首頁 電源管理 DC/DC 切換穩壓器 DC/DC 轉換器
首頁
電源管理
DC/DC 切換穩壓器
DC/DC 轉換器

LM2586

現行

具頻率同步的 4-V 至 40-V、3-A 升壓寬 VIN 返馳穩壓器

立即訂購
產品規格表

現在提供此產品的更新版本

open-in-new 比較替代產品
功能相同，但針腳輸出與所比較的裝置不同。
LM5158 現行 具備雙隨機展頻的 3-A、85-V、2.2-MHz 大範圍 VIN 升壓返馳及 SEPIC 轉換器 Newer device with higher Vout capability and higher switch current

LM2586

現行
產品規格表 立即訂購

產品詳細資料

Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 60 Vout (min) (V) 1.23 Switch current limit (typ) (A) 4 Features Enable, Frequency synchronization, Nonsynchronous rectification Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.011 Duty cycle (max) (%) 98
Rating Catalog Topology Boost, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 4 Vout (max) (V) 60 Vout (min) (V) 1.23 Switch current limit (typ) (A) 4 Features Enable, Frequency synchronization, Nonsynchronous rectification Control mode current mode Operating temperature range (°C) -40 to 125 Iq (typ) (A) 0.011 Duty cycle (max) (%) 98
TO-263 (KTW) 7 153.924 mm² (10.1 mm × 15.24 mm) TO-220 (NDZ) 7 82.6008 mm² (10.16 mm × 8.13 mm)
  • Requires Few External Components
  • Family of Standard Inductors and Transformers
  • NPN Output Switches 3 A, Can Stand Off 65 V
  • Wide Input Voltage Range: 4 V to 40 V
  • Adjustable Switching Frequency: 100 kHz to 200 kHz
  • External Shutdown Capability
  • Draws Less Than 60 µA When Shut Down
  • Frequency Synchronization
  • Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
  • Internal Soft-start Function Reduces In-rush Current During Start-up
  • Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
  • System Output Voltage Tolerance of ±4% Maximum Over Line and Load Conditions
  • Create a Custom Design Using the LM2586 With the WEBENCH® Power Designer
  • Requires Few External Components
  • Family of Standard Inductors and Transformers
  • NPN Output Switches 3 A, Can Stand Off 65 V
  • Wide Input Voltage Range: 4 V to 40 V
  • Adjustable Switching Frequency: 100 kHz to 200 kHz
  • External Shutdown Capability
  • Draws Less Than 60 µA When Shut Down
  • Frequency Synchronization
  • Current-mode Operation for Improved Transient Response, Line Regulation, and Current Limit
  • Internal Soft-start Function Reduces In-rush Current During Start-up
  • Output Transistor Protected by Current Limit, Undervoltage Lockout, and Thermal Shutdown
  • System Output Voltage Tolerance of ±4% Maximum Over Line and Load Conditions
  • Create a Custom Design Using the LM2586 With the WEBENCH® Power Designer

The LM2586 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.

Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in the datasheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.

The power switch is a 3-A NPN device that can stand-off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.

Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is ensured for the power supply system.

The LM2586 series of regulators are monolithic integrated circuits specifically designed for flyback, step-up (boost), and forward converter applications. The device is available in 4 different output voltage versions: 3.3 V, 5 V, 12 V, and adjustable.

Requiring a minimum number of external components, these regulators are cost effective, and simple to use. Included in the datasheet are typical circuits of boost and flyback regulators. Also listed are selector guides for diodes and capacitors and a family of standard inductors and flyback transformers designed to work with these switching regulators.

The power switch is a 3-A NPN device that can stand-off 65 V. Protecting the power switch are current and thermal limiting circuits, and an undervoltage lockout circuit. This IC contains an adjustable frequency oscillator that can be programmed up to 200 kHz. The oscillator can also be synchronized with other devices, so that multiple devices can operate at the same switching frequency.

Other features include soft start mode to reduce in-rush current during start up, and current mode control for improved rejection of input voltage and output load transients and cycle-by-cycle current limiting. The device also has a shutdown pin, so that it can be turned off externally. An output voltage tolerance of ±4%, within specified input voltages and output load conditions, is ensured for the power supply system.
filter 尋找其它 DC/DC 轉換器
下載 觀看有字幕稿的影片 影片

技術文件

找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 23
重要文件 類型 標題 格式選項 下載最新的英文版本 日期
* 資料表 LM2586 4-V to 40-V, 3-A Step-Up Wide VIN Flyback Regulator datasheet (Rev. E) PDF | HTML 2019/6/4
應用說明 Semiconductor and IC Package Thermal Metrics (Rev. D) PDF | HTML 2024/3/25
應用說明 Basic Calculation of a Boost Converter's Power Stage (Rev. D) PDF | HTML 2022/10/28
選擇指南 Power Management Guide 2018 (Rev. R) 2018/6/25
技術文章 Quantifying the value of wide VIN PDF | HTML 2016/6/15
技術文章 DC/DC converter datasheets – System losses demystified PDF | HTML 2016/4/25
技術文章 DC/DC converter datasheets – System efficiency demystified PDF | HTML 2016/4/18
應用說明 Inverted SEPIC Made SIMPLE 2015/7/31
應用說明 Softstart Using Constant Current Constant Voltage Approach 2015/7/24
應用說明 Working With Boost Converters 2015/6/15
應用說明 AN-2162 Simple Success With Conducted EMI From DC-DC Converters (Rev. C) 2013/4/24
應用說明 AN-1566 Techniques for Thermal Analysis of Switching Power Supply Designs (Rev. A) 2013/4/23
應用說明 AN-2155 Layout Tips for EMI Reduction in DC/ DC Converters (Rev. A) 2013/4/23
應用說明 AN-1229 SIMPLE SWITCHER PCB Layout Guidelines (Rev. C) 2013/4/23
應用說明 AN-1149 Layout Guidelines for Switching Power Supplies (Rev. C) 2013/4/23
應用說明 AN-1889 How to Measure the Loop Transfer Function of Power Supplies (Rev. A) 2013/4/23
應用說明 AN-1082 Adjust or Synchronize LM2586/88 Switching Frequency (Rev. B) 2013/4/23
應用說明 AN-1520 A Guide to Board Layout for Best Thermal Resistance for Exposed Packages (Rev. B) 2013/4/23
應用說明 Simple Techniques Minimize Cross-Coupling in Distributed Power Systems 2007/3/21
應用說明 Input and Output Capacitor Selection 2005/9/19
更多文件說明 SEM1600 Topic 4: Constructing Your Power Supply – Layout Considerations 2005/7/12
應用說明 AN-643 EMI/RFI Board Design (Rev. B) 2004/5/3
應用說明 Understanding Boost Power Stages In Switchmode Power Supplies 1999/3/4

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

計算工具

FLYBUCK-FLYBACK-DESIGN-CALC — Flybuck / Flyback Calculator

此工具協助電源供應工程師根據規格選擇正確的隔離式 DC-DC 拓撲結構。根據選擇的拓撲結構，計算機還會推薦適合設計的 IC。

支援產品和硬體
封裝 針腳 CAD 符號、佔位空間與 3D 模型
TO-263 (KTW) 7 Ultra Librarian
TO-220 (NDZ) 7 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片