LM5160-Q1
- AEC-Q100 Qualified for Automotive Applications
- Temperature Grade 1: –40°C ≤ TA ≤ 125°C
- HBM ESD Classification Level 2
- CDM ESD Classification Level C5
- Wide 4.5-V to 65-V Input Voltage Range
- Integrated High-Side and Low-Side Switches
- No External Schottky Diode Required
- 2-A Maximum Load Current
- Meets CISPR 25 EMI Standard
- Adaptive Constant On-Time Control
- No External Loop Compensation
- Fast Transient Response
- Selectable Forced PWM or DCM Operation
- FPWM Supports Multi-Output Fly-Buck™
- Nearly Constant Switching Frequency
- Resistor Adjustable up to 1 MHz
- Programmable Soft-Start Time
- Prebiased Start-Up
- ±1% Feedback Voltage Reference
- Inherent Protection Features for Robust Design
- Peak Current Limiting Protection
- Adjustable Input UVLO and Hysteresis
- VCC and Gate Drive UVLO Protection
- Thermal Shutdown Protection With Hysteresis
- 14-Pin HTSSOP Package, 0.65-mm Pitch
- Create a Custom Design Using the LM5160-Q1 With the WEBENCH® Power Designer
The LM5160-Q1 is a 65-V, 2-A synchronous step-down converter with integrated high-side and low-side MOSFETs. The adaptive constant on-time control scheme requires no loop compensation and supports high step-down ratios with fast transient response. An internal feedback amplifier maintains ±1% output voltage regulation over the entire operating temperature range. The on-time varies inversely with input voltage resulting in nearly constant switching frequency.
Peak and valley current limit circuits protect against overload conditions. The undervoltage lockout (EN/UVLO) circuit provides independently adjustable input undervoltage threshold and hysteresis. The LM5160-Q1 is programmed through the FPWM pin to operate in continuous conduction mode (CCM) from no load to full load or to automatically switch to discontinuous conduction mode (DCM) at light load for higher efficiency. Forced CCM operation supports multiple-output and isolated Fly-Buck applications using a coupled inductor.
The LM5160-Q1 is qualified to automotive AEC-Q100 grade 1 and is available in 14-pin HTSSOP package with 0.65-mm pin pitch.
您可能會感興趣的類似產品
功能相同，但針腳輸出與所比較的裝置不同。
技術文件
| 重要文件 | 類型 | 標題 | 格式選項 | 下載最新的英文版本 | 日期 | |
|---|---|---|---|---|---|---|
| * | 資料表 | LM5160-Q1 Wide Input 65-V, 2-A Synchronous Buck / Fly-Buck™ DC/DC Converter datasheet (Rev. C) | PDF | HTML | 2018/10/12 | ||
| 白皮書 | How to design heating and cooling systems for HEV/EVs (Rev. A) | PDF | HTML | 2023/6/21 | |||
| 白皮書 | Valuing wide VIN, low EMI synchronous buck circuits for cost-driven, demanding a (Rev. A) | 2019/4/10 | ||||
| 應用說明 | Stability Analysis and Design of COT Type-3 Ripple Circuit | 2019/3/20 | ||||
| Application brief | Powering Drones With a Wide VIN DC-DC Converter (Rev. A) | 2019/2/5 | ||||
| 技術文章 | Why a wide VIN DC/DC converter is a good fit for high-cell-count battery-powered d | PDF | HTML | 2017/11/21 | |||
| 白皮書 | Designing isolated rails on the fly with Fly-Buck™ converters | 2015/9/29 | ||||
| 應用說明 | Is Your IGBT Gate-Driver Power Supply Optimized | 2015/3/12 | ||||
| 類比設計期刊 | Fly-Buck(TM) converter provides EMC and isolation in PLC applications | 2015/1/29 | ||||
| 應用說明 | AN-2292 Designing an Isolated Buck (Fly-Buck) Converter (Rev. C) | 2014/12/17 | ||||
| 白皮書 | Wide VIN power management ICs simplify white paper (Rev. A) | 2013/9/19 |
設計與開發
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
LM5160DNTBKEVM — LM5160DNTBKEVM 廣泛輸入 65V、1.5A 同步降壓 DC-DC 轉換器
LM5160DNTBKEVM 評估板採用恆定導通時間 (COT) 操作原理，提供全功能降壓穩壓器。此評估板在 10V 至 60V 的輸入範圍內提供 5V 輸出。此電路可提供最高 1.5A 的負載電流。此應用電路圖設定為可由 24V 額定匯流排運作。額定切換頻率約為 300kHz。高壓側和低壓側 MOSFET 皆整合至 LM5160 內。
LM5160DNTFBKEVM — LM5160DNTFBKEVM Fly-Buck 隔離偏壓電源評估板
LM5160DNTFBK 評估模組的設計旨在以 24V 額定匯流排運作，其輸入電壓範圍為 18V 至 32V。 其能夠在隔離式輸出端，向負載提供 12V/400mA 的電源。 額定切換頻率設為 300kHz。 高壓側和低壓側 MOSFET 皆整合至 LM5160 內。 EVM 電路基板旨在展示低功耗隔離式偏壓應用的小型解決方案尺寸。
FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator
此工具協助電源供應工程師根據規格選擇正確的隔離式 DC-DC 拓撲結構。根據選擇的拓撲結構，計算機還會推薦適合設計的 IC。
LM5160DNTBK-CALC — LM5160 Buck Regulator Quick Start Calculator
Welcome to the LM5160 Buck Regulator Quick Start Design Tool. This stand-alone tool facilitates and assists the power supply engineer with design of a DC/DC buck regulator based on the LM5160 65V, 1.5A COT Buck Regulator. As such, the user can expeditiously arrive at an optimized design to meet the (...)
LM5160DNTFBK-CALC — LM5160 Fly-Buck Regulator Quick Start Calculator
Welcome to the LM5160 Fly-Buck Regulator Quick Start Design Tool. This stand-alone tool facilitates and assists the power supply engineer with design of a DC/DC Fly-Buck regulator based on the LM5160 65V, 1.5A COT Fly-Buck Regulator. As such, the user can expeditiously arrive at an optimized design (...)
PMP15005 — 具有超小型耦合電感器的雙輸出隔離式 Fly-Buck 參考設計
PMP20330 — 5.5W 雙路輸出工業隔離式 Flybuck 參考設計
PMP30165 — 5W 隔離式三路輸出反相 Fly-Buck-升壓參考設計
PMP30227 — 車用隔離式 15V/4.5W 偏壓電源參考設計
TIDA-00794 — 適用於 HEV/EV 牽引逆變器的 IGBT 模組過熱保護參考設計
TIDA-00794 參考設計是一款溫度感測解決方案，可在 HEV/EV 牽引逆變器系統中提供 IGBT 過熱保護。此解決方案會透過整合至 IGBT 模組中的 NTC 熱敏電阻監控 IGBT 溫度。當 NTC 熱敏電阻溫度上升超過設定的閾值時，也會為 IGBT 閘極驅動器提供熱關機。此設計包括 IGBT 隔離式閘極驅動器、高電壓隔離、NTC 訊號調整、負載電阻器，以及 MSP430 的 I2C 介面，讓設計系統能在高功率額定值下獨立運作。
TIDA-01418 — 用於 HVAC 壓縮機的車用高電壓、高功率馬達驅動器參考設計
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| HTSSOP (PWP) | 14 | Ultra Librarian |
訂購與品質
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。