Slew rate (typ) (V/µs) 14 Vos (offset voltage at 25°C) (max) (mV) 2 Iq per channel (typ) (mA) 0.36 Vn at 1 kHz (typ) (nV√Hz) 27 Rating Catalog Operating temperature range (°C) -40 to 85 Offset drift (typ) (µV/°C) 5 Input bias current (max) (pA) 140000 CMRR (typ) (dB) 107 Iout (typ) (A) 0.0043 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) -0.25 Input common mode headroom (to positive supply) (typ) (V) 0.25 Output swing headroom (to negative supply) (typ) (V) 0.032 Output swing headroom (to positive supply) (typ) (V) -0.048
Number of channels 4 Total supply voltage (+5 V = 5, ±5 V = 10) (max) (V) 24 Total supply voltage (+5 V = 5, ±5 V = 10) (min) (V) 2.7 Rail-to-rail In, Out GBW (typ) (MHz) 10 Slew rate (typ) (V/µs) 14 Vos (offset voltage at 25°C) (max) (mV) 2 Iq per channel (typ) (mA) 0.36 Vn at 1 kHz (typ) (nV√Hz) 27 Rating Catalog Operating temperature range (°C) -40 to 85 Offset drift (typ) (µV/°C) 5 Input bias current (max) (pA) 140000 CMRR (typ) (dB) 107 Iout (typ) (A) 0.0043 Architecture Bipolar Input common mode headroom (to negative supply) (typ) (V) -0.25 Input common mode headroom (to positive supply) (typ) (V) 0.25 Output swing headroom (to negative supply) (typ) (V) 0.032 Output swing headroom (to positive supply) (typ) (V) -0.048
SOIC (D) 14 51.9 mm² (8.65 mm × 6 mm) PDIP (N) 14 181.42 mm² (19.3 mm × 9.4 mm)
  • (For 5V supply, typical unless noted)
  • Rail-to-rail input CMVR: −0.25V to 5.25V
  • Rail-to-rail output
  • High gain-bandwidth: 10MHz at 20kHz
  • Slew rate: 12V/µs
  • Low supply current: 360µA/amp
  • Wide supply range: 2.7V to over 24V
  • CMRR: 100dB
  • Gain: 100dB with RL = 10kΩ
  • PSRR: 82dB
  • (For 5V supply, typical unless noted)
  • Rail-to-rail input CMVR: −0.25V to 5.25V
  • Rail-to-rail output
  • High gain-bandwidth: 10MHz at 20kHz
  • Slew rate: 12V/µs
  • Low supply current: 360µA/amp
  • Wide supply range: 2.7V to over 24V
  • CMRR: 100dB
  • Gain: 100dB with RL = 10kΩ
  • PSRR: 82dB

The LM6132 and LM6134 (LM613x) provide new levels of speed versus power performance in applications where low-voltage supplies or power limitations previously made compromise necessary. With only 360µA/amp supply current, the 10MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.

The LM613x can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This feature is particularly important when operating on low supply voltages. The LM613x also drives large capacitive loads without oscillating.

Operating on supplies from 2.7V to over 24V, the LM6132x are excellent for a very wide range of applications, from battery-operated systems with large bandwidth requirements to high-speed instrumentation.

The LM6132 and LM6134 (LM613x) provide new levels of speed versus power performance in applications where low-voltage supplies or power limitations previously made compromise necessary. With only 360µA/amp supply current, the 10MHz gain-bandwidth of this device supports new portable applications where higher power devices unacceptably drain battery life.

The LM613x can be driven by voltages that exceed both power supply rails, thus eliminating concerns over exceeding the common-mode voltage range. The rail-to-rail output swing capability provides the maximum possible dynamic range at the output. This feature is particularly important when operating on low supply voltages. The LM613x also drives large capacitive loads without oscillating.

Operating on supplies from 2.7V to over 24V, the LM6132x are excellent for a very wide range of applications, from battery-operated systems with large bandwidth requirements to high-speed instrumentation.
filter 尋找其它 一般用途運算放大器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 2
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM613x Dual and Quad, Low-Power, 10MHz, Rail-to-Rail I/O Operational Amplifiers datasheet (Rev. F) PDF | HTML 2026/6/8
電子書 The Signal e-book: A compendium of blog posts on op amp design topics PDF | HTML 2017/3/28

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

AMP-PDK-EVM — 放大器性能開發套件評估模組

放大器性能開發套件 (PDK) 是一款評估模組 (EVM) 套件，可測試通用運算放大器 (op amp) 參數，並與大多數運算放大器和比較器相容。EVM 套件提供主板和多個插槽式子卡選項，可滿足封裝需求，使工程師能夠快速評估和驗證裝置性能。

AMP-PDK-EVM 套件支援五種最熱門的業界標準封裝，包括：

  • D (SOIC-8 和 SOIC-14)
  • PW (TSSOP-14)
  • DGK (VSSOP-8)
  • DBV (SOT23-5 和 SOT23-6)
  • DCK (SC70-5 和 SC70-6)
使用指南: PDF | HTML
支援產品和硬體
模擬型號

LM6132 PSPICE Model

SNOM223.ZIP (3 KB) - PSpice 模型
支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 14 Ultra Librarian
PDIP (N) 14 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片