The LM5000 is a monolithic integrated circuit specifically designed and optimized for flyback, boost or forward power converter applications. The internal power switch is rated for a maximum of 80V, with a current limit set to 2A. Protecting the power switch are current limit and thermal shutdown circuits. The current mode control scheme provides excellent rejection of line transients and cycle-by-cycle current limiting. An external compensation pin and the built-in slope compensation allow the user to optimize the frequency compensation. Other distinctive features include softstart to reduce stresses during start-up and an external shutdown pin for remote ON/OFF control. There are two operating frequency ranges available. The LM5000-3 is pin selectable for either 300kHz (FS Grounded) or 700kHz (FS Open). The LM5000-6 is pin selectable for either 600kHz (FS Grounded) or 1.3MHz (FS Open). The device is available in a low profile 16-lead TSSOP package or a thermally enhanced 16-lead LLP package.
| 重要文件 | 類型 | 標題 | 格式選項 | 日期 |
|---|---|---|---|---|
| * | Data sheet | LM5000 High Voltage Switch Mode Regulator datasheet (Rev. D) | 2007年 3月 9日 | |
| Selection guide | Power Management Guide 2018 (Rev. R) | 2018年 6月 25日 | ||
| Application note | Automated Frequency Response Analyzer | 2013年 10月 9日 | ||
| White paper | Wide VIN power management ICs simplify white paper (Rev. A) | 2013年 9月 19日 | ||
| White paper | HV, Single-Chip DC/DC Reg Optimized for Flyback, Boost, or Frwd-Pwr Conv Apps | 2003年 10月 1日 | ||
| Application note | HV, single IC DC/DC reg optimizd for flyback, boost, or forward pwr cnvrtr apps | 2003年 3月 24日 |
如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。
This tool helps a power supply engineer to select the right isolated DC-DC topology based on the specifications. Depending on the topology chosen, the calculator also recommends the right IC for the design.
| 封裝 | 針腳 | CAD 符號、佔位空間與 3D 模型 |
|---|---|---|
| TSSOP (PW) | 16 | Ultra Librarian |
| WSON (NHQ) | 16 | Ultra Librarian |
建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。